Name of Equipment

Name of Equipment

LABTOP® Micro Controller Based Dialysis Chair
    Control System Micro controller based controller with remote controller
    Material Of construction Mild steal fabricated body dully powder coated
    Possession Adjustment By actuator.
    Weight lifting Capacity 150 Kg
    Length of the seat 210 cm
    Width of the seat 67 cm
    Dept of the seat 60 cm
    Width of the arm rest 15 cm
    Thickness of upholstery 10 cm
    Weight 75kg
    Upholstery Maintenance free eco lather
    Color Blue
    Movement 4 numbers castor wheels with locking
    Power Works on 230 V AC single phase 50Hz.
    Power consumption. 100 / 150 W
    Other features Based on homodynamic principles. Tilt and height adjustments can be done by using remote control
    Certifications ISO 9001: 2008 and ISO 13485 : 2012
    Documentations LABTOP will provide User manual with Material Test Certificates and Calibration reports

 Name of Equipment

LABTOP® Micro Controller Based Blood collection monitor
    Control System Micro controller based controller.
    Alarm Audio Visual Alarm if the flow is less than 20 ml per minute At the end of the Collection
    Outer body Mild steel powder coated
    Speed of rocker 10 RPM
    Accuracy ± 2 RPM
    Settable volume 1 to 999 ml.
    Readability 1 ml/1g
    Pinching Motorized pinching at the end of collection
    Display user friendly LCD display with messages
    Blood bag Tray ABS molded
    Display parameters Weight and volume of collection, duration of collection Previous collection records.
    Calibration Auto calibration from the control panel
    Power Works on 90- 230 V AC single Phase 50Hz
    Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
    Documentations LABTOP will provide Calibration reports

   Name of Equipment

LABTOP® Micro Controller Based Blood Bank scale
    Control System Micro controller based controller
    Outer body ABS molded
    Maximum Weighing range 3 kg
    Accuracy 1ml / 1 g
    Readability 1 ml/1g
    Calibration Auto calibration from the control panel
    Display LCD display
    Weighing Pan Stainless steel
    Display parameters Weight and volume of Plasma, platelets and RBC
    Power Works on 90- 230 V AC single Phase 50Hz
    Certifications ISO 9001: 2008 and ISO 13485 : 2012
    Documents User manual with calibration test report
    Documentations LABTOP will provide Calibration reports

 Name of the Equipment

LABTOP® Plasma expresser
    Control System Micro controller based controller./ Manual
    Material of construction Mild steel powder coated
    Sensor Infra red
    Pressure Plate Spring loaded Acrylic
    Control Manual and Automatic
    Alarms Audio visual
    Clamping Motor activated
    Power Works on 90- 230 V AC single Phase 50Hz
    Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
    Documentations LABTOP will provide user manual and Calibration reports

    Name of Equipment

LABTOP® Micro Controller Based Blood Bag Tube Sealer
    Control System Micro controller based controller.
    MOC Mild steel powder coated
    Sealing Time 1.4 Seconds
    Oscillation Frequency 40.68
    Radio frequency output 15 W
    Input Voltage 230 V Works on 90- 230 V AC single Phase
    Frequency 50Hz
    Power consumption 80 VA
    Certifications ISO 9001: 2008 and ISO 13485 : 2012
    Documentations LABTOP will provide user manual and Calibration reports

 Name of Equipment

LABTOP® Micro Controller Based Blood Bank Refrigerator
    Control System Micro controller based temperature indicator cum controller with Digital Display and PT 100 sensor
    Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
    Refrigeration System Hermetically Sealed CFC Free Emerson Compressor with R 134a refrigerant
    Air Circulation Motor and blower arrangement to have uniformity of temperature under loaded condition.
    Insulation 3” Thick CFC free PUF Insulation.
    Lighting Interior illumination for working area.
    Observation Door Inside see through unbreakable acrylic door
    Validation Port 50 mm validation Port with silicon rubber seal to insert sensor for validation purpose
    Trays Specially designed Stainless Steel Baskets.
    Other Castor wheels, MCB, Adjustable Tray Height arrangement. Heavy duty latch with lock & key
    Power Works on 230 V AC single phase 50Hz.
    Other Castor wheels, MCB. Heavy duty latch with lock & key
    Safety feature 180Sec. compressor ‘ON’ delay timer to safe guard the compressor. Password protected keypad lock
    Documentation Calibration certificate with Supporting Document of ERTL ( Govt. of India)
    Certification IS0-9001:2008, ISO-13485: 2012 and CE

