Application:

Our Machine suitable for Pharmaceuticals, Dairy, Distilleries & Breweries, Cosmetics & Food & Ancillaries Industries etc.

Description:

The External Vial Washing Machine is designed to wash the outer surface of round shaped Vials [5ml to 100ml Vials]. This machine washes the outer sides of Vials and eliminates the particles that are formed on the vials, which are previously filled and sealed.

Operation:

From the infeed Turn Table the vials are fed into the External Vial Washing Machine conveyors. The machine consists of two conveyors on which the vials are properly fed and transported from in feed Turn Table for the washing operation. Two operations are carried out on this machine. First the vials are washed by water jet and then dried by air jet. On the sides of the conveyor a set of spray nozzles are fitted on each conveyor for water jet. One set of knifes blocks are provided on each conveyor for air jet The air is sprayed through this knifes. The Knifes are fitted in an inclined manner which ensures that the air that is sprayed reaches each corner of the vial which are previously washed. After washing and drying the vials are guided to the out feed Turn Table. Before reaching the out feed Turn Table a special arrangement is provided to dry the vial from the bottom side. A set of syringes are provided on the sides of each conveyor at the exit end which sprays the air jet on the bottom part of the vial resulting in the drying of the vials This machine is completely operated by PLC. A covering of Acrylic cabinet is provided in the machine which when opened up during the operation immediately stops the supply of water & air and shows the indication with alarm in the PLC.

Technical Details:

Model No. SBEW-200
Direction Left To Right
Out/Put Up to 240 vials per minute depend on neck size & vial size
Electrical Supply 210 Volts 3 Phase 50/60 Hz (5 wire)
Power Requirement 3 HP
Height of Conveyor 900 mm (approx.)
Container Diameter 25 mm to 6o mm max.
Height 38 mm to 120 mm.

Salient Features:

Total cGMP model
S.S frame structure
"NO VIAL NO WASHING" system eliminates wastage of water & air
Easy cleaning & maintaining
Machine is equipped with PLC system.
Stops supply of water & air when acrylic doors opened during operation.
Indication & alarm in PLC
Normal water required for washing. No hot water required

Utilities: (To Be Provided By Buyer):

Pneumatic Air : Filtered, oil free, sterile low pressure Air at 5kg/cm2 (4/6 bar) 150 CFM.
Water supply : 150 Litres/hour (Approx)

Note: You can reuse the drain DM water which is used in the vial washing machine.

Application:

Our Machine suitable for Pharmaceuticals, Dairy, Distilleries & Breweries, Cosmetics & Food & Ancillaries Industries etc.

Description:

'Bhagwati High Speed Linear Bottle` Washing Machine is used for washing of Bottle`s and finds wide application in Pharmaceuticals Industries. The automatic loading arrangement facilities loading of Bottle`s on to SS wire mesh conveyor through feed conveyor or Bottle`s are pushed manually from feed table. This saves manpower as Bottle`s are feed into pockets automatically. The automatic unloading mechanism consists of unloading Bottle` continues on to turn table (Optional).

Operation:

Bottle`s will be pushed from in feed tray and then move on wire woven conveyor belt, which align the Bottle` in correct position, to enter in to the carrier pocket with help of oscillating guide rails. Oscillating arm deliver the Bottle` inside pocket in mouth down position over spraying nozzles. Multijet sprayers fixed at the top cause the total external and internal surface to be washed. To avoid any possible cross contamination between two different waters. Each washing station is provided with an independent circuit. Carrier pocket is moving with indexing motion. When the baskets have completed their motion the needles are lifted. They penetrate the Bottle`s, spraying jets of water or compressed air then return down. The baskets movement then advances by one station. Each station of Bottle`s passes through the washing cycles selected.

The duly washed Bottle`s then delivered to the out feed tray with neck opening upward and then automatically re ordered to a drying and sterilizing tunnel with back pressure.

Technical Details:

Model No. SBLBW-250
Direction Left To Right
Production Rate 12000 Bottle`s per hour depend on neck size & bottle size
No. of Pocket Across 20
Electrical Specifications

1 HP / 415 Volts / 50 Hz for Main Motor
1 HP x 2 = 2 HP / 415 Volts / 50 Hz For Each Pump 
3 Kw For Electrical Heater

0.5 HP / 415 Volts / 50 Hz For Conveyor
Power Requirement 440 Volts, 3 Phase (4 wire System) 50 Hz.
Tank Capacity 80 Ltrs. S.S. 316
Wash Cycle 3 Inner + 1 Outer + 1 Air
Cycle Timing 3.5 Second for each wash + 1.5 second for traveling.
Dimensions 2290 mm (L) X 1175 mm (W) X 1575 mm (H)
Net Weight 800 KGS. (Approx.)
Gross Weight 1250 KGS. (Approx.)

Salient Features:

Special Pocket system ensures easy and trouble free washing of Bottle`s from outer and inner side.
Indexing motion makes easier for syringes to move inside Bottle`, when it is in stationery motion.
No Change parts are required from 2 ml to 100 ml Bottle`. (Change parts are required 2 ml & 50,100 ml Bottle`s)
Washing cycles can be adjusted as per customer requirement.
User friendly machine, even semi skilled operator can operate the machine very easily.
A Special clutch device is incorporated for Stoppage of Machine in the event; Bottle` is over turned or over diameter.
Low RPM but High out/put.
Imported Gear Motor for +Main drive and conveyor.
A.C. Frequency drives for Main drive and conveyor.
Pumps with tank (60 litres each) 3 nos.
In feed conveyor belt system.
Suitable for 2 ml to 100 ml (. (Change parts are required 2 ml & 50,100 ml Bottle`s)
S.S. cGMP Model. S.S. 304 Frame Structure.
Suitable for 2ml to 100ml at Output Speed of 40 to 120 Bottle`s/Min.
Imported Gear Box for Main Drive & Conveyor Drive.
All contact parts will be of S.S. 316 material
In feed Wire Woven Belt for feeding of Bottle`s.
HDPE material Bottle` pockets.
Grand force Pump having S.S. 316 contact surface – 3 Nos.
10 Nos. Different Washing Stations and can change as per customer requirement.
Outer wash of Air & Water both.
Loading & Unloading of Bottle`s will be through mechanical Cams.
S.S. Filter Housing for Water & Air and machine consist of 3 Nos. Water Filter & 1 No. Air Filter Water Filter & Air Filter will be supplied with Nylon Cartage.
Recirculated Water Filter will be of 10 Micron.
D.M. & W.F.I. Water Filter will be of 5 Micron.
Air Filter will be of 0.22 Micron.
Total No. of Pockets is: 480 Nos.
Total 40 Rows & each Row is having 12 Pockets.

