This single mode fibre has low water peak, characterized by the attenuation at 1383nm being less than the attenuation at 1310nm.
Due to Its low water peak characteristics and excellent stability performance against hydrogen, it is suitable for entire wavelength range from 1260nm to 1625 nm.
This fibre is fully compliant with ITU-T 652D.
 

Duct Cable is designed to be pulled into ducts in service ducts of an optical cable communication network. Its non-metallic characteristic enables it to be installed in an environment where there is electrical interference, for example alongside power lines. The cable design is available in unitube (up to 24 loose fibres), multitube (up to 144 fibres) fibre ribbon cable (48 to 576 fibres). The design is lightweight and flexible and able to withstand normal installation forces of strain, crush, bend and twist. Aramid or glass yarn can be added for extra axial pulling strength and glass yarn or polyamide can be used as protection against rodents.

Duct Cable is designed to be pulled into ducts in service ducts of an optical cable communication network. Its non-metallic characteristic enables it to be installed in an environment where there is electrical interference, for example alongside power lines. The cable design is available in unitube (up to 24 loose fibres), multitube (up to 144 fibres) fibre ribbon cable (48 to 576 fibres). The design is lightweight and flexible and able to withstand normal installation forces of strain, crush, bend and twist. Aramid or glass yarn can be added for extra axial pulling strength and glass yarn or polyamide can be used as protection against rodents.
 

Duct Cable is designed to be pulled into ducts in service ducts of an optical cable communication network. Its non-metallic characteristic enables it to be installed in an environment where there is electrical interference, for example alongside power lines. The cable design is available in unitube (up to 24 loose fibres), multitube (up to 144 fibres) fibre ribbon cable (48 to 576 fibres). The design is lightweight and flexible and able to withstand normal installation forces of strain, crush, bend and twist. Aramid or glass yarn can be added for extra axial pulling strength and glass yarn or polyamide can be used as protection against rodents.

Direct Burial Cable is designed to be placed directly under the ground either by trenching or ploughing. The metallic cable is armoured with corrugated steel tape that provides good protection against rodents and allows the cable to retain outstanding flexibility for easy installation. The cable design is available in unitube (up to 24 fibres) and multitube single sheathed/ double sheathed construction (up to 96 fibres).

Description / Specification of Droplite Cable

We are involved in offering a wide range of Droplite Cable to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Droplite Cable. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Drop Cable Flat Design

We are involved in offering a wide range of Drop Cable Flat Design to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Drop Cable Flat Design. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Figure 8 Design

We are involved in offering a wide range of Figure 8 Design to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Figure 8 Design. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Brining fibre optics to the homes of India was one of our aim and we are proud to say that we achieved it successfully. AKSH has a number of blown fibre cables and micro cables suitable for Fibre-To-The Home (FTTH) applications for the installation into duct/micro ducts. Extending optical fibre�s reach directly to the residence/business is the next logical step to provide high-speed broadband services (such as high speed data, delivering voice services, and high quality video (TPS: Triple play service).

Brining fibre optics to the homes of India was one of our aim and we are proud to say that we achieved it successfully. AKSH has a number of blown fibre cables and micro cables suitable for Fibre-To-The Home (FTTH) applications for the installation into duct/micro ducts. Extending optical fibre�s reach directly to the residence/business is the next logical step to provide high-speed broadband services (such as high speed data, delivering voice services, and high quality video (TPS: Triple play service).

Brining fibre optics to the homes of India was one of our aim and we are proud to say that we achieved it successfully. AKSH has a number of blown fibre cables and micro cables suitable for Fibre-To-The Home (FTTH) applications for the installation into duct/micro ducts. Extending optical fibre�s reach directly to the residence/business is the next logical step to provide high-speed broadband services (such as high speed data, delivering voice services, and high quality video (TPS: Triple play service).

Indoor cables are flexible, non-gel filled cable for use in telecommunication stations for interconnection between the optical line system and the fiber distribution frame. It is also suitable for data networks. The sheath is made of PVC that has good tensile strength and tear resistance. The cable can be terminated with a wide variety of connectors. Simplex design is supplied with one tight buffered fiber (in single-mode and/or multi-mode) whereas Duplex Design is supplied with two tight buffered fibers, single-mode or multi-mode.

Indoor cables are flexible, non-gel filled cable for use in telecommunication stations for interconnection between the optical line system and the fiber distribution frame. It is also suitable for data networks. The sheath is made of PVC that has good tensile strength and tear resistance. The cable can be terminated with a wide variety of connectors. Simplex design is supplied with one tight buffered fiber (in single-mode and/or multi-mode) whereas Duplex Design is supplied with two tight buffered fibers, single-mode or multi-mode.

Indoor cables are flexible, non-gel filled cable for use in telecommunication stations for interconnection between the optical line system and the fiber distribution frame. It is also suitable for data networks. The sheath is made of PVC that has good tensile strength and tear resistance. The cable can be terminated with a wide variety of connectors. Simplex design is supplied with one tight buffered fiber (in single-mode and/or multi-mode) whereas Duplex Design is supplied with two tight buffered fibers, single-mode or multi-mode.

