BOD Incubator (Bio-Oxygen Demand) are used to maintain temperature for test tissue culture growth, storage of bacterial cultures and incubation where high degree of constant temperature accuracy is required. Thermolab BOD Incubators provide with accurate conditions and uniformity throughout the chamber.

Standard Features

Double walled modular structure with 3” thick PUF insulation
Inside Stainless Steel and Outside Mild Steel Powder Coated OR Stainless Steel
Interior illumination
Inside full length observation glass door with secure gasket
Heavy-duty door hinges and latches to maintain a secure and uniform seal
Racks & trays – Stainless Steel with adjustable height
65 mm Port Hole with rubber seal to insert sensors for validation purpose
U shaped S.S. Nichrome wire air heaters
Compressor with CFC Free R 134 A / R 404 (Eco Friendly) refrigerant having state of art by-pass system for continuous run of compressor
Plc control system with touch screen display coloured screen – 5.7” HMI with Ethernet
Safety controller sensor to cut off the supply in case of overshoot and undershoot of temperature giving audio visual alarm
Web based online monitoring
Complete with IQ, OQ, PQ, Documents, Operations and Maintenance manuals
Works on 23V AC single phase 50Hz

Optional Features

21 CFR Part 11 compliance window based communication software for data management
PLC for auto changeover of standby refrigeration system
Stand by refrigeration system (Except for 90 Ltrs.)
Scanner 8 point temperature complete with sensors and printer interface and data storage facility Door Access Security system
Mobile Alert system
80 Col. Dot Matrix printers along with Stainless Steel stand

Specifications

Standard Model(S) : Inside S.S. 304 with mirror polish & outside mild steel powder coated
GMP Model(G) : Inside S.S. 316 with mirror polish & outside with S.S. 304 matt buff
Temperature Range : 5 °C to 60 °C
Temperature Accuracy : ± 0.2 °C
Temp Uniformity : ± 2.0 °C

Walk-In BOD Incubator (Bio-Oxygen Demand) are used to maintain temperature for test tissue culture growth, storage of bacterial cultures and incubation where high degree of constant temperature accuracy is required. Thermolab BOD Incubators provide with accurate conditions and uniformity throughout the chamber.

Standard Features

Pre-fabricated doubled walled modular panels with PUF insulation
Inside Stainless Steel and Outside Mild Steel Powder Coated OR Stainless Steel
Floor panels having extra reinforcement to sustain the movement and sample load inside the chamber
Interior illumination for working area
Multi pane vacuum sealed observation glass window
Heavy-duty door hinges and latches to maintain a secure and uniform seal
Racks & trays – Stainless Steel with adjustable height
65 mm Port Hole with rubber seal to insert sensors for validation purpose
Interior illumination for working area
U shaped S.S. Nichrome wire air heaters
Auto change over to stand by cooling system in case of failure of regular cooling system or vice versa
Compressor with CFC Free R 134 A / R 404 (Eco Friendly) refrigerant having state of art by-pass system for continuous run of compressor
Plc control system with touch screen display coloured screen – 5.7” HMI with Ethernet
Web based online monitoring
Complete with IQ, OQ, PQ, Documents, Operations and Maintenance manuals
Works on 23V AC single phase 50Hz

Hydronic refrigeration system by chilled water circulation

Compressor is in off mode more than 50% of the time, saving electrical consumption, heat dissipation in the room and increasing the life of the compressor
Saves 50% of the electrical consumption
System is compact and avoids piping on site as it is factory fitted ready to install, which reduces installation time
Weather proof unit (which can be placed indoors as well as outdoors)
Recovery of cost within 2 years

Smart air distribution system

A separate supply and return duct for ensuring uniformity of set conditions

Safety & Alarms

Safety controller sensor to cut off the supply in case of overshoot and undershoot of temperature giving audio visual alarm
Door Opening alarms
Emergency bell switch provided inside the chamber
Special door lock provided to open the door from inside
All the alarms are events are logged in the software

Optional Features

21 CFR Part 11 compliance window based communication software for data management
Stand by refrigeration system
Scanner 8 point temperature complete with sensors and printer interface and data storage facility Door Access Security system
Mobile Alert system
80 Col. Dot Matrix printers along with Stainless Steel stand

Specifications

Standard Model(S) : Inside S.S. 304 with mirror polish & outside mild steel powder coated
GMP Model(G) : Inside S.S. 316 with mirror polish & outside with S.S. 304 matt buff
Temperature Range : 5°C to 60°C
Temperature Accuracy : ± 0.2°C
Temp Uniformity : ± 2.0°C

