1. Product kept in the hopper slides down to the enclosed chamber, where it is milled in between beaters and screen to the required mesh/micron size which can be collected at the bottom in the container.
2. Quality and output depends upon the three main variables.
3. Beaters shape. (knife/impact forward)
4. Speed.
5. Screen size.
6. Knife edge for coarse or large particles and impact or flat edge for finer particles. High speed for fine grinding, low speed for coarser particles. A wide range of screen is available for various process needs.
1.Direction of beaters can be changed by reversible switch.
2.All contact parts can be easily and quickly dismantled and cleaned.
3.Machine is designed for continuous operation.
4.Cylindrical screen for higher output.
5.Castor wheels provided for mobility.
6.Flameproof electrical components can be provided at extra cost.
7.Beaters and scraper blades of S.S. 304 quality.
8.S. S. Perforated Screens:
0.5, 1.0, 1.5 mm Hole Dia.
2, 3, 4, 5, 6 mm Hole Dia.
7, 8, 10, 15, 20, 25 mm Hole Dia.
9.S. S. Wire Mesh Sieve:
4, 6, 8, 10, 12, 14, 16, 20, 24, 30, 40, 50, 40, 50, 60 Mesh.
80, 100 Mesh.