 Name of Equipment

LABTOP® Micro Controller based Ice lined Refrigerator
    Control System Micro Controller based temperature indicator cum controller with digital display and PT 100 sensor.
    Alarm Audio Visual Alarm if the temperature Deviates from the preset temperature
    Refrigeration System Hermetically Sealed CFC Free Emerson Compressor with R-134a refrigerant
    Temperature Holding Time 24 Hours from 2°C to 10°C (with 15 Kg of load)
    Construction Triple walled construction
    Inner Chamber Made of Stainless Steel SS-304, I mm thick ,
    Middle Chamber Made of GI Sheet
    Outer Chamber Made of Powder Coated CRCA sheet, 18 SWG (1.2 mm)
    Insulation 75 mm thick Polyurethane Foam (PUF) insulation between the middle and outer chamber
    Lock Self contained lock and key to prevent unauthorized access
    Hot Line Anti-moisture entry using hot line at the mouth of the cabinet
    Other Castor wheels, MCB, Adjustable Tray Height arrangement. Heavy-duty latch with lock & key
    Power Works on 230 V AC single phase 50Hz.
    Safety Features 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
    Certifications ISO 9001: 2008 and ISO 13485 : 2012 certification
    Documentations LABTOP will provide User manual and Calibration reports

SPECIFICATIONS

Temperature Range 2°C to 8°C

  Name of Equipment

LABTOP® Micro Controller based Laboratory Refrigerator
    Control System Micro Controller based temperature indicator cum controller with digital display and PT 100 sensor.
    Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
    Refrigeration System Hermetically Sealed CFC Free Emerson Compressor with R-134a refrigerant
    Air Circulation Motor and blower arrangement to have uniformity of temperature under loaded condition.td>
    Lighting Interior illumination for working area.
    Observation Door Inside see through unbreakable acrylic door
    Trays Stainless Steel perforated trays.
    Insulation 3” Thick CFC free PUF Insulation.
    Other Castor wheels, MCB, Adjustable Tray Height arrangement. Heavy-duty latch with lock & key
    Power Works on 230 V AC single phase 50Hz.
    Safety Features 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor. Additional safety thermostat to cut off the air heater in case of overshoot of temperature.
    Certifications ISO 9001: 2008, ISO 13485 : 2012
    Documentations LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports

  Name of the Equipment

LABTOP® Micro Controller based Vertical Plasma Freezer
    Control System Micro controller based temperature indicator cum controller with digital display and PT 100 sensor.
    Temperature Recorder 7 Days Circular Chart Temperature Recorder
    Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
    Refrigeration System Hermetically Sealed CFC Free Emerson compressor
    Trays Specially designed Stainless Steel Plasma basket.
    Insulation 3” Thick CFC free PUF Insulation.
    Sub door Insulated Stainless steel
    Other Castor wheels, MCB, Heavy duty latch with lock & key
    Power Works on 230 V AC single phase 50Hz.
    Safety Features 1. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
2. Password protected keypad lock
    Certifications ISO 9001: 2008 , ISO 13485:2012
    Documentations LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports

   Name of Equipment

LABTOP® Micro Controller based Ultra Vertical Plasma Freezer
    Control System Micro controller based temperature indicator cum controller with Digital display and PT 100 sensor.
    Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
    Temperature Recorder 7 Days Circular Chart
    Refrigeration System Hermetically Sealed CFC Free single stage refrigeration with Emerson Compressor
    Trays Specially designed Stainless Steel Plasma basket.
    Inner chamber IMade of Stainless steel 304, 0.8 mm thick
    Outer Chamber Made of Mild steel, 1.0 mm thick duly powder coated
    Insulation 3” Thick CFC free PUF Insulation.
    Other Castor wheels, MCB, Heavy duty latch with lock & key
    Certifications ISO 9001: 2008 and ISO 13485:2012
    Documentations User manual with Calibration Test reports
    Safety Features 1. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor. 2. Password protected keypad lock

