Made high-strength close grain cast iron carburized and hardened high tensile strength steel, including a full control by magnetic particles. In order to assure the values of pressure angle, pitch and run (fr.) worm tested as per the norms under the keen inspection

Our mobile racks are designed for use in places where there are limitations on available space. Our range of high quality mobile racks have aisles only on one side. These high storage capacity racks that we manufacture and supply are available in two types: manual (Push & Pull type) and mechanically operated (chain driven) system. The choice depends on the requirements and space constraints. Our rail mounted racks are suitable for all kinds of storage requirements

A mezzanine floor is an excellent way of gaining additional space without building. Mezzanine floors offer a good space-saving option where there are severe space constraints. Many of our customers place orders with us for the design, fabrication and installation of mezzanine floors as per their requirements. These are pre-fabricated and pre-painted at our factory. Standard, ready made mezzanine floors are also available. Easy to assemble at the client's site, our mezzanine floors are very popular among clients representing a wide spectrum of industries. Complete construction of these mezzanine floors is done with fasteners without any use of welding. The mezzanine floors are manufactured using sheet metal, and can take load from 500 kg Uniformly Distributed Load (UDL) per sq. mtr. up to 2500 kg UDL per sq. mtr.

Steel pallet racking are used largely in automobile factories. Steel pallets or steel pallet racking are made of high tensile steel to take the load pressure on them.

Warehouse Pallets are used largely to store material in a systematic way. These steel pallets are used by large industries, hypermarkets, supermarkets back-end operations and to properly store the material and move it in an organized way.

Our Product range includes Dirty Dish Landing Table / Soiled Dish Receiver, Kitchen work Table, Dining Table, Stove Table etc.

These are available in various sizes. The silicon which is of food grade quality, transparent in appearance, non toxic is moulded on the stainless steel ring. The Sieve is easy to use, wash and maintain. These Sifter Sieves are safe as they are made with high quality material. The mesh size varies from 4 mesh to 500 mesh with A.S.T.M. standard being certified on 90 X microscope. We market our product at competitive prices.

*Lead free and available with complete set of certificates.

We provide best quality Multimilll Screen. Multimill Screen is available in various sizes including lab model. This product is made available as per the requirements of customers. The most common size used for Multimill Screen is as follows:

265 mm diameter * 140 mm height.
Available from 0.5 mm to 25 mm, hole diameter in perforation.
Sizes below 0.5 mm can be made in wire mesh design.

*Lead free and available with complete set of certificates.

hese are available in various sizes including lab model. During the manufacturing process our professionals take great care. This product is available with perforation and also in wire mesh design. This product is made available as per the requirements of customers. The most common size used for Cadmill Screen is as follows:

150 mm width * 561 mm length.
Available from 0.5 mm to 25 mm, hole diameter in perforation.
Sizes below 0.5 mm can be made in wire mesh design.

*Lead free and available with complete set of certificates.

These are available in various sizes. During the manufacturing process our professionals take great care. This product is available with perforation and also in wire mesh design. This product is generally made available as per the requirements of customers. The most common size used for Pulveriser Screen is as follows:

175 mm width * 480 mm length.
Available from 0.5 mm to 25 mm, hole diameter in perforation.
Sizes below 0.5 mm can be made in wire mesh design.

*Lead free and available with complete set of certificates.

We offer our clients an extensive range of Turbo Shifter & Turbo Multi-Mill Screen. Both these components are in a single machine for best quality productivity. This product is available with perforation and also in wire mesh design. This product is made available with us in customised size. The most common size used for Turbo Sifter and Turbo Multimill Screen is as follows:

Available from 0.5 mm to 25 mm perforation.
Sizes below 0.5 mm can be made in wire mesh design.

*Lead free and available with complete set of certificates.

Test Sieves are available in various sizes. 220 mm in diameter is the most common size used generally. Test Sieves are available in Brass frame and Stainless Steel frame. Sieves are available with brass frame and mesh, brass frame with stainless steel mesh or stainless frame and mesh. Brass sieves are cost efficient while stainless sieves tend to last longer and have sag-resistant mesh screen. The mesh size varies from 4 mesh to 500 mesh. This product is made available as per the requirements of customers. The most common size used for Test Sieves is as follows:

220 mm diameter.

*Lead free and available with complete set of certificates.

We have been engaged in providing a good quality range of Hand Sieving Frame that is available in different sizes and shapes; these are commonly used in round or square shape. This Sieving Frames are used for hand filtration purpose or, on a container or drum. Available from 4 mesh to 500 mesh.

*Lead free and available with complete set of certificates.

We provide Co-mill Screen in different sizes depending on the capacity of machine. . This product is available with perforation and also in wire mesh design. This product is made available as per the requirements of customers.

Available from 0.5 mm to 25 mm, hole diameter in perforation.
Sizes below 0.5 mm can be made in wire mesh design.

*Lead free and available with complete set of certificates.

Fluid Bed Dryer Sieves are available in various sizes from 30 kgs to 200 kgs. Sieves used are dutch woven screen, hollender screen the most common sieve used is 24 * 110 mesh, when the particle size is less 30 * 150 mesh and 40 * 200 mesh is use, only round cut sieve is available and option of silicon moulding on the periphery is also offered. This product is made available as per the requirements of customers.

*Lead free and available with complete set of certificates.

F.B.E. Dryer Sieves are available in various sizes from 125 litres to 800 litres, sieves used are dutch woven screen, hollender screen. The most common sieve used is 30 * 150 mesh sometimes depending on the particle size 24 * 110 mesh and 40 & 200 mesh is used. F.B.E. Dryer Sieves are available only in round cut sieve and option of silicon moulding on the periphery is also offered. This product is made available as per the requirements of customers.

*Lead free and available with complete set of certificates.

Wire Mesh are available in various sizes, from 2 mesh to 600 mesh. Available up to 10 microns. Different widths are available as per requirement; the most common width is 1 meter & 1.2 meters. This product is made available as per the requirements of customers.

*Lead free and available with complete set of certificates.