Application Process
Add 50-75 gm / litres in water (1kg STARTM 100 in 15-20 litres water), stir to dissolve. Wipe SS surface with cotton/ pressurised spray for 3-5 minutes or soak small parts for 10 minutes. Apply liquid STARTM 100 degreaser on to the surface for 5-10 minutes (depending upon components). Then rinse the surface thoroughly with water and allow it to dry.

Application Process
 

•
Remove dirt and oil using STARTM 100 degreaser. Add 50-75 gm/litres in water (1kg STARTM 100 in 15-20 litres water), stir and dissolve. Apply liquid STARTM 100 Degreaser onto the surface for 5-10 minutes. Then rinse the surface thoroughly with water. 
(Step 1 & 5 can be avoided for STARTM GelTM on weld seam application)
•
Apply STARTM Gel TM on the weld seams and surrounding areas with a nylon plastic brush.
•
Leave the STARTM  GelTM on the weld seams areas for 20-45 minutes depending upon the thickness of oxide scale.
•
Use pressurised water Jet Spray or wipe the weld seam lightly with plastic scrubber & rinse the surface thoroughly with water.
•
Apply STARTM Passivation (STARTM Pass 1) on the surface area and leave it for about 15 minutes. This will prevent from further contamination and corrosion.
•
Rinse the surface area thoroughly with water and allow it to dry.
   

•
STAR™ 100 is a sulphur-free degreaser for removing mid rust, dirt, oil, grease, buffing compounds etc. Add 50-75 gm/litres in water (1kg STAR™ 100 in 15-20 litres water). Stir it to dissolve. Wipe SS Surface with cotton cloth or pressurised spray for 5-10 minutes. Then rinse the surface thoroughly with water.
•
STAR™ Spray must be sprayed on the SS surface using spray pump or a pressurised plastic spray bottle.
•
After spraying, leave it for about 30-60 minutes.
•
Apply STAR™ Passivation on the surface area and leave it for about 15 minutes that will prevent from further contamination and corrosion.
•
Rinse the surface area with high-pressure water system.

Application Process
 

•
Remove dirt and oil using STAR™ 100 degreaser. Add 50-75 gm/litres in water (1kg STAR™ 100 in 15-20 litres water), stir and dissolve. Apply liquid STAR™ 100 Degreaser onto the surface for 5-10 minutes. Then rinse the surface area thoroughly with water.
•
Just dip the objects (SS components) in the STAR™ Dip tank. Use plastic tank in the process time only.
•
Leave them for 5-20 minutes, depending on SS type and internal condition of SS parts & thickness of the scale. Then rinse the surface thoroughly with water.
•
Apply STAR™ Passivation (STAR™ Pass 1) on the surface & leave it for 15 minutes. This will prevent from further contamination and corrosion.
•
Remove and rinse the objects thoroughly with high pressure water.

Description / Specification of Pickling Passivation Liquid Form Star 400 Series

We are involved in offering a wide range of Pickling Passivation Liquid Form Star 400 Series to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Pickling Passivation Liquid Form Star 400 Series. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Anti Spatter Nozzle Gel For Mig And Co2 Welding Star Star Nozzle Gel

We are involved in offering a wide range of Anti Spatter Nozzle Gel For Mig And Co2 Welding Star Star Nozzle Gel to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Anti Spatter Nozzle Gel For Mig And Co2 Welding Star Star Nozzle Gel. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Innovating the Art of Welding with Spatter Remover 511

Spatter Remover 511 is an innovative product that has transformed the welding methods. This innovative product is silicone free, non-flammable, non-toxic, and non-polluting – Welding Anti Spatter and flux in emulsion form.

Benefits of Spatter Remover 511

Spatter Remover 511 is applied before starting the welding procedure for achieving the below mentioned benefits :

• Grinding and Chipping not needed for removing spatters

• Slag are easily removed

• Drastic reduction in cleaning cost

• Dense and clean weld joint

• Gaseous and non-metallic inclusions are minimized

• Tremendous improvement in the efficiency of welder

• Gently removes spatters thus maintains smooth parent surface

• Eco-friendly product as it is free from chipping and grinding procedure

• Preferred by ISO-14000 organization, no health hazards thus safe for welders

• Enhances mechanical and metallurgical properties of weld metal

Converts existing rust into stable metal complex, forms protective coat and prevents further rusting
2. Eliminates complicated usage of sand blasting,wire brushing and mechanical grinding, saving time and labour
3. Converts the complete structure rust oxide into stable metal complex minimizing the labour cost
4. The final film formed on the original surface fails to hinder with the bond strength on the concrete to the steel bars in RCC structures or any other coating that is finally applied over it
5. Enhances 10 times life at a marginal extra cost when compared to the conventional products (non-film formers), offering better protection
6. Does not require intensive surface preparation except for proper cleaning of pitted iron surface
7. The product being a water based system, is environment friendly, non-flammable, non-toxic and neutral when compared to other solvent based systems
8. Dry film highly abrasion resistant and resistant to common household chemicals
9. Good UV resistant
10. Capable of withstanding general temperature shocks without becoming chalky or brittle
11. Provides an aesthetic and convenient to maintain rust-free surface when applied to the surface
12. Easy to apply using roller or brush

E-Polish 250 is essentially the reverse electrolysis process by which a metal is removed from a work piece by passing appropriate electric current while the work is dipped in a specially-formulated solution. In an E-Polish 250 system, the work piece is dissolved by adding metal ions to the solution thus removing flaws from the surface of the metal part.

E-Polish 250 is a precision controlled electrochemical elimination of the surface metal, ensuing vivid “mirror like” look with enhanced chromium enriched metallurgical surface properties. Referred as “reverse plating”, this process has a levelling effect producing smoothness and enhanced reflectivity. Most significantly, the distorted, vague surface layer of the metal is removed off, thus leaving a chromium-rich, passive surface free of embedded contaminants like iron and work-inducted residual stresses from machining and forming. This procedure is safe and does not cause etching and pitting under controlled situations. E-Polish 250 will eliminate hydrogen from the surface limiting the bacteria growth.