Application:

Our Machine suitable for Pharmaceuticals, Dairy, Distilleries & Breweries, Cosmetics & Food & Ancillaries Industries etc.

Description:

The Bhagwati Rotary Vial washing Machine is compact and highly efficient machine with elegant look. This multi functional multi featured machine meets the GMP requirements of washing for glass and plastic Vials. The machine operates on the Rotary principle with "GENEVA" mechanism and requires manual loading and unloading of Vials.

Operation:

The Vials are manual loaded and unload on rotating platform and are cleaned in series of operations. The Vials are hold in Vial holders that are specially designed to accommodate Vials with varying neck diameter and Vial diameter. The Vials are placed in an inverted position in these cup shaped holders. Spraying showers does the external cleaning of the Vials. Solenoid valves are provided to enable the regulation of wash timings and sequence of various washing media to suit specific requirement.

Technical Details: :

Model No. SBRW-50
Wash Cycle

First Wash 300 Ltrs/Hour Approx at 15 PSI. (Detergent Water).
Second Wash Minimum Consumption as such, water loss during recirculation shall be compensated. (Steam/Hot Water).
Third Wash 600 Ltrs/Hour Approx at 15 PSI. (D.M. or DL. Water)
Fourth Wash 15 PSI (Air)
OUT SIDE WASH 800 Ltrs/Hour Approx at 15 PSI (Ordinary Water)

Out/Put Up to 50 Bottle per minute (Depend on neck size & bottle size)
No. of Bottle Holder 32 jet
Electrical Motor

0.5HP/440 Volts/ 3Phase/ 50 Hz (Four wires) For Main Machine.

1 HP/440 Volts/ 3Phase/ 50 Hz (Four wires) For Water Pump.
Elec. Heater 3 KW. (For Hot Water)
Container Size Ø 25 mm to Ø 100 mm, Maximum Height 280 mm
Container's Neck Size

Ø 20 mm to Ø 38 mm, Maximum Height 280 mm

(With the help of required change parts)
Overall Dimension 1550 mm (L) x 1700 mm (W) x 1300 (H) Approx

Salient Features:

Geneva Mechanism.
70 Ltrs capacity water tank (Two Nos.)
Vial Guide System.
Out Side Wash system
S.S. Elegantly Matt Finish Body.
Solenoids valve to avoid leakage

Utility Requirement:

Electrical supply : 3 Phase + Neutral + Earthing
Electrical load : 2 Kw
Heater : 3Kw
Air Pressure : Minimum : 5 Kg/cm2 Qty: 5 C.F.M

Application:

Our Machine suitable for Pharmaceuticals, Dairy, Distilleries & Breweries, Cosmetics, Dry Syrup, Bulk Packing for Tablets & Capsules & Food & Ancillaries Industries etc.

Description:

Shree Bhagwati Automatic Vertical Air-Jet Cleaning Machine work on positive air pressure & vacuum cleaning. The unit is made compact, versatile and enclosed in stainless steel elegantly matt finish body, consists of S.S. Slat Conveyor & Reciprocating cleaning nozzles. No container No cleaning system arrangement is standard features of the machine. 

The main drive of the machine and conveyor drive consist of A/c Motor with synchronized variable A/c Frequency Drive.

Technical Details: :

Model No. SBVAJC-120
Out/Put Up to 100 Bottle per minute (Depend on neck size & bottle size)
No. of Cleaning Nozzles 8
Direction of Movement Left to Right
Electrical Specification** 0.5 HP / 415 Volts / 50 Hz.
0.5 HP x 2 = 2 HP / 415 Volts / 50 Hz.
Cleaning Cycle Positive air pressure and vacuum cleaning
Working height 860 to 910 mm

Salient Features:

GMP Model
Contact parts and non contact parts SS 304.
Positive air pressure and vacuum cleaning.
Easy operation.
Adjustable & diving type cleaning nozzles.
Automatic loading and unloading of container.
Individual control for air pressure and vacuum cleaning.
Higher capacity blower to clean properly.
S.S. pressure meter.

Application:

Our Machine suitable for Pharmaceuticals, Dairy, pesticides, Distilleries & Breweries, Cosmetics & Toiletries, Lube & Edible Oil, Food & Ancillaries Industries etc.

Description:

Automatic Linear Piston Filling Cum Sealing Machine is versatile, self-supported on stainless steel leg with height adjustable adjustment system. The machine is precision built on sturdy welded steel frame completely enclose in stainless steel sheet and doors are provided to facilitate the servicing of machine, work on volumetric principle with Linear motion. The unit is made compact, versatile and enclosed in stainless steel elegantly matt finish body. No container No filling & No Sealing system arrangement is standard features of the machine. The main drive of the machine, conveyor drive & cap-feeding bowl consist of A/c Motor with synchronized variable A/c Frequency Drive.

Operation:

Containers moving on SS Slat conveyor, feed below the filling nozzles through Pneumatic Stopper, Filling station consist of volumetric filling linear head and a side filling liquid 150 Ltrs tank. This reservoir tank fed continuously with the liquid by external source. Filling volume adjustment of individual syringe is possible with the help of mechanism provided on top of the individual syringe. 

After filling star wheel bringing the container below the sealing head in the subsequent indexing part, mean while the bottle pickup a cap from the delivery chute of cap feeding bowl, where the body and the neck of the container are positioned below the rotating head, where the sealing head is performing perfect operation of threading & sealing.