   Name of Equipment

LABTOP® Micro Controller Based platelet Incubator
    Control System Micro controller based temperature indicator cum controller with digital display and PT 100 sensor.
    Alarm Audio Visual Alarm if the temperature deviates from the preset Temperature
    Refrigeration System Hermetically Sealed CFC Free Emerson Compressor with R-134a refrigerant
    Air Circulation Motor and blower arrangement to have uniformity of temperature under loaded condition.
    Heating System U shaped S.S. Nichrome wire air heaters.
    Insulation 3” Thick CFC free PUF Insulation
    Inner chamber Stainless steel 304, 0.8 mm thick
    Outer chamber Mild steel powder coated, 1.0 mm thick
    Lighting Interior illumination for working area.
    Observation Door See through unbreakable acrylic door
    Other Castor wheels, MCB, with lock & key
    Power Works on 230 V AC single phase 50Hz.
    Temperature Recorder 7 days circular chart
    Safety feature 1. Additional safety thermostat to cut off the equipment in case of overshoot of temperature.
2. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
3. Password protected keypad lock
    Certifications ISO 9001: 2008 , ISO 13485:2012 and CE
    Documentations User manual with Calibration Test reports

    Name of Equipment

LABTOP® Micro Controller Blood bank Refrigerated Centrifuge
    Control System Micro controller based temperature/speed controller with digital LED and Graphical Display
    Material of construction Mild steel duly powder coated
    Refrigeration System CFC Free Refrigeration System
    Centrifuge Motor Brushless Induction motor
    Number of Program memory up to 30 Nos
    Display Set values and process values
    Noise level 65db
    Size (LxWxH) 960 x 860 x 1200 mm
    Weight LBC-12-500 kg /LBC-6 -250 kg
    Door lock Automatic motorized door lock
    Door mechanism 2 nos. of Pneumatic spring hinges
    Other Castor wheels, MCB and emergency door key
    Power Works on 230 V AC single Phase 50Hz.
    Certification ISO 9001: 2008 and ISO 13485 : 2012
    Documentations User manual and calibration test reports
    Safety Feature 180 Sec. compressor ‘ON’ delay timer to safe guard the compress Unbalance cut off, safety switch for door

    Name of Equipment

LABTOP® Micro Controller Based platelet Agitator
    Control System Micro controller based indicator cum controller with digital display.
    Motion failure Alarm Audio Visual Alarm if the speed deviates from the preset speed
    Display LED display of RPM
    RPM 70 ±5
    Power Works on 230 V AC single phase 50Hz.

   Name of Equipment

LABTOP® Micro Controller based Cryoprecipitate bath
    Control System Micro controller based temperature indicator cum controller with digital Display and PT 100 sensor.
    Alarm Audio visual alarm if the temperature deviates from the preset temperature
    Display Set Value and Process Value
    Refrigeration System Hermetically Sealed CFC Free Emerson Compressor
    Inner Chamber Stainless steel 316 and 1mm thick
    Outer chamber Mild steel powder coated
    Plasma holder Acrylic Plasma Bag holder
    Circulation Integrated pump for internal circulation
    Insulation 3” Thick CFC free PUF Insulation
    Other Castor wheels, MCB,
    Certifications ISO 9001: 2008, ISO 13485 and CE certification
    Power Works on 230 V AC single phase 50Hz
    Safety Features 1. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor. 2. Password protected Keypad lock.

