• Manufactured from FDA approved SILICONE RUBBER in Clean Room Environment.
• Non toxic, Non Leaching & Pyrogenfree.
• Withstand repeated Sterilization.
• Compatible with common drug formulation.
• Biological Neutra
• Resist Oxidation, Ozone & radiation.
• Does not support bacterial growth.
• Non-reactive to body tissue and fluid.
• Non-adherence tissue.
• Retains Physical properties in extreme.
• Appearance Transparent.
• Hardness :- 60 Shore A .
• Density :-  1.2  
• Temperature :-  – 60º to 200º C. (-110º to 480º F) 
• Elongation at break 500%
• Tensile Strength :- 11.0Mpa
• Range :- 0.2mm ID to 54mm ID

Transfer of Sterile Liquids.
Blood Transfusion.
I.V. Administration.
Percutaneous flow guided cardiac catheterization.
Prolonged dialysis & drainage of the peritoneal cavity.
Suction Drainage.
As gasket for autoclave & ovens.
With food & dairy equipments.
Animal husbandry Infertility Clinic for Embryo transfer.
As insulator in electronic & Electric equipments.
Bio Technology, Agricultural & Research Laboratories.

• Manufactured from FDA approved SILICONE RUBBER in Clean RoomEnvironment
• Non toxic, Non Leaching & Pyrogenfree.
• Withstand repeated Sterilization.
• Compatible with common drug formulation
• Biological Neutral
• Resist Oxidation, Ozone & radiation.
• Does not support bacterial growth.
• Non-reactive to body tissue and fluid.
• Non-adherence tissue.
• Retains Physical properties in extreme

Bulb Seals and bulb gaskets are used between the door and the wall on the hinge side or on the strike side.
Attach rigid side to glass.
Soft bubble provides a watertight seal.
To attach use crystal clear two-way tape for a positive, long lasting bond.
For more  use and application, please contact us with your details.
We will help you to explore more ways to utilize our products for your special purpose.
 

In house mixing and machining process helps us maintain quality standard and speed up manufacturing and delivery process.
Our optimum pricing module makes us industry leader in bulb seal manufacturing.
We offer you quality support and help to decide which bulb seal, gasket, door seal or weatherstripping is good for your unique applications.

• High Heat Resistance.

• Resistance to high temperature.

• Temp :-   – 60º C to 200º C. (-110ºF to 480º F).

• No harmful  toxic or physiological effects.

• Chemically extremely stable and for use with many acids & alkalis.

• Resistance to Ozone, Oxidation, UV. Corona discharge, cosmic radiation.

• Electrically insulating with dielectric strength 500 V/mil.

• Low flammability and low smoke.

• High burning point and burn smoke

• Range :-  Available in single core, double core on copper conductor.

“SEVITSIL” products are specialized in manufacturing complete range of silicon Coated Insulation Cables which are capable of enduring temperature extreme.

• Lighting Equipment.
• Home Appliances.
• Transformer & other electrical Equipment.

Manufacture from Food Grade Silicone Rubber 100% safe for use.
High Temperature: –60ºC to +200ºC.(-110ºF to 480ºF).
Hardness :- 55 ± 5 Shore A.
Well looked appearance.
Won’t scratch nonstick cookware.
Keep your preserving container from air, perfect sealing effect.

SEVITSIL manufacture silicone strip with Two hole, Single hole to fit your container lead & make air & liquid tight.
Silicone strip available in continuous roll of 50, 100, 200 meters in any colour.
Silicone strip is made from FDA approved silicone rubber.
These products are widely used by Plastic industries for providing the proper prevention from leakage.

LED Lights
Lock n lock air tight boxes.

Non Toxic.
Resilient & easily replaceable.
Suitable for continuous operational at 220º C and specially designed strips & profiles are also available for higher working temperature.
Low flammability & low smoke in the event of fire.
Available in various size & color as per customers requirement.

High temperature sealing applications ; can be joined to ‘ O ‘ rings.
Food and medical equipment, machinery.
Pouch Packing Machine.
Sealing Machine.
Shrink Wrapping machine.

• Simple in design, our range of sterilizer gaskets are specially designed to perform high temperature.
• These gaskets are mostly used for sealing door of various equipments.
• Made of silicon, our sterilizer gaskets ensures effectiveness at high temperature and are highly resistant to wear.

• Low water absorption.
• High compressibility and low compression set over a wide temperature range.
• Suitable for long  term continuous operation from -60º C to 200º C.

• Thermal Insulation.
• High & Low temperature acoustic insulation.
• High & Low temperature gasket & seal

• Suitable for continuous  Operation.