Technical Details: :

Model No. SBLPM-24/1
Output/Hour 4000 to 10000 Bottles per hour depends of the operator speed of fill volume and nature of Liquid
Number of head/sealing 24/1
Direction of Movement** Left to Right
Fill Size** 30 ml. to 1000 ml.
Electrical Specification**
Main Machine
Oriental Bowl
Conveyor

3 HP / 415 Volts / 50 Hz.
0.25 HP / 415 Volts / 50 Hz.
0.5 HP / 415 Volts / 50 Hz.

Height of Conveyor ** 910 mm to 960 Adjustable-
Machine Dimensions ** 3050 mm (L) x 1400 mm (W) x 2200 mm (H)
Case Dimensions 3250 mm (L) x 1600 mm (W) x 2200 mm (H)
Net & Gross Weight 2650 Kgs. & 3250 Kgs.
Change parts required (A) Container: Star Wheel, Back guide, Feed Worm, Nozzle 
(B) Cap: Die, Delivery chute, bowl. 
(C) Syringes (If volume higher/lower then above specification)

Salient Features:

"GMP" Model based on advanced technology.
Single Operator for Two Operations.
Less Floor Area -as both the sections driven by one motor.
No Contamination as immediate sealing of filled bottles.
Accuracy ± 1% due to piston dozing principle.
Centralized Volume Adjustment System.
No Bottle No Fill for Individual head, hence no spillages.
Placing of Cap Feeder Outside Monoblock-avoid entering of dust in it.
Better finish imported polished, laminated S.S. sheet used.
Drip trays under the conveyor.
Self Lubricating UHMW- PE Guide profile for Low friction wear surface, smooth and noiseless conveying.
Safety Guard for Operation and Protection.
Electronic Sensor at out feed for Bottle Jamming.

Optional Features:

Automatic chain washing system for conveyor belt.
In-built pre-inspection.
Nitrogen Flushing.

Utility Requirement:

Electrical Supply: Three Phase + Neutral + Earthing
Electrical Load: 3 KW
Air Pressure: Minimum: 6 bar pressure 0.5 CFM

Application:

Our Machine suitable for Pharmaceuticals, Dairy, pesticides, Distilleries & Breweries, Cosmetics & Toiletries, Lube & Edible Oil, Food & Ancillaries Industries etc.

Description:

Automatic Monoblock Rotary Piston Filling Cum Screw Capping Machine is versatile, self-supported on stainless steel leg with height adjustable adjustment system. The machine is precision built on sturdy welded steel frame completely enclose in stainless steel sheet and doors are provided to facilitate the servicing of machine, work on volumetric principle with rotary motion. The unit is made compact, versatile and enclosed in stainless steel elegantly matt finish body. No container No filling & No Screw Capping system arrangement is standard features of the machine. Main drive of the machine, conveyor drive & cap-feeding bowl consist of A/c Motor with synchronized variable A/c Frequency Drive.

Operation:

Containers moving on SS Slat conveyor, feed below the filling nozzles through feed worm & in-let star wheel, Filling station consist of volumetric filling head and a central rotating liquid reservoir tank. This reservoir tank fed continuously with the liquid by external source. In-feed liquid controlled automatically by sensing the liquid level in the reservoir tank with the help of floating level switch to actuate pneumatically operated solenoid valve. Fill volume adjustment can be done by a screw, which changes the volume of all the syringes simultaneously. Fine adjustment of individual syringe is possible with the help of mechanism provided on top of the individual syringe.

After filling star wheel bringing the container below the Screw Capping head in the subsequent indexing part, mean while the bottle pickup a cap from the delivery chute of cap feeding bowl, where the body and the neck of the container are positioned below the rotating head, where the Screw Capping head is performing perfect operation of threading & Screw Capping.

Technical Details: :

Model No. SBRPM-16/8
Output/Hour 7000 to 14500 Bottles per hour depends of the operator speed of fill volume and nature of Liquid
Number of head/sealing 16/8
Direction of Movement** Left to Right
Fill Size** 30 ml. to 200 ml.
Electrical Specification**
Main Machine
Oriental Bowl
Conveyor

5 HP / 415 Volts / 50 Hz.
0.5 HP / 415 Volts / 50 Hz.

0.75 HP / 415 Volts / 50 Hz.
Height of Conveyor ** 910 mm to 960 Adjustable-
Machine Dimensions ** 3660 mm (L) x 1700 mm (W) x 2400 mm (H)
Case Dimensions 3850 mm (L) x 1900 mm (W) x 2400 mm (H)
Net Weight 4200 Kgs.
Gross Weight 5000 Kgs.
Change parts required (A) Container: Star Wheel, Back guide, Feed Worm, Nozzle 
(B) Cap: Die, Delivery chute, bowl. 
(C) Syringes (If volume higher/lower then above specification)

Salient Features:

'GMP" Model based on advanced technology.
Single Operator for Two Operations.
Less Floor Area -as both the sections driven by one motor.
No Contamination as immediate Screw Capping of filled bottles.
Accuracy ± 1% due to piston dozing principle.
Centralized Volume Adjustment System.
No Bottle No Fill for Individual head, hence no spillages.
Placing of Cap Feeder Outside Monoblock-avoid entering of dust in it.
Less Caps in chute automatically stop the Machine.
Additional Sensors for Minimum and Maximum Level of Cap in chute which automatically Start and stop
Rotary cap feeder to avoid Damage of caps during Rotation and Wastage of Energy.
Better finish imported polished, laminated S.S. sheet used.
Electronic liquid level controller and pneumatically controlled control valve.
Drip trays under the conveyor.
Self Lubricating UHMW- PE Guide profile for Low friction wear surface, smooth and noiseless conveying.
Universal Coupling for quick and easy setting of In-feed worm.
Safety Guard for Operation and Protection.
Electronic Sensor at out feed for Bottle Jamming.

Optional Features:

Motorized Height Adjustments.
Automatic chain washing system for conveyor belt.
In-built pre-inspection.
Nitrogen Flushing.
Cap Elevator to feed caps to the cap feeding bowl.

Utility Requirement:

Electrical Supply : Three Phase + Neutral + Earthing
Electrical Load : 3 KW
Air Pressure : Minimum : 6 bar pressure 0.5 CFM

Applications:

Our Machine suitable for dry syrup, talcum, spices powder, flour Free Flowing Powders Chemicals, Pharmaceutical Powers, Food & Beverages, Cosmetics powder, Pesticides Powder etc.

Description:

Automatic Auger Type Dry Syrup Powder Filling Machine is a compact model used for filling Dry Syrup Powder in bottles.

Operation

The incoming dry bottle sterilized is fed through the in feed Turn Table with suitably guided on the moving Delran flat conveyor belt at the required speed for feeding. There are two separate filling head mounted on machine top plate in the same line. When bottle reaches to the first filling station, it will be held by the pneumatic bottle holder. Immediately it will be sensed by the bottle sensor as soon as it gets signals from sensor magnetic clutch starts to rotate which is mounted on auger shaft. It will fill the desired amount of powder to the bottle through auger, where rotation time is previously saved in PLC control. After filling of first bottle pneumatic piston goes back and release the first bottle to move on conveyor, By the same time second bottle also moves along with the first bottle in empty condition. In second filling head same operation will be performed but this time second bottle get filled and first bottle moves further for next operation.
The main advantage of this machine is Pneumatic bottle holding system is directly connected with Auger rotation, so till bottle get filled with powder as per set value pneumatic system will not going to release the bottle.