   Name of Equipment

LABTOP® Micro Controller Based VDR Shaker
    Control System Micro controller based speed indicator cum controller with digital display
    Platform Universal Platform to accommodate interchangeable clamps of assorted sizes for different capacity of flasks
    Auto restart Auto- restart at preset RPM in case of power failure
    Timer 0-99 minutes
    Display LED
    Material of construction ABS molded
    Load capacity 3kg /8 kg
    Dimensions 280 x 270 x 110
    Direction Reverse and forward available on LOS-30
    Power Works on 230 V AC single phase 50Hz.
    Platform Interchangeable
    Motor Brushless D. C. Motor
    Drive Variable Drive
    Speed accuracy ± 1 rpm
    Certifications ISO 9001: 2008 and ISO 13485 : 2012
    Documentations LABTOP will provide user manual and calibration reports

    Name of Equipment

LABTOP® Biomixer
    Control System Step less speed regulator
    Display N A
    Mixing motion Orbital
    Amplitude 1.5 mm
    Speed 2500 rpm
    Material of Construction ABS plastic molded
    Power Works on 230 V AC single phase 50Hz
    Company certifications ISO 9001:2008and ISO 13485:2012
    Documentations User manual and calibration report.

 Name of Equipment

LABTOP® Micro controller (PID) based Stability Test Chamber
    Air Circulation Motor and blower arrangement to have uniformity of Temperature under loaded condition. ( 2 blowers for 400 Liters and above)
    Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
    Trays Stainless Steel trays.
    Lighting Interior illumination for working area.
    Insulation 3” Thick CFC free PUF Insulation.
    Heating System U shaped S.S. Nichrome wire air heaters.
    Observation Door Inside see through unbreakable acrylic door
    Refrigeration System Hermetically Sealed CFC Free Emerson Compressor with R 134a refrigerant having state of art by pass system for continues run of compressor.
    Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
    Control System Precise control of temperature and humidity by using CE approved micro controller based PID controller (Auto tuning type)
    Validation Port 50 mm validation Port with silicon rubber seal to insert sensor for validation purpose.
    Power Works on 230 V AC single phase 50Hz
    Other Castor wheels, MCB, Adjustable Tray Height arrangements. Heavy duty latch with lock & key
    Safety Features 1. Float switch to cutoff the mains supply in case of low water level in the boiler tank.2. Dedicated safety controller with separate sensor to cut off the supply in case of overshoot and undershoot of Temperature giving audio visual alarm.3. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.4. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
    Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
    Documentations LABTOP will provide IQ, OQ, PQ documents with material test certificates and calibration reports

  Name of Equipment

LABTOP Micro controller (PID) based Plant Growth Chamber
    Air Circulation Two chamber blowers to have uniformity of Temperature under loaded condition. (Above 400Liters)
    Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
    Trays Stainless Steel perforated trays.
    Lighting Interior illumination for working area
    Insulation 3” Thick CFC free PUF Insulation.
    Heating System U shaped S.S. Nichrome wire air heaters
    Observation Door Inside see through unbreakable acrylic door
    Refrigeration System Hermetically Sealed CFC Free Emerson Compressor with R- 134a refrigerant having state of art by pass system for continues run of compressor
    Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
    Control System Precise control of temperature and humidity by using CE Approved micro controller based PID controller (Auto tuning type)
    Validation Port 50 mm validation Port with silicon rubber seal to insert sensors for validation purpose
    Power Works on 230 V AC single phase 50Hz
    Other Castor wheels, MCB, Adjustable Tray Height arrangement. Heavy duty latch with lock & key.
    Safety Features 1. Float switch to cutoff the mains supply in case of low water level in the boiler tank. 2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature. 3. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
    Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
    Documentations LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports

   Name of Equipment

LABTOP® PLC based Walk-in-Stability Test Chamber
    Control System Programmable Logic Control with Safety controller, auto changeover of Standby systems & other event managements with 3.8” Color HMI with touch screen and Ethernet connectivity
    Air Circulation Blowers to have uniformity of Temperature under loaded condition.
    Alarm Audio Visual Alarm if the temperature deviates from the preset Temperature
    Lighting Interior illumination for working area.
    Insulation 80mm Thick CFC free PUF Insulated modular cabinet
    Heating System U shaped S.S. Nichrome wire air heaters
    Observation Door Inside see through unbreakable acrylic door
    Refrigeration System Hermetically Sealed CFC Free Emerson Compressor with R- 22 refrigerant having state of art By pass system for continues run compressor
    Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
    Power Works on 230/430 V AC single / three phase 50Hz
    Other MCB, Heavy duty latch with lock & key.
    Safety Features

Float switch to cutoff the mains supply in case of low water level in the boiler tank.
Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.
180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.

