UNITED TECHNOLOGIE
Featured Products
Highest quality standards are achieved through the implementations of latest technology, decades of experience and everlasting moral values , which have helped us to retain our customers as well as multiply them.
Welcome to UNITED TECHNOLOGIE
Ball Mill
Salient Features
Model : STD / GMP
MOC : S. S. 304 Q. / 316 Q.
Capacity : Depending upon product (density, nature, moisture content, weight)
Drive : 3-phase electric motor (single phase optional) coupled through pulley reduction and spur drive.
Construction : Unit is supported on MS Structure with mixing chamber having 6” to 8” dia mouth opening or as required. Steel balls or rods are not included with the unit, can be supplied at extra cost.
Optional accessories / attachments / spares
SS containers
SS Collecting tray (suitable for m/c.)
Brushing And Washing Unit
Salient Features
Model : STD / GMP as desire
Type : Two (twin) head unit / Four head unit
MOC : S. S. 304 Q. / 316 Q. (contact parts)
Unit : Supplied with SS galvanized soaking tank size 75* 50* 30 cm, 12 SS galvanized rinsing jet & twin head bottle brushing unit
Recommended Spares Nylon brush - for 10ml,50ml, 100ml& 250ml
Brush holding chuck “V” belt
Coating Pan
Salient Features
Uses : Coating & Polishing. Gives finest coating on tablets & granules
Model : STD / GMP / Tilting
MOC : S. S. 304 Q. / 316 Q. (contact parts)
Drive : 3 phase, 440V, 1440 RPM TEFC electric motor with worm reduction gear box & cone. Pulley to obtain to obtain speed of 10,20, 25, RPM (Approx)
Capacity : May vary depending upon product (material nature, moisture content, weight, size, etc.)
Construction : Elliptical coating pan mounted at an inclination of 30 to 45 horizontal or as per requirement. Entire unit housed in a steel frame painted to smooth finish. Fixed angle mounting. No foundation required.
Optional accessories / attachments S. S. Baffles inside the Pan SS Lid
Hot air blower - 440 V, 2880 RPM TEFC motor & centrifugal blower with damper delivering 100/200 CFM (+20%).
Finned heater capacity 1kw / 2kw / 230 V to give air at 30 to 90 thermostat & pipe
Explosion / flame proof / hose proof motor
SS Fishtail for hot air distribution
Control Panel -
Conveyor Belt
Salient Features
Types: Conveyor belt / Screw Conveyor / Turn table / Inspection belt
Model : STD / GMP
MOC : S. S. 304 Q. / 316 Q.
Drive
: 3 phase, 440V, 1440 RPM TEFC electric motor coupled with reduction gear box & sprocket drum etc.
with req. speed
Construction
: Fabricated angle / square / round pipe having top with suitable working space (12”) on either side
with 9” PVC coated belt
Optional accessories / attachments
Dual adjustable speed motor
Starter / control panel
Collecting Trays
Stools/ Chairs
Distillation Extraction
Unit construction may vary as per the product and required process, capacities and additional requirements / specifications of clients
Clients are requested to provide us with schematic drawing of the procedure required. Consultants are available for the same.
ptional accessories / attachments
Heating system
Heating media – gas, stove, electric heaters, etc
Capacity
05 – 50 liters (vessel capacity) or as per de
Drum Mixer
Salient Features
Uses : mixing / blending dry powder, granules
Model : STD / GMP
MOC : S. S. 304 Q. / 316 Q. (contact parts)
Construction
: Drum is mounted on a rotating cage and due to the circumferential speed of inclination, superior
mixing is obtained
Features
: Airtight lid with quick closing / opening clamps. Drum can be detached from the Machine for the
cleaning or for easy portability.
Capacity
: May vary depending upon product (material density, nature, moisture content)
Optional accessories / attachments
- Mounting on end plates
- Channel base
Recommended Spares
- Sandwitch fiber wheel / castor wheels
- Belt with clamp
- Neoprene gasket with Lid
- Extra SS Drum (or of different capacity)
Tray Dryers Or Ovens
Salient Features
Uses
: Drying granules, pills, leaves, etc.
Model
: STD / GMP
MOC
: S. S. 304 Q. / 316 Q. (contact parts)
Construction
: Fabricated in double walled MS / SS Sheet construction mounted on rigid steel frame-work with
insulation & best quality ‘u’ type heaters. For STD model the entire unit is painted with synthetic
enamels with suitable pre-coats. The inside is painted with heat resistance paints to resist
temperatures up to 100 –120 degree Celsius max. GMP Models are totally cladded with SS sheets
form outside.
Blower
: A suitable motor driven blower circulates the Hot air through the totally enclosed type strip heaters
and is circulated in the drier by means of a Fan, fitted on the oven. Moist air can be exhausted by
the means of dampers provided.
Control Panel
: Compromising Thermostat (temperature controller), Lamp Indicators, Push button- on/off switch
(starter), conductor duly interconnected suitably.