Technical Details: :

Model
Direction Left To Right.
Production Rate Up to 40 containers per minute
Fill Capacity 10gm to 50gm (with different set of Auger and funnel) Fill range depending upon Bottle opening and bulk density of powder.
Accuracy ± 2% depending upon consistency and the Uniformity of bulk density of powder under controlled level of Humidity (i.e.35%)
No. of Heads SINGLE
Electrical Supply 1.00 HP For Main Drive. 0.25 HP for conveyor
Power Requirement 440 Volts, 3 Phase (4 wire System) 50 Hz.
Height of Conveyor Adjustable from 850 To 900 MM
Pneumatic Air Filtered, oil free, sterile low pressure AIR at 5kg/cm2

Salient Features:

Total Compact c GMP model.
All parts and assemblies coming in contact with powder and rubber stopper are made of S.S.316 and easily removable for mandatory Autoclaving/ Sterilization.
"NO BOTTLE, NO FILL" System eliminates wastage of costly powder.
Conveyor driving is through High quality imported Gear motor
Machine speed can be adjusted by A.C. Frequency drive, which is time saving.
Machine is provided with delrin conveyor belt to avoid sticking of vial on conveyor.
Single track bottle movement, reduces setting of supporting guide rails and semi skilled person can also easily operate the machine.
Pneumatic bottle holding system is connected with auger rotation, which eliminates chances of bottle transfer before completion of filling operation.
No change parts are required for any change in bottle diameter from 30 to 120 ml.
Imported Gear Motor for Conveyor drive.
A.C. Frequency drives for Conveyor drive.
"No Bottle, No Filling" System.
Pneumatic bottle holding system.

Applications:

Our Machine suitable for dry syrup, talcum, spices powder, flour Free Flowing Powders Chemicals, Pharmaceutical Powers, Food & Beverages, Cosmetics powder, Pesticides Powder etc.

Description:

The Automatic High Speed Rotary Monoblock 16x8 Head Dry Syrup Powder Filling & Capping Machine Model SBPFC-16/8 is suitable for Glass, Plastic, PET, HDPE, and LDPE Bottles with maximum speed of 100 Bottles per minute depending on Powder Fill Volume, Type of Powder, Bottle Diameter and Bottle Neck Diameter. Machine in Stainless Steel Finish with heavy duty frame structure with S.S, Cladding. All parts coming in contact with Powders are made from SS 316 Materials and HDPE Funnels. The Machine works on proven time tested Vacuum and Air Systems to fill powder in Bottle achieving higher speed and higher accuracy. Machine with unique Bottle Lifting and Neck Holding system avoid spillage of powder on bottle shoulder, neck and body keeps bottle clean and also avoid wastage of powder. 

Machines require small area due to Monoblock design with Filling and capping operation. Machine with complete synchronization of Bottle Infeed Star Wheel, Powder Wheel movement and out feed Star wheel as well as capping operation for smoother operation. Machine with Rotary Bottle Moving system ensures very high speed powder filing through independent moving funnel along with bottles for greater speed and performance without compromising speed and fill accuracy. Machines with unique vibratory system inside the funnel helps filling of semi free flow type powder at higher speed. Machine can be used for ROPP (Alum. Cap) as well as Screw Cap with the help of change parts. However for common application of ROPP Cap and Screw Capping on same machine, please ensure that the thread of Screw Cap should not have more than 1.5 turn for Capping, for separate application any type of Cap can be used without limitation.

Technical Details: :

Bottle Diameter Up to 85mm*, Square or Rectangular bottles can be used
Bottle Height 100mm* Maximum
Cap any type of ROPP or Screw Cap, Sample required for evaluation
Fill Range 5gms to 30gms In Single Dose with the help of change parts for different fill volume
Fill Accuracy +1 to 2% Depending upon the Powder, under the controlled level of Humidity
humidity H Below 30% Rh required on machine to be arrange by customer
Electrical 415 VAC 3Phase and 220 VAC Single Phase Power Supply (50 Hz) with A.C. Drive
Power 2.0 H.P. For Machine and 3.0 H.P. For Vacuum Pump
Compressed Air Filtered, Oil Free 2kg/cm2 provided by customer only
Vacuum 28" Hg. @ 300 LPM, provided by Customers only, 500LPM recommended
Conveyor Height 815-940 mm
Overall Dimensions 2500 mm (L) x 1250 mm (W) x 2000 mm

Salient Features:

No Bottle – No Fill System
Unique Continues Motion Powder Wheel Movement for Smoother operation
Rotary Bottle Movement System with Rotary Funnel System
Funnel with Unique Vibratory system for filling semi free flow powder at higher speed
All contact parts with easy removal system for Cleaning / Auto Claving / Sterilization
Machine construction in SS304 material
Filling Accuracy of +1 to 2% depending on powder at controlled humidity below 30% RH
Automatic Infeed and Exit of Bottles through Star Wheel System
No Bottle at infeed conveyor - Automatic Machine on/off system
Low Air - Machine Stop System
Low Vacuum – Machine Stop System
Low Cap Level – Machine Stop System
Automatic Cap Feeder On - Off System to avoid damage to the cap avoiding extra movement
Toughened Glass Safety Cabinet
Blower for dust extraction

Applications:

VFFS Machine for Free flow powders such as coffee, tea products, spices like turmeric, chilly, spices powder, flours like wheat, Maida, besan powder, skimmed Milk powder, tooth powder, herbal powder, talcum powder, distemper powder, glucose powder, chemical, pharmaceutical, pesticides, insecticides, and semi solids like automobile & industrial greases, garlic paste, tamarind paste, ointments etc,

Operation:

The Bhagwati Make vertical form, fill and seal machine is handles a single reel film stock. Max. Reel Dia. is 530 mm on 76 mm core. The Auger Powder Filling Machine has the facility to be provided with a variety of filling heads. Draw down of the film is through draw down belts controlled through a servo motor. The length of the bag is controlled by print registration system which is PLC based. For unprinted film, the bag length can be adjusted from the single touch key pad provided on the front panel. The Auger Powder Filling Machine will accept most types of laminated films up to a maximum of 500 gauges. It is important that the sealing medium incorporates the best possible slip characteristics. Pure unsupported polythene film may be used with special impulse sealing equipment.