    Certifications ISO 9001: 2008 and ISO 13485 : 2012
    Documentations LABTOP will provide IQ, OQ, PQ documents with material Test certificates And calibration reports

  Name of Equipment

LABTOP® PLC based Walk-in-Cooling Incubator (B.O.D Incubator)
    Control System PLC with 4 channel RH and 4 channel temperature data logger, Safety controller, auto changeover of Standby systems & other event Managements with 3.7” HMI with touch screen, USB printing port and Ethernet connectivity
    Material Of construction Modular Prefabricated panels with cam & lock arrangement
    Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
    Air Circulation Motor and blower arrangement to have uniformity of Temperature under loaded condition.
    Heating System U shaped S.S. Nichrome wire air heaters.
    Insulation 3” Thick CFC free PUF Insulation.
    Lighting Interior illumination for working area.
    Observation window See through double pane glass observation window of 1 ft. x 1.5 ft
    Validation Port 50 mm validation Port with silicon rubber seal to insert sensor for validation purpose.
    Trays Stainless Steel perforated trays.
    Power Works on 230 V AC single phase 50Hz.
    Safety feature 1. Additional safety thermostat to cut off the equipment in case of overshoot of temperature. 2. safety alarm system is provided in case of any emergency

    Name of Equipment

LABTOP® PLC Based Walk-In Bacteriological Incubator
    Control System PLC with 4 channel RH and 4 channel temperature data logger, Safety controller, auto changeover of Standby systems & other event Managements with 3.7” HMI with touch screen, USB printing port and Ethernet connectivity
    Material Of construction Modular Prefabricated panels with cam & lock arrangement
    Air Circulation Motor and blower arrangement to have uniformity of Temperature under loaded condition.
    Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
    Lighting Interior illumination for working area.
    Insulation 3” Thick CFC free PUF Insulation.
    Heating System U shaped S.S. Nichrome wire air heaters.
    Observation window See through double pane glass observation window of 1 ft. x 1.5 ft
    Insulation 3” Thick CFC free PUF Insulation.
    Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
    Power Works on 230/430 V AC single/ three phase 50Hz
    Trays Not provided with the equipment
    Other MCB, Heavy duty latch with lock & key.
    Safety Features 1. Additional safety thermostat to cut off the equipment in case of overshoot of temperature. 2. safety alarm system is provided in case of any emergency

    Name of Equipment

LABTOP® PLC based walk-in-Laboratory Refrigerator
    Control System PLC with 8 channel temperature data logger, Safety controller,auto changeover of Standby systems & other event Managements with 3.7” HMI with touch screen, USB printing port and Ethernet connectivity
    Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
    Refrigeration System Hermetically Sealed CFC Free Emerson / Danfoss Compressor with R-134a refrigerant
    Air Circulation Motor and blower arrangement to have uniformity of temperature under loaded condition.
    Lighting Interior illumination for working area.
    Observation window Inside see through unbreakable acrylic door
    Trays Stainless Steel perforated trays.
    Other MCB, Adjustable Tray Height arrangement. Heavy-duty latch with lock & key
    Power Works on 230 V AC single phase 50Hz.

  Name of Equipment

LABTOP® Micro Controller based Vertical Biofreeze
    Control System Micro controller based temperature indicator cum controller with digital display and PT 100 sensor.
    Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
    Refrigeration System Hermetically Sealed CFC Free Emerson Compressor.
    Trays Stainless Steel perforated trays
    Insulation 3” Thick CFC free PUF Insulation
    Lighting Interior illumination for working area.
    Other Castor wheels, MCB, Heavy duty latch with lock & key
    Power 1. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
2. Password protected Keypad lock.
    Safety feature Additional safety thermostat to cut off the air heater in case of overshoot of temperature
    Certification ISO 9001: 2008 , ISO 13485:2012
    Documentations LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports

   Name of Equipment

LABTOP® Micro Controller based Vertical Deep Freezer
    Control System Micro controller based temperature indicator cum controller with digital display and PT 100 sensor.
    Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
    Refrigiration System Hermetically Sealed CFC Free Emerson Compressor
    Trays Stainless Steel perforated trays.
    Insulation 3” Thick CFC free PUF Insulation.
    Other Castor wheels, MCB, Heavy duty latch with lock & key
    Power Works on 230 V AC single phase 50Hz.
    Safety Features 1. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.2. Password protected Keypad lock.
    Certifications ISO 9001: 2008 and ISO 13485 : 2012
    Documentations LABTOP will provide user manual and Calibration reports

    Name of Equipment

LABTOP® Micro Controller based Deep Freezer Horizontal
    Control System Micro controller based temperature indicator cum controller with digital display and PT 100 sensor.
    Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
    Refrigeration System Hermetically Sealed CFC Free Emerson Compressor
    Trays Stainless Steel perforated trays.
    Insulation 3" Thick CFC free PUF Insulation.
    Other Castor wheels, MCB, Heavy duty latch with lock & key
    Power Works on 230 V AC single phase 50Hz.
    Safety Features 1. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
2. Password protected Keypad lock.

    Name of Equipment

LABTOP® Micro Controller based Vertical Biofreeze
    Control System Micro controller based temperature indicator cum controller with digital display and PT 100 sensor.
    Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
    Refrigeration System Hermetically Sealed CFC Free single stage refrigeration system with Danfoss compressor
    Trays Specially designed Stainless Steel tray
    Insulation 3” Thick CFC free PUF Insulation
    Backup Battery backup for display in case of power failure
    Other Castor wheels, MCB, Heavy duty latch with lock & key
    Power Works on 230 V AC single phase 50Hz.
    Safety feature 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor
    Certification ISO 9001: 2008 , ISO 13485 : 2012
    Documentations LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates And Calibration reports

   Name of Equipment

LABTOP® Micro Controller Based Cooling (BOD) Incubator
    Control System Micro controller based temperature indicator cum Controller with digital display and PT 100 sensor
    Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
    Refrigeration System Hermetically Sealed CFC Free Emerson Compressor with R 134a refrigerant
    Air Circulation Motor and blower arrangement to have uniformity of Temperature under loaded condition.
    Heating System U shaped S.S. Nichrome wire air heaters
    Insulation 3” Thick CFC free PUF Insulation.
    Lighting Interior illumination for working area.
    Observation Door Inside see through unbreakable acrylic door
    Validation Port 50 mm validation Port with silicon rubber seal to insert sensor for validation purpose
    Trays Stainless Steel perforated trays.
    Other Castor wheels, MCB, Adjustable Tray Height arrangement. Heavy duty latch with lock & key
    Power Works on 230 V AC single phase 50Hz.
    Safety feature 1. Additional safety thermostat to cut off the equipment in case of overshoot of temperature.
2. Password protected keypad
3. 180 seconds time delay for compressor
    Certification ISO 9001: 2008 , ISO 13485:2012
    Documentation LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports

    Name of the Equipment

LABTOP® Micro Controller Based Orbital Shaking Incubator
    Control System Micro controller based temperature indicator cum controller with digital display and PT 100 sensor.
    Refrigeration System Hermetically Sealed CFC Free Emerson compressor with R 134a refrigerant
    Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
    Air Circulation Motor and blower arrangement to have uniformity of temperature under loaded condition.
    Heating System U shaped S.S. Nichrome wire air heaters.
    Insulation 3” Thick CFC free PUF Insulation.
    Lighting Interior illumination for working area.
    Observation Door Inside see through unbreakable acrylic door
    Other MCB, Adjustable Tray Height arrangement. Heavy duty latch with lock & key
    Power Works on 230 V AC single phase 50Hz.
    Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
    Documentations LABTOP will provide IQ, OQ, PQ documents with material test certificates and calibration reports