Features
: Air-inlet, Air filter, Adjustable air outlet, Self-locking insulated door.
Optional accessories / attachments
Electric Heaters – 1KW / 2 KW
Trolley arrangement for easy portability
Trolley for Trays (with and without product) storage
Earthing Bolt on Control box
Recommended Spares
SS Trays (16” x 32” x 1.25” -16/18/20 swg or as per desire)
Aluminum Trays (16” x 32” x 1.25” -16/18/20 swg or as per desire)
Perforated Trays (SS / Aluminum)
Oscillating Granulator
Salient Features
Uses
: making Granules for compressing operation. Suitable for dry, wet and even semi wet granulation.
Model
: STD / GMP
MOC
: S. S. 304 Q. / 316 Q. (contact parts)
Construction
: Compact unit driven by motor through a gear box.
Screen
: Changeable type by means of quick opening and locking arrangement. One screen provided along
with the machine
Features
: Unique oscillatory rotor action ensures high outputs and a predictable product with minimum of
fines. Adjustment, cleaning & operation are simple sturdy, durable, better productivity.
Recommended Spares
SS Trays
Aluminum Trays
SS Screens – available from 0.5 mm to 20 mm / Sandwitch type / With or without support
V-belt
Homoginizer
Salient Features
Uses
: For making suspensions & emulsions. For mixing Higher viscosity liquids - Textile Auxiliary,
Adhesives, Ceramics, Detergents, Varnishes, Beverage Blenders, Paints, Pesticides, etc.
Model
: S. S. 304 Q. / 316 Q. (contact parts)
Mos
: STD / GMP as desire
Capacity
: May vary depending upon product (liquid) viscosity
Features
: Homogenizing head consists of stator and rotor arrangement. The stator is supported on the motor
by means of the stainless steel supporting roads.
Optional accessories / attachments
SS / MS Self supported Stand with height adjustment arrangement
Wire rope arrangement
Recommended Spares
Hylam Bush
S. S. Rotor
Jacketed Vessel
Optional accessories / attachments
Tilting Arrangement (for easy discharge)
Dished end / Conical bottom
SS lid
Outlet valve with hose nipple
Castor wheels
Trolley for easy portability
Can be supplied with Agitator, Anchor stirrer, Homoginizer, Disperser
Capacity
50 – 1000 liters or as per desire
Powder And Mass Mixer
Salient Features
Uses
: mixing of dry or damp material
Model
: STD / GMP
MOC
: S. S. 304 Q. / 316 Q. (contact parts)
Capacity
: May vary depending upon product (material density, nature, moisture content, weight & screen
mesh size)
Construction
: Mixing Chambers or the Drum having sealed ends from both sides prevent outside lubricant from
entering into the body. The drum rests on rigid MS / SS body carrying Motor, Gear box, Starter,
Limit switch, Locking and Titling arrangement. The titling arrangement proves easy for loading and
unloading of the material where as the lock switch system automatically stop the machine as soon
as the top lid cover is opened, avoiding accidents as the machine won’t start until and unless the
mixing chambers is closed completely, Giving assurance of absolutely safe handling of the machine.
Recommended Spares
Teflon Seals
Bearing
Worm Wheel (hand tilting)
Flexible coupling set
Limit switch
Mechanical Sifter
Salient Features
Model
: STD / GMP
MOC
: S. S. 304 Q. / 316 Q. (contact parts)
Screen
: Changeable type by means of quick opening and locking arrangement. One screen provided along
with the machine
Capacity
: May vary depending upon product (material density, nature, moisture content, weight & screen
mesh size)
Construction
: Portable & Compact. Easy dismantling & cleaning facility of contact parts. Lower energy
consumption compared to reciprocating vibratory system
Uses
: Sieving powder / granules, etc.
Optional accessories / attachments
Brushing arrangement
SS Lid with charging port
Aluminum ring & SS tie rods for fixing screen finer than 100#
Explosion / flame proof / hose proof motor
Size
Drive (3-phase)
Capacity/Hr (approx.)
Energy consumption
Charging Height
Discharging height
Net weight (machine)
Machine Dimension (approx.)