Indoor cables are flexible, non-gel filled cable for use in telecommunication stations for interconnection between the optical line system and the fiber distribution frame. It is also suitable for data networks. The sheath is made of PVC that has good tensile strength and tear resistance. The cable can be terminated with a wide variety of connectors. Simplex design is supplied with one tight buffered fiber (in single-mode and/or multi-mode) whereas Duplex Design is supplied with two tight buffered fibers, single-mode or multi-mode.

Indoor cables are flexible, non-gel filled cable for use in telecommunication stations for interconnection between the optical line system and the fiber distribution frame. It is also suitable for data networks. The sheath is made of PVC that has good tensile strength and tear resistance. The cable can be terminated with a wide variety of connectors. Simplex design is supplied with one tight buffered fiber (in single-mode and/or multi-mode) whereas Duplex Design is supplied with two tight buffered fibers, single-mode or multi-mode.

High performance Optical fibres are placed in gel-filled buffer tubes which are stranded around a dielectric central member. Water blocking tape is added to eliminate water ingress & migration. Periphere strength members are included to provide appropriate pulling tension performance. An insulated pair of copper conductor is used as one of the stranding, elements for power transmissions to energies line components.

The loose tube containing fibres and jelly is protected by strength members aramid reinforced plastic rod. The ARP rod makes cable very flexible and provides good tensile strength and crush resistance. The cable can be installed on electric poles or directly buried or blown in ducts. The light weight and flexibility makes it ideal for FTTH application.

The loose tube containing fibres and jelly is protected by dielectric rigid ceramic armour and sheathed with HDPE. This cable is non-metallic, rodent proof, moisture resistant with very high tensile and crush resistance. This cable can be used for aerial, direct burial and duct installation.

Options Available

• Nylon/LSZH/FRPE as outer Jacketing Available.
• Customized designs are available on request.
• Fibre options: SM (G652B/D, G655 & G657), MM (OM1, OM2 & OM3)
• Dry core construction (non jelly) is optional.
• Rip Cord is optional.
• Composite of various types of fibres (SM & MM).
• Metallic central strength member option available.
• High fibre count cable designs are available on request

Di-electric cable composite strength member widely known as FRP/GRP rod is designed to provide excellent strength performance while maintaining high degree of stiffness, preventing cable buckling over its entire service life.

• Light weight and excellent tensile strength
• Prevents cable buckling
• Most suited for multi-loose tube, uni-tube, slotted core and ribbon cable designs
• Used as central or peripheral reinforcement in fibre optic cable
• Dual Advantage: Reinforcement during installation as well as reduce stress on signal carrying optic fibre/conductor
• Prevent sagging in aerial installation
• Cost effective solution as a strength member

ARP rods are non-metallic composites designed primarily for use as a central strength member in fiber optic cables. ARP rods offer high tensile strength & better bending properties with minimum weight. Thus, ARP rods are ideal for cable designs for FTTH application where the cables are subjected to sharp bends.

These are also ideal for all dielectric cable configurations where placement close to power lines is common. An excellent choice for high temperature environments.

• Light weight and high strength
• Low expansion. ARP has a low coefficient of thermal expansion than steel wire and GFRP in a wider temperature range
• Impact and break resistance. ARP has much higher tensile strength (1700MPa). The remained tensile strength could be 1300MPa even it is broken
• Good flexibility. ARP is flexible and easy to bend. Its minimum bending radius is 24 times of the diameter of ARP rod
• Enables the cable to be compact, aesthetic and flexible, especially for the indoor layouts.

Teleglass WB is E-glass reinforcement coated with super absorbent resin. It eliminates flooding gels & tapes from fibre optic cables. Teleglass WB swells to form gel as it comes in contact with water and stops further flow into cable jacket. It has good abrasion resistance and easy handling properties.

Innovation is the Key strength of the company making it pioneers in "Fibre to Home" (FTTH), IPTV and VOIP services.

Presenting "iControl", the largest brand of IPTV services in India partnered with Bharat Sanchar Nigam Limited (BSNL) and Mahanagar Telephone Nigam Limited (MTNL). It has presence in India’s 20 major cities including Delhi and Mumbai.

VoIP, voice over internet protocol service provided by AKSH in association with MTNL, for MTNL subscribers to enable them to talk to more than 100 countries (including US, UK, Australia etc.) at low cost . This service ensures high voice quality domestically and internationally.

With VoIP you can speak over the internet, anywhere in the world where there is a broadband connection. The VoIP technology converts your voice into a digital signal that travels over the internet. You can:

AKSH has started Fibre to the Home (FTTH) in Delhi and Mumbai with MTNL and in Jaipur, Ajmer, Faridabad and Gurgaon with BSNL, now people can enjoy fibre at their home having bandwidth speed they wished for. They can realize the speed of Internet up to 100 Mbps, Multiple IPTV connections, VoIP based Telephone service.