• Temp :   – 80º C to 250º C. (-110ºF to 480º F).

• No harmful  toxic or physiological effects.

• Chemical resistant with most acids and alkali’s.

• Ozone, UV & Corona discharge  Resistance.

• Electrically insulating with dielectric strength 500 V/mil.

• Low flammability and low smoke.

• High burning point.

• Range :  In any colors From 1mm to any size as per customer requirement.

SIZES READY AVAILABLE

 1.  6 MM X 6 MM
 2.  8 MM X 8 MM
 3.  10 MM X 10 MM
 4.  12 MM X 12 MM
 5.  14 MM X 14 MM
 6.  15 MM X 15 MM
 7.  16 MM X 16 MM
 8.  18 MM X 18 MM
 9.  19 MM X 19 MM
10.  20 MM X 20 MM
11.  25 MM X 25 MM

High temperature sealing applications; can be joined to ‘O’ rings.
Food and medical equipment, machinery.
Pharmaceutical Machinery, Packaging Machinery.

• Suitable for continuous Operation.

• Temp :-  – 60º C to 200º C. (-110ºF to 480º F).

• No harmful toxic or physiological effects.

• Chemically extremely stable and for use with many acids & alkalis.

• Ozone, UV & Corona discharge  Resistance.

• Electrically insulating with dielectric strength 500 V/mil.

• Low flammability and low smoke.

• Range :-  In any colors From 1mm to any size as per customer requirement.

• “SEVITSIL” offers wide range of Solid gaskets in different colours, shapes, sizes & hardness.
• We manufacture all theses gaskets by advance technology curing system which ensure uniformity, dimension parameters & surface finishing.

•  

• SIZES READY AVAILABLE

• 1.50 MM	6.50 MM
  1.50 MM	7.00 MM
  2.00 MM	8.00 MM
  2.50 MM	9.00 MM
  3.00 MM	10.00 MM
  3.50 MM	12.00 MM
  4.00 MM	12.70 MM
  4.50 MM	15.00 MM
  5.00 MM	16.00 MM
  5.50 MM	20.00 MM
  6.00 MM	25.00 MM

   

• High temperature sealing applications; can be joined to ‘ O ‘ rings.
• Food and medical equipment, machinery.
• Pharmaceutical Machinery, Packaging Machinery.
•  

• Long life.
• flexible & Resilient for case of Insulation on to treatment roll.
• Good Electrically Insulation.
• Easy to replace.
• Do not break or crack under unusual web tension.
• Due to sleeve treat can be operated with much smaller air gap.
• Require much lower web tension.
• Ozone and corona discharge resistant.
• With high dielectric strength 250-500 Volts/mm

• Appearance Transculent.
• Hardness :- 60-70 Shore A.
• Density :- 1.2
• Temperature :- – 60º to 200º C. (-110º to 480º F)
• Elongation at break 500%
• Tensile Strength :- 11.0Mpa
• Tear Strength :- 24kgf/cm

• Standard Size

• Roller sleeves, transfer of light abrasives.
• Commonly used with ‘ Corona Treaters ‘ within the polythene and printing industry.

• Manufactured from FDA approved SILICONE RUBBER in Clean Room Environment.
• Non toxic or physiological effects.
• Chemically extremely stable and for use with many acids & alkalis.
• Ozone, UV & Corona discharge  Resistance.
• Dose not Support bacterial growth.
• Non-reactive to body tissue and fluid.
• Non-adherence tissue.
• Sterilized by steam, dry heat, ethylene oxide & gamma radiation.
•  

• Appearance Natural Transculent.
• Hardness :- 70 Shore A .
• Temperature :-  – 60º C to +200º C. (-110ºF to 480º F).
• Range :- 6mm ID to 60mm ID

• Size Available

• Coolant Hose for Industrial Machinery & Equipment.
• Pipes & connecting hose for Food & Beverages processing.
• Medical Equipment.
• Chemical & Adhesive filling systems.

• Optimal Thermal Properties.
• Fine Fabric surface finish.
• Low water absorption.
• High compressibility and low compression set over a wide temperature range.
• Suitable for long term continuous operation from  –60º C to +200 C.
• Thickness range : 5mm to 50 mm.
• Colors :- Red as standard; Grey, Black, White and special color matches possible.

• High precision is ensured inproducing extruded sections and profiles as per tolerance control requirements depending upon application.
• Also ensured are Dimensional stability, shore hardness, colour matching, etc.
• Selection is made from a wide range of compounds.
• Different grades are available e.g. Food Grade, flame retardant, high temperature steam resistant; etc.