Standard Features

Double walled modular structure with 3” thick PUF insulation
Inside Stainless Steel and Outside Mild Steel Powder Coated OR Stainless Steel
Interior illumination
Inside full length observation glass door with secure gasket
Heavy-duty door hinges and latches to maintain a secure and uniform seal
Racks & trays – Stainless Steel with adjustable height
65 mm Port Hole with rubber seal to insert sensors for validation purpose
U shaped S.S. Nichrome wire air heaters
Compressor with CFC Free R 134 A / R 404 (Eco Friendly) refrigerant having state of art by-pass system for continuous run of compressor
Plc control system with touch screen display coloured screen – 5.7” HMI with Ethernet
Safety controller sensor to cut off the supply in case of overshoot and undershoot of temperature giving audio visual alarm
Web based online monitoring
Complete with IQ, OQ, PQ, Documents, Operations and Maintenance manuals
Works on 23V AC single phase 50Hz

Optional Features

Also available in advanced microprocessor based PID controller
21 CFR Part 11 compliance Window based communication software for data management
PLC for auto changeover of standby refrigeration system
Stand by refrigeration system (Except for 90 Ltrs.)
Scanner 4 point temperature complete with sensors and printer interface and data storage facility Door Access Security system
Mobile Alert system
80 Col. Dot Matrix printers along with Stainless Steel stand

Specifications

Standard Model(S) : Inside S.S. 304 with mirror polish & outside mild steel powder coated
GMP Model(G) : Inside S.S. 316 with mirror polish & outside with S.S. 304 matt buff
Temperature Range : 10°C above ambient to 60°C
Temperature Accuracy : ± 0.2°C
Temp Uniformity : ± 2.0°C

Thermolab’s Oven provides heated conditions for curing, drying and exposures for high temperature testing with high accuracy and superior quality.

Standard Features

Inside Stainless Steel and Outside Mild Steel Powder Coated OR Stainless Steel
3’” Thick Ceramic wool Insulation
Motor and blower arrangement to have uniformity of condition under chamber loaded condition
U shape S.S. Nichrome wire air heater
Microprocessor based PID controller (Auto Tuning Type) with digital display
Safety alarm system (Jumo German Thermostat) to cut off the supply in case of overshoot
2 Nos. Stainless Steel welded rod trays. With adjustable tray height arrangement Adjustable Ventilator, Silicon rubber gasket (for Oven) and Viton Gasket (for Hot Air Oven)
Works on 230 V AC single phase 50 Hz
Printer interface facility to print data directly with variable print time interval and PC communication with software
Complete with Operating manual and IQ, OQ and PQ documents

Optional Features

Electronic Timer of 999 hours with digital display will be provided to cut off the supply after the set time is over giving audio alarm
Printer Interface facility to record on 80 Col. dot matrix printer set values, actual values date and time with variable print time interval. (To be ordered with PID Controller)
PC Interface communication card with RS 485 for above control system. (Hardware for each oven). (To be ordered with PID Controller & Printer Interface)
CFR 21 Part 11 compliance Window based communication software for data management. Complete with RS 485 multi dropping to monitor multiple equipments on one software
80 Col. Dot Matrix Printer along with Stainless Steel stand

Specifications

Standard Model : Inside S.S. 304 mirror polished & Outside powder coated M.S.
G.M.P Model : Inside S.S. 304 mirror polished & Outside S. S. 304 dull smooth buff
Temperature range : 50 oC to 200 oC and 50 oC to 300 oC
Temperature Accuracy : ± 0.5 oC
Temperature uniformity : Upto 150 oC = ± 5.00 oC

150 oC to 200 oC / 300 oC = ±10 oC

Heating of volatile liquid having low flash points, degassing of solutions, drying of product mass under vacuum to cut down the drying time.

Standard Features

Inside Stainless Steel and Outside Mild Steel Powder Coated OR Stainless Steel
3” Thick Glass wool Insulation
Toughened glass temperature resistant observation glass window
Vacuum Gauge, Vacuum Release Valve and Vacuum Nozzle
Nichrome wire band heaters wound round the inner body
Safety Thermostat to cut off the supply in case of overshoot
Internal Mirror Polish, External Powder Coated (from both surface) OR Stainless Steel with dull smooth buffing
MCB, Silicon Rubber Gasket and 3 Pin Plug with Cord
Works on 230 V AC single phase 50 Hz
Complete with Microprocessor based PID controller (Auto Tuning Type) with digital display of temperature in degree
Complete with Operating manual and IQ, OQ and PQ documents

Click on image to zoom

Optional Features

Printer Interface facility to record on 80 Col. dot matrix printer set values, actual values date and time with variable print time interval. (To be ordered with PID Controller)
PC Interface communication card with RS 485 for above control system. (Hardware for each Vacuum Oven). (To be ordered with PID Controller & Printer Interface)
CFR 21 Part 11 compliance Window based communication software for data management. Complete with RS 485 multi dropping to monitor multiple vacuum equipments on one software
80 Col. Dot Matrix Printer along with Stainless Steel Stand