Technical Details: :Auger Powder Filling Machine

Feeding head Auger Screw filler with revolution counter
Production speed 60 to 70 pouches / min (depending on product)
Machine control system PLC (Programmable Logic Controller)
Packing range 14 gm to 50 gm
Film width up to 450mm
Film thickness 75-100 microns
Film material Laminated or Co-Extruded Virgin films
Sealer heating system Continuous or Impulse
Filling accuracy +/- 0.5 grams
Inner core Dia. of film roll 70 mm
Outer Dia. of the film roll Up to 400 mm
Pouch style Centre sealed Pillow type
Pouch width Up to 215 mm
Pouch length Up to 300 mm
Compressed air pressure 6 kg/cm² at 40º C
Air consumption 60 m³ / hour
Power consumption 3 KW / hour
Peak power 7.5 kW
Power requirement 3 Phase, 415 V, 50 Hz. Plus Neutral
Cooling water requirement 50 liters / hour (Reqd. for Virgin films only)
Film guard mechanism Auto stop when film is exhausted
Pouch Counter Provided
Date printing device Provided
Photo cell Provided
Machine dimensions 3000 (H) x 1500 (W) x 2000 (Depth)
Net Weight 1200 Kgs (approx)

Salient Features:Auger Powder Filling Machine

Very easy to operate
Products contact parts are made of stainless steel
Compact design with castor wheel for easy mobility
Unique online telescopic system for easy weight adjustment
Digital temperature controller
Heater indicator with buzzer
Digital Photocell control system automatically adjust & correct "Eye Mark"( ) within ± 1.5mm.
Wt. base to fill fresh French fries and frozen fries

Description:

Automatic Form, Fill and Seal machine with unique online telescopic cup adjustment system to pack various Granules and Powders like Sugar, Salt, Tea, Spices, Nankeen, Gutkha, Ayurvedic Powders, Milk Powder, Detergent Powder, Mouth Freshener, Tobacco, Pharmaceutical Tablets, O.R.S. Powder, etc. in laminated pouches.

Technical Details: :

Operating Speed 20 to 60 Pouch / Min.
(Depend upon the volume & Characteristic of the Material to be packed)
Power Required Motor : 0.5 to 1.0 HP : 220 V/Single Phase 50 – 60 Hz Heater : 1.2 Kw
Packing Range 0.5 gm to 25 gm with half of change parts
Packing Material All types of heat sealable laminated films
Optional Attachments Online Batch Coding Unit
Nitrogen Flushing System
Machine Dimensions L : 800 mm W :700 mm H :1800 mm Approx.
Net weight 300 – 450Kg. Approx.

Salient Features:

Very easy to operate
Products contact parts are made of stainless steel
Compact design with castor wheel for easy mobility
Unique online telescopic system for easy weight adjustment
Digital temperature controller
Heater indicator with buzzer
Digital Photocell control system automatically adjust & correct "Eye Mark"( ) within ± 1.5mm.
Wt. base to fill fresh French fries and frozen fries

Application:

Our Powder Filling Machine suitable for dry syrup, talcum, spices powder, flour Free Flowing Powders Chemicals, Pharmaceutical Powers, Food & Beverages, Cosmetics powder, Pesticides Powder etc.

Description:

Bottle's are coming from two ways conveyor & stopping by star wheel & fill through dozing wheel, accordingly can fill up to 30 gms up to 60 gms can fill by double doze. Setting of the dozing size is to be made by the help of Dozing arrangement [dozer].

Fill Capacity:

12 gms to 30 gms/ single doze with different powder wheel & up to 60 gms fill by double size fill depending on neck diameter and powder characteristics.

Accuracy:

+2% for Depending Upon the Consistency, Uniformity & Bulk Density of Powder under the Controlled Level of Humdity Below 30%.

Operation of the Equipments:

Conveyor transfer the bottles on to the start plate which indexes the tubes to the powder wheel where dosing of powder takes place. There are two powders Wheel given for dozing of the powder in the bottles. The powder is stored in a hopper which is agitated by pair of mechanical agitators for maintaining consistency and uniform bulk density.The powder wheel has eight rotating ports which rotate at pre-determined speed below the powder hopper with practically no clearance. The wheel consists of piston in each port, behind which there is vacuum plate again without any clearance with the help of spring pressure. Precise volume of powder is sucked with the help of vacuum, volume defined by the piston length and diameter is dozed in to the tubes while getting index and achieving the position vertically above the tubes

Technical Details: :

Model No. SBPF-D-80 - Powder Filling Machine
Product Dry Syrup Powder
Out Put Up to 70 Bottle Per Minute
Electrical Motor 1 H.P, 440 Volts, 3 Phase, 4 Wire Systems, 50 Hz
Accuracy ± 1% depending upon consistency and uniformity of bulk density of Powder under controlled level of humidity (below 28% Rh)
Compressed Air Max. 2 Kg /Cm2 Oil Free
Vacuum Pump 500 Liters Capacity for each head

Salient Features: Powder Filling Machine

Design confirms cGMP Norms.
All contact parts of SS 316
Powder wheel piston adjustable depending to filling.
Body makes to M.S. angle structure all covering to SS 304.
Two bottles setting separate adjusting for cantering to powder filling station. Salient Features of the Equipments.
No Container - No Filling" system eliminates wastage of costly powder
Over Load Relay for any over load accident.
Imported Gear Box with motor.
A.C. Frequency Drive
Acrylic Cabinet with imported Aluminium Structure provided on extra cost.

Application:

Our Machine suitable for dry syrup, talcum, spices powder, flour Free Flowing Powders Chemicals, Pharmaceutical Powers, Food & Beverages, Cosmetics powder, Pesticides Powder etc.

Description:

Automatic Auger Type Dry Syrup Powder Filling Machine is a compact model used for filling Dry Syrup Powder in bottles.

Operation:

The incoming dry bottle sterilized is fed through the in feed Turn Table with suitably guided on the moving Delran flat conveyor belt at the required speed for feeding. There are two separate filling head mounted on machine top plate in the same line. When bottle reaches to the first filling station, it will be held by the pneumatic bottle holder. Immediately it will be sensed by the bottle sensor as soon as it gets signals from sensor magnetic clutch starts to rotate which is mounted on auger shaft. It will fill the desired amount of powder to the bottle through auger, where rotation time is previously saved in PLC control. After filling of first bottle pneumatic piston goes back and release the first bottle to move on conveyor, by the same time second bottle also moves along with the first bottle in empty condition. In second filling head same operation will be performed but this time second bottle get filled and first bottle moves further for next operation. The main advantage of this machine is Pneumatic bottle holding system is directly connected with Auger rotation, so till bottle get filled with powder as per set value pneumatic system will not going to release the bottle.