   Name of Equipment

LABTOP® Micro Controller Based Micro plate shaker incubator
    Control System Micro controller
    Display LCD Display with back light
    Motor Brushless DC motor
    Amplitude 2 mm
    Outer body ABS plastic
    Temperature uniformity ± 1.0
    Timer 1-99 hrs.
    Input Voltage Works on 230/110 V AC single 50/60Hz.
    Certification ISO 9001: 2008 , ISO 13485 : 2012
    Documentation User manual with calibration test reports

  Name of Equipment

LABTOP® Laminar Air Flow
    Work Table Stainless Steel (304)
    Height Of the stand 650 mm
    Filter Type HEPA filter
    Efficiency 99.99%
    Particle Retention 0.3 Micron
    Cleanliness Class 100
    Air flow velocity 0.3 – 0.5 m/s
    Illumination of work surface Fluorescent tube light
    Blower-motor assembly Dynamically balanced
    Noise level 65 decibel
    Static pressure measurement Magnehelic Gauge
    Pre Filter Disposable, Non washable polyester fiber
    Ultra violet tube light 3 feet, 30 Watt - PHILIPS - HOLLAND make - 1 No.
    Front Sash Motorised shattered proof Glass door
    Other Castor wheels, MCB.
    Certifications ISO 9001: 2008 , ISO 13485 and CE
    Documentations LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports

   Name of Equipment

LABTOP® Micro Controller Based Laboratory rocker
    Control System Micro controller based speed indicator cum controller with LCD display
    Rocking Platform Mild steel powder coated with non slip mat
    Rocking motion See-saw rocking
    Material of construction ABS molded
    Operation Continues
    Power Works on100 - 230 V AC single phase
    Frequency 50Hz.
    Power consumption 50 watts
    Weight of LCR-180 3 kg
    Weight of LCR-330 9 kg
    Motor Brushless D. C. Motor
    Drive Variable Drive
    Speed accuracy ± 1 rpm
    Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
    Documentations LABTOP will provide user manual & and calibration reports

    Name of the Equipment

LABTOP® Micro Controller Based Multi Tube Biomixer
    Control System Micro controller based controller with LCD display
    Display Speed and time
    Amplitude 3.6 mm
    Speed 500 – 2500 rpm
    Speed accuracy ± 25
    Timer 0-99.99 Hrs
    Alarm Audio Visual
    Dimensions of the tray 31 x 18cm
    Outer Dimensions 426 x 250 x 480mm
    MOC Mild steel powder coated
    Power Works on 230 V AC single phase 50Hz.
    Company certifications ISO 9001:2008 and ISO 13485:2012
    Documentations User manual and calibration report

  Name of the Equipment

LABTOP® Micro Controller Based Tube roller
    Control System Micro controller based controller with LCD display
    Display Speed and time
    Motion Rocking and Rolling
    Speed 0 – 70 rpm
    Amplitude 24 mm
    Timer 0-1199 min
    Alarm Audio Visual
    Number of Rollers 6 Nos.
    Outer Dimensions 450 x 260 x 120mm
    MOC ABS molded
    Power Works on 230 V AC single phase 50Hz.
    Company certifications ISO 9001:2008 and ISO 13485:2012
    Documentations User manual and calibration report

    Name of Equipment

LABTOP® Micro Controller Based Dry Bath Incubator
    Control System Micro controller based temperature indicator cum controller with LCD display and PT 100 sensor.
    Display Set Value and Process Value
    Power Works on 230 V AC single phase 50Hz
    Timer 0-99.99 Hrs
    Safety feature Safety thermostat to cut off the heater in Case of overshoot of temperature.
    MOC ABS molded
    Alarm Audio visual
    Company Certifications ISO: 13485: 2012 , ISO 9001: 2008 and CE

 Name of Equipment

LABTOP® Micro Controller Based Mini Dry Bath Incubator
    Control System Micro controller based temperature indicator cum controller and PT 100 sensor
    Display LCD, Set Value and process Value
    Power Works on 230 V AC single phase 50Hz.
    Heating block Aluminum
    Timer 0-99.99 Hrs
    Material of construction ABS molded
    Alarm Audio visual
    Documentation User manual with calibration certificates
    Safety feature safety cut off the air heater in case of overshoot of temperature.
    Certifications ISO 9001: 2008, ISO 13485 : 2012