Specification

Standard Model Inside S.S. 304 with mirror polished & outside powder coated M.S.
G.M.P. Model Inside S.S. 304 mirror polished &
Outside S.S. 304 dull smooth buff.
Temperature Range : upto 200 oC
Temperature Accuracy : ± 0.5 oC
Temperature Uniformity : ± 50 oC on tray
Vacuum: up to 710 mm HG

Description / Specification of Deep Freezer

We are involved in offering a wide range of Deep Freezer to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Deep Freezer. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Thermolab Autoclaves are suitable for a wide range of applications wherein fast and assured sterilization is required. Ideal for Pharma QC, QA, Micro, R&D, Chemical Plants, Bio-Labs, Water & Air Pollution Labs, Food, Beverage & Distilleries.

Standard Features

GMP model with fully automatic operations
Double wall design has single chamber for steam and water
Inner stainless steel & Outer Chamber is made of stainless steel
Hydraulic die pressed stainless steel Lid and flanges are made of stainless steel
In built adjusted digital timer, programmable as per sterilization load
Automatic exhaust of steam at the end of cycle
Low water cut off system
PT100, RTD type Class ‘A’
Microprocessor based digital display
Works at 230V / 15A / 50 Hz
Complete with IQ, OQ, PQ documents
Factory calibrated with traceable certificate of ERTL

[Auto Clave]

Click on image to zoom

Optional Features

Simultaneous display with online Printing of 3 temperature and 1 pressure channel along with dot matrix printer (For TA – 75 S/G , TA – 113 S/G, TA 180 S/G)
Basket – S.S. wire mesh

Specifications

Temperature range : 121 oC
Temperature resolution : 0.1 oC
Temperature accuracy : + 0.5 oC
Pressure range : 15 to 22 PSI, factory set at 15 PSI
Pressure resolution : 1 PSI

HyZone Class II Microbiological Safety Cabinets from Thermolab blend knowledge, experience and innovative design changes in creating state-of-the-art equipment as part of its offerings. HyZone is a Class II Microbiological Cabinet, designed and built to meet, if not exceed, performance requirements of the EN 12469:2000 Standard.

Salient Features

Independent blowers for Supply and Exhaust air
Double HEPA filtration of Exhaust air
Negative pressure envelope (shroud) for HEPA filter Plenums and
Return air path to prevent escape of Contaminated air to atmosphere and work area
Simultaneous real time monitoring and display of Supply and Exhaust air velocities
Monitoring of work area temperature
Sliding front sash with counter weights for easy operation
Microprocessor controlled operations with Normal, Fast Start and
Service modes and alarms
Ergonomic design like angled front sash, arm rest etc., for operator comfort
RS 232 connectivity
EN 12469:2000 compliant

Audio Visual Alarms Are Provided For:

Out of range or incorrect laminar airflow velocity and
frontal air barrier velocity
Incorrect position of front sash-window
Clogging of HEPA filters
Out of range temperature

[Microbiological Safety Cabinet (Class II)]

Click on image to zoom

Applications Areas

Microbiology
Medical Devices
Virology
Pharmaceuticals
Haematology
Pathology
Cell culture
Blood Bank
Eye Bank
Stem Cells Research
Biotechnology
Genetics

Designed with high precision to Streams of Class 100 air sweeps through the work area to make it ultra clean and sterile. Deliver high level of product protection. Ergonomic design reduces user fatigue and improves process accuracy to meet your research application. Manufactured in line with the international quality standards.

Technical Data

Material of contraction – Main Body: Powder coated finished, work Table: S.S. 304
Side wall: UV absorbing toughen glass
HEPA Filter: Efficiency of >99.997% at 0.3 micron, H14 as per EN 1822
Pre – Filter: to block coarse particles in the range of 10-15*M
Vertical Downflow: 0.3 to 0.45 mn/sec (60 to 90 f pm)
Lighting: Fluorescent light
Pressure Gauge: Tube manometer or magnehelic gauge
Germicidal Lamp: Ultra-Violet lamp, Interlocked and programmed to work only when blowers and fluorescent lamps are off and front window is fully closed
Front Door: Angled front sash with counter weights
Motor-Blower: AC centrifugal Fan backward curve, High Efficiency inlet design, Vibration free operation, Precision balanced for superior performance, Impeller completely made up of aluminium sheet, Lubricated maintenance free ball bearings
Control System: Microprocessor controlled operations. Real time monitoring of downflow velocity. Dis play of front sash position, Timers for UV light, Experiments & Stop watch. Selectable units for temperature & air flow. RS 232 for data logging. Expected life of filter & UV lamp