Technical Details: :

Model No. SBAF-120
Direction Left To Right.
Production Rate Up to 100 Bottles per minute
Fill Capacity 5 gms as per Your Requirement (with different set of Auger and funnel) Fill range depending upon Bottle opening and bulk density of powder.
Accuracy ± 2% depending upon consistency and the Uniformity of bulk density of powder under controlled level of Humidity (i.e.35%)
No. of Heads Four
Electrical Supply 2.00 HP For Main Drive. 0.25 HP for conveyor
Power Requirement 440 Volts, 3 Phase (4 wire System) 50 Hz.
Height of Conveyor Adjustable from 850 To 900 MM
Pneumatic Air Filtered, oil free, sterile low pressure AIR at 5kg/cm2

Salient Features:

Total Compact c GMP model.
All parts and assemblies coming in contact with powder and rubber stopper are made of S.S.316 and easily removable for mandatory Autoclaving/ Sterilization.
"NO BOTTLE, NO FILL" System eliminates wastage of costly powder.
Conveyor driving is through High quality imported Gear motor
Machine speed can be adjusted by A.C. Frequency drive, which is time saving.
Machine is provided with delrin conveyor belt to avoid sticking of vial on conveyor.
Single track bottle movement, reduces setting of supporting guide rails and semi skilled person can also easily operate the machine.
Pneumatic bottle holding system is connected with auger rotation, which eliminates chances of bottle transfer before completion of filling operation.
No change parts are required for any change in bottle diameter from 30 to 120 ml.
Imported Gear Motor for Conveyor drive.
A.C. Frequency drives for Conveyor drive.
"No Bottle, No Filling" System.
Pneumatic bottle holding system.

Application:

Our Auger Powder Filling Machine suitable for dry syrup, talcum, spices powder, flour Free Flowing Powders Chemicals, Pharmaceutical Powers, Food & Beverages, Cosmetics powder, Pesticides Powder etc.

Description:

Automatic Auger Type Dry Syrup Powder Filling Machine is a compact model used for filling Dry Syrup Powder in bottles.

Operation:

The incoming dry bottle sterilized is fed through the in feed Turn Table with suitably guided on the moving Delran flat conveyor belt at the required speed for feeding. There are two separate filling head mounted on Auger Powder Filling Machine top plate in the same line. When bottle reaches to the first filling station, it will be held by the pneumatic bottle holder. Immediately it will be sensed by the bottle sensor as soon as it gets signals from sensor magnetic clutch starts to rotate which is mounted on auger shaft. It will fill the desired amount of powder to the bottle through auger, where rotation time is previously saved in PLC control. After filling of first bottle pneumatic piston goes back and release the first bottle to move on conveyor, by the same time second bottle also moves along with the first bottle in empty condition. In second filling head same operation will be performed but this time second bottle get filled and first bottle moves further for next operation. The main advantage of this Auger Powder Filling Machine is Pneumatic bottle holding system is directly connected with Auger rotation, so till bottle get filled with powder as per set value pneumatic system will not going to release the bottle.

Technical Details: : Auger Powder Filling Machine

Model No. Auger Powder Filling Machine - SBAF-100
Direction Left To Right.
Production Rate Up to 80 Bottles per minute
Fill Capacity 5 gms as per Your Requirement (with different set of Auger and funnel) Fill range depending upon Bottle opening and bulk density of powder.
Accuracy ± 2% depending upon consistency and the Uniformity of bulk density of powder under controlled level of Humidity (i.e.35%)
No. of Heads Three
Electrical Supply 2.00 HP For Main Drive. 0.25 HP for conveyor
Power Requirement 440 Volts, 3 Phase (4 wire System) 50 Hz.
Height of Conveyor Adjustable from 850 To 900 MM
Pneumatic Air Filtered, oil free, sterile low pressure AIR at 5kg/cm2

Salient Features: Auger Powder Filling Machine

Total Compact c GMP model.
All parts and assemblies coming in contact with powder and rubber stopper are made of S.S.316 and easily removable for mandatory Autoclaving/ Sterilization.
"NO BOTTLE, NO FILL" System eliminates wastage of costly powder.
Conveyor driving is through High quality imported Gear motor
Auger Powder Filling Machine speed can be adjusted by A.C. Frequency drive, which is time saving.
Auger Powder Filling Machine is provided with delrin conveyor belt to avoid sticking of vial on conveyor.
Single track bottle movement, reduces setting of supporting guide rails and semi skilled person can also easily operate the machine.
Pneumatic bottle holding system is connected with auger rotation, which eliminates chances of bottle transfer before completion of filling operation.
No change parts are required for any change in bottle diameter from 30 to 120 ml.
Imported Gear Motor for Conveyor drive.
A.C. Frequency drives for Conveyor drive.
"No Bottle, No Filling" System.
Pneumatic bottle holding system.

Description:

Automatic volumetric cups type powder filling machine is a compact model used for filling dry syrup powder in bottles.

The incoming bottle is fed through the in feed Turn Table with suitably guided on the moving delrin flat conveyor belt at the required speed for feeding. There are two separate filling head mounted on Granule Filling Machine top plate in the same line. When bottle reaches to the first filling station, it will be held by the mechanical holder. Immediately it will be sensed by the bottle sensor as soon as it gets signals from sensor magnetic clutch starts to rotate which is mounted on auger shaft. It will fill the desired amount of powder to the bottle through auger, where rotation time is previously saved in PLC control.

Technical Details: : Granule Filling Machine

Model Granule Filling Machine - SBCF-6
Direction Left To Right.
Production Rate

Up to 30 Bottles / Min (depend on filling volume and container neck dia.)

Fill Capacity 2 grms to 1000 grms. (with different set of Auger and funnel) Fill range depending upon Bottle opening and bulk density of powder.
Accuracy ± 1% depending upon consistency and the Uniformity of bulk density of powder under controlled level of Humidity (i.e.35%)
No. of Cups 6
Electrical Supply 1.00 HP For Main Drive. 0.25 HP for conveyor
Power Requirement 440 Volts, 3 Phase (4 wire System) 50 Hz.
Height of Conveyor Adjustable from 850 To 900 MM

Applications:

Our Machine suitable for Pharmaceuticals, Dairy, pesticides, Distilleries & Breweries, Cosmetics & Toiletries, Lube & Edible Oil, Food & Ancillaries Industries etc.