10”
0.5 hp
Upto 25 Kgs
0.37 kw
600 mm
550 mm
100 kgs
415 x 415 x 650
14”
1 hp
Upto 50 Kgs
0.75 kw
750 mm
650 mm
125 kgs
500 x 500 x 1000
20”
1.5 hp
Upto 100 Kgs
1.2 kw
1080 mm
770 mm
390 kgs
1000 x 1000 x 1100
30”
2 hp
Upto 300 Kgs
1.5 kw
1100 mm
770 mm
430 kgs
1100 x 1100 x 1200
40”
3 hp
Upto 500 Kgs
2.25 kw
1200 mm
900 mm
500 kgs
1200 x 1200 x 1200
Multi Mill
Salient Features
Uses
:
Model
: STD / GMP
MOC
: S. S. 304 Q. / 316 Q. (contact parts)
Screen
: Changeable type by means of quick opening and locking arrangement. One screen provided along with
the machine
Capacity
: Depending upon product (material density, nature, moisture content, weight & screen mesh size)
Optional accessories / attachments
Modified Straight Discharge Hopper (for maximum output rate of flow)
Dusting arrangement for pulverizing of fine powder to avoid dusting in the air provided on Discharge Hopper with Perforated Bucket & Cloth
S. S. Jacket on Intermediate Hopper with inlet, outlet & vent connections
Recommended Spares
S. S. Screen - 0.5 mm to 20 mm
Special screens are available in # (mesh) in sandwich type
Rubber gasket- charging & discharging hopper
Teflon-ring / gasket
SS Blades set - cutting / scraper / swing / pins / beater boss / beater cap
SS Blade – Hexsaw type cutter to increase the fines of the powdero SS Beater / SS Shaft
Ointment Filling Machine
Salient Features
Uses
: Filling ointments, creams, paste of wide ranging viscosity & specific gravity, in all type of container.
Used in pharmaceuticals, chemicals, cosmetics distillery, food industries, etc very efficiently either as
an isolated unit or even as an attachment to the packaging and related machinery.
Products
: Flavors, preservatives, purees, shampoo, shrikhand, gels, creams, ointment, paste, ghee, grease,
paints, semi solids, etc.
Model
: STD / GMP as desire
Drive
: 3-phase / 1440 rpm motor coupled with suitable reduction gearbox with crank mechanism
Type
: Manual / Motorized
MOC
: S. S. 304 Q. / 316 Q. (contact parts)
Capacity
: May vary depending upon product (liquid) viscosity
Hopper
: Hopper capacity varies as per the filling capacity or unit range
Features
: Piston type filling having fine ability for accurate filling
Accuracy
: Accuracy of fill with in + 2% of volume. depending upon product viscosity. Product filters without
splash, spillage and foaming.
Optional accessories / attachments
SS Trays
Bottle centering devise for faster production
Product inlet filters with finely perforated S. S. Screen
Graduated volume adjustment arrangement
Control box
Recommended Spares
Piston Ring
Filling SS Nozzle
L.H. & R.H. Levers
‘V’ belt
Pills Making Machine
For accurate pills (size, weight, etc,) we suggest the following two machines
STAGE A
Stick making is the first step in preparation of pills of various shapes & sizes.
At a time one or more than one sticks can be prepared depending upon the size & density required for machine
STAGE B
Through this stage the stick prepared gets cut between the rollers of the machine.
The rollers can be set according to suit the requirements, i.e. of various dimensions either round or oval.
Optional accessories / attachments
SS Trays
Planetary Mixer
Salient Features
Uses
: Intimate, homogeneous & through mixing of all kinds of ointments, paste, creams, lotions,
toothpaste, granules, chocolates, mehendi, kajal, semi-solids and mix usages
Model
: STD / GMP / Sliding type / Screw type
MOC
: S. S. 304 Q. / 316 Q. (contact parts)
Drive
: 3 phase, 440V, 1440 RPM TEFC electric motor with worm reduction gear box & cone. Pulley to
obtain to obtain speed of 10,20, 25, RPM (Approx)
Construction
: Machine portable and compact in design requires no foundation. The mixer is specially engineered
to meet the needs of operations of different volumes or capacities
Beater
: Heart shape, anchor type or various other type, designs & shapes of mixing beaters as per
different materials for specific process are available
Portability
: Mixing bowl can be retracted and made portable to facilitate comfortable transportation (of mixed
products), washing, cleaning etc.
Optional accessories / attachments
Tilting / sliding arrangement for bowl
Inlet / outlet values in the bowl
Jacketed bowls / vessels for heating or cooling of products during mixing to produce lustrous product.
Under vacuum bowls / vessels
Explosion / flame proof / hose proof motor
Control Panel - Electrical control panel with back up fuses & indicator lamps for easy process control-optional.
Scraper blade
Stirrer / Homoginizer (as per specifications)
Temperature / pressure gauge, side glass, etc.
Pulverizer
Salient Features
Model
: MS / STD / GMP
MOC
: MS / SS 304 Q. / 316 Q. (contact parts)
Drive
: 3 phase, 440V, 1440 RPM TEFC electric motor to obtain req. rpm
Uses
: Suitable for making fine powder – Spices, Dry roots, Dry fish, Cattle, Poultry feeds, etc.
Construction
: Motor having swinging & fixed beaters are fitted in a Grinding chambers provided with a teeth liner
on the top half & sieve fitted to the bottom half. Feeding Hopper, Grinding Chamber and drive
mechanism is mounted on a suitable stand.
Output
: Output capacity depends upon material nature & properties – size, density, moisture content
Recommended spares
SS Screens
Blades
Blades
Shaft
Teeth cutter line
Our Vision
* To embrace new technologies and methods. * To give unsurpassed products and services to the clients. * To constantly look for improvement and changes.