Description:

The Bhagwati automatic cap sealing machine is precision built on sturdy welded steel frame completely enclose in stainless steel sheet and doors are provided to facilitate the servicing of machine.

Operation:

The feed container moving on conveyor belt are feed into an in feed star wheel, bringing the container below the sealing head in the subsequent indexing part, mean while the bottle pickup a cap from the delivery chute of cap feeding bowl, where the body and the neck of the container are positioned below the rotating head. Where the sealing head is performing perfect operation of threading & sealing. Specially designed hopper is provided for more storage capacity, deliver cap to delivery chute with correct position that ensures the perfect position of the cap at the end of delivery chute. The capping head rotate along with the main turret and perform the capping operation.

Technical Details: :

Model SBCS-200P
Output / Hour* Up to 180 bottles per minute (depend of bottle and Cap sizes)
Direction of Movement Left to Right
No. of Sealing Head 8 Nos.
Electrical Specification** Main Motor

2 HP / 415 Volts / 50 Hz.

0.25 HP / 415 Volts / 50 Hz.
Height of Conveyor** 860 mm to 910 mm
Machine Dimensions** 2135 mm (L) x 1200 mm (W) x 2250 mm (H) Approx
Case Dimensions 2650 mm (L) x 1320 mm (W) x 2250 mm (H) Approx
Net Weight 1200 Kgs. Approx
Gross Weight 1550 Kgs. Approx

*Depends on bottle size, cap size and type of cap. ** We can supply as per customer requirements. *** With help of change parts.

Salient Features:

The unit is made compact & versatile.
S.S. Slat conveyor
S.S. Elegantly Matt Finished Body
Built in front control panel
Vibratory Bowl
With A/c Frequency Drive

Utility Requirement:

Electrical supply: 3 Phase + Neutral + Earthing
Electrical load : 1.5 KW
Vibrator: 5 Amps

Applications:

Our Machine suitable for Pharmaceuticals, Dairy, pesticides, Distilleries & Breweries, Cosmetics & Toiletries, Lube & Edible Oil, Food & Ancillaries Industries etc.

Description:

The Automatic Linear Measuring Cup Placement / Cap Pressing Machine Model SBCPP-120. Machine is suitable for Round or other shape of Glass, Plastic, PET, LDPE, and HDPE Bottles with maximum speed of 120 Bottles per minute depending on Bottle Diameter, Bottle Height, Bottle Shape and Measuring Cup / Cap Size. 

Machine with special Linear Design with No Change Parts system for Change in Bottle Size. Machine with Totally Synchronized Front and Back Bottle Holding Belt with Top Stabilizing and Pressing Belt System.

Specially Machine construction in Stainless Steel finish including machine M.S. frame structure with Stainless Steel Cladding/Enclosures. Machine is ideal for application in Pharmaceutical, Food, Pesticides, and Cosmetic & Other Industries. Machine with user friendly operation to handle various type and size of bottles.

The Machine is equipped with Orientation type Cap Feeder or Vibratory type Bowl Feeder depending on cap shape and size for continues feeding of Measuring Cup / Cap for online operation on any liquid of powder filling line. Machine suitable for various sizes of Bottles and Measuring Cup / Cap with the help of change parts. Machine is suitable for application in Pharmaceutical and other industries requiring higher production speed on automatic online operation.

Operation:

The feed container moving on conveyor belt are feed into an In-feed star wheel through In-feed worm, star wheel bringing the sealed container below the pressing plate, mean while the sealed bottle pickup a cup from the delivery chute of bowl, where the body and the neck of the container are positioned below the pressing plate, where the pressing plate press cup gradually & performing perfect operation of cup pressing.

Technical Details: :

Model SBCPP-120
Speed : Up to 120 Bottles per minute depending on Bottle and Cap Size
Bottle Size : Diameter Up to 85mm* or other Shape bottle with proper base
Bottle Height : 300mm* Maximum
Measuring Cup / Cap Size : Actual Samples required
Electrical : 415VAC 3Phase and 220 VAC Single Phase Power Supply (50 Hz) with A.C. Drive
Power : 2.0 H.P.
Conveyor Height : 850-900 mm
Overall Dimensions : 2200 mm (L) x 957 mm (W) x 1900 mm (H)
Change Parts Required (A) Container: Star Wheel, Back guide, Feed Worm.
(B) Cap: Delivery chute, bowl

* Depends on size, shape and Neck Dia of container. ** Can be supplied as per customer requirements. *** With help of change parts.

Salient Features:

SS elegantly matt finished body Single motor synchronizes conveyor, star wheel, & platform turret.
Adjustable height of conveyor belt, to align with other machine of the line.
Specially designed hopper is provided to increase storage capacity of bowl.
Low noise level, low power consumptions.
Self lubricating UHMW- PE guide profile for low friction wear surface, smooth and noiseless conveying.
SS cladding or hard chrome plating of all exposed parts to ensure long life and resistance against Corrosion.
A/C drives to synchronize, Conveyor, Star wheel and Platform turret & capping bowl.
Universal coupling for quick and easy setting of In-feed worm.
No cup no container arrangement.

Utility Requirement:

Electrical Supply: Single Phase + Neutral + Earthing
Electrical Load: 0.75 KW

Applications:

Our Machine suitable for Pharmaceuticals, Dairy, pesticides, Distilleries & Breweries, Cosmetics & Toiletries, Lube & Edible Oil, Food & Ancillaries Industries etc.

Description:

"BHAGWATI" Automatic Screw Capping Machine is versatile, self-supported on stainless steel leg with height adjustable adjustment system. The machine is precision built on sturdy welded steel frame completely enclose in stainless steel sheet and doors are providing to facilitate the servicing of machine.

Operation:

The feed container moving on conveyor belt are feed into an in-feed star wheel, bringing the container below the sealing head in the subsequent indexing part, mean while the rotating head pickup a cap from the cap star wheel which is receiving from delivery chute of cap filling bowl, where the body and the neck of the container are positioned below the rotating head, where the sealing head is performing perfect operation of sealing, rotating head is design to seal container according to pre-set torque.

Technical Details: :

Model SBCS-200S
Output/Hour* Up to 180 bottles per minute (depend of bottle and Cap sizes)
Direction of Movement Left to Right
No. of Sealing Head 8 Nos.
Electrical Specification** Main Motor
Cap Feeding Bowl

2HP / 415 Volts / 50 Hz

-
Height of Conveyor** 860 mm to 910 mm
Machine Dimensions** 2135mm(L) x 1200mm(W) x 2225 (H) Approx
Case Dimensions 2650mm(L) x 1350mm(W) x 2250 (H) Approx
Net Weight 1050 Kgs
Gross Weight 1400 Kgs

*Depends on bottle size, cap size and type of cap. ** We can supply as per customer requirements. *** With help of change parts.

Salient Features:

No container no cap arrangement.
Single motor synchronizes conveyor, star wheel & platform turret.
Adjustable height of conveyor belt.
All contact parts are made out of stainless steel.
Pick & Place arrangement.
Torque adjustable.
Low noise level, low power consumptions.
AC frequency drive for variable speed

Utility Requirement:

Electrical Supply : Three Phase + Neutral + Earthing
Electrical Load : 1.5 KW
Air Pressure : Minimum: 6 Bar, 0.5 CFM.

Applications:

Tube Labelling Machine adopts advanced technology and high-powered components---small inertia stepper motor to reach the real perfect labelling. The system carries out high response and highly reliability by the professional approved program controller and stepper system, it carries out communication between machine and man by micro processor control panel, the precision of the main machine can during the process of the sending label control.

This model is suitable for various dia. tubes i.e. 19 mm to 60 mm. The machine operates at the speed up to 60 tubes / min. Automatic feeding & air ejection system can also be provided for loading and un-loading of tubes. The machine comes with salient features like No tube - No label. Transparent film label can also be applied without eye - mark with the help of mechanical sensor.

Technical Details: :

Model SBHSL-60
Label speed Up to 60 tubes/min
Label accuracy ±1mm
Label Length (Max.) 150mm
Label width (Max.) 90 mm (H)
Tube diameter (Max.) ф65mm
Tube diameter (Min.) ф19mm
Tube length (Max.) 220mm
Label Reel Core Diameter ф76.2mm
Power 220V 50Hz 3000W
Weight 300 kgs

Features:

The Machine can also apply 2 labels i.e. front & back. Label orientation w.r.t cap or tube design can be provided. The machine can also apply front & back labels with orientation.
Apple Pack we guarantee all our tube labeler for one full year, beginning on the day of shipment, against any problems that you may experience as a result of faulty workmanship. 
We also guarantee the lowest prices of all tube labeler on the market that is of a similar quality and workmanship. This way you can avoid the headaches of having to do price comparisons or cost-benefit analyses, since you can be sure you are getting the lowest price anytime you purchase any of our new packaging equipment.
We offer fast and friendly service to all our customers and potential clients. Whether you are calling to inquire about new packaging machinery or have questions after having bought our equipment, our staff will be more than happy to answer all your questions as fast and as honestly as possible.

Description:

Semi Automatic Labeling Machine Model, being the latest addition in the range of labelling machine. The machine is suitable for round Containers with the pack size of Appx. 30ml to 1/5 Ltr. Appx., be they of Glass, Aluminium, Composite, HDPE, Pet, Tin or Glass. Most important feature of the Labelling Machine is that it does not require any change parts for change in sizes of Container or Label.

Application: any type Aluminium, Composite, HDPE, Pet, Tin or Glass bottle Suitable for Pharmaceuticals, Food, Beverage, Distillery, Cosmetics, Pesticides, Chemicals, Agro Chemical and similar products.

Technical Details: :

Bottle size (Ø) 15mm Ø to 90mm Ø
Output speed 15 to 20 BPM
Label size ( H x L ) Min 15 and 250 mm
Working Height Table top
Power Consumption 0.2 KW
Power Supply Single Phase, 230V, 50 Hz
Air Supply 4 to 6 Kg/cm2
Net Weight 150 kgs
Dimensions 1250mm (L)x 650mm (W)x 1120mm(H)

Salient Features:

The unit is made compact & versatile as per GMP norms.
The whole structure is made of SS304.
Easy to operate by foot mounted switch.
Can be operated by semi-skilled operator.
The machine can be utilized for various sizes (Diameter) of bottles.
User friendly and very less maintenance required.
Height can be easily adjusted as per the products.
Any type of coder can be attached
It consists of fibre optic based label gap sensor & product sensor.
Break assembly to avoid variation.
Label roll of 300 Diameter can be installed.
The product holding roller is driven by Geared motor, make PANASONIC.

General Description:

Bhagwati Shrink-Sleeve Labelling Machine high speed uses newest shrink technology with MMI and PLC base control panel. The bary centre and base have been accurately design, even use this machine with high speed for long time machine running still very stable and smoothly.

Many model with all kind of speed selection from 50/minute to 200/minute and is suitable for wide range; it can be modified according to package's shape. Can meet, all kind of required no matter it is for cap or bottle. The machine is suitable for Pharmaceutical, food industries; it can be for health-food, medicines, Juices, Milk, Drinks, etc.

Application:

Beverage, Cosmetic, Dairy, Food & Pharma.

Technical Details: :

Model SB-SLEEVE-250
Voltage 220V/380V 50/60 HZ 3 PHASE
Bottle Diameter Ø55~Ø95 / Ø95~Ø125
Max. Speed Up to 250 Bottle per minute
Power 2.5KW
Label Insertion Length 300MM
Range Of Label Thickness 0.035~0.08MM
Material PVC/PET/OPS
Shrink Tunnel Capacity 5KW~17.5KW

Salient Features:

The unit is made compact & versatile as per GMP norms.
The structure of sleeve applicator and conveyor are made of SS 304 and the structure of tunnel is made from MS with powder coating.
Rigid vibration free construction for trouble free performance.
The SS 304 slat conveyor for proper product conveying. (For the processes of sleeve inserting and sleeve shrinking.
Worm for the positive feeding.

General Description:

Bottle neck and body shrink sleeve label applicator adopts PLC programmable controller, imported servo motor, servo driver, frequency converter and transducer; besides, it adopts the positioning module to ensure the casting label precise, rapid and stable. It not only has a highly precise position for casting label, but also can withstand the perfect shape of the bottle after shrinkage.

Application for Bottle neck and body shrink sleeve label applicator

Bottle neck and body shrink sleeve label applicator applies to food & beverage industries as fruit juice, tea, drink, dairy products, pure water, condiments, beer and sports drink etc. Of all kinds of bottles; It suitable for various kinds of bottle types, for example: round bottle, square bottle, flat bottle, curved bottle and cup-shaped, etc. It not only has a highly precise position for casting label, but also can withstand the perfect shape of the bottle after shrinkage.

Technical Characters for Bottle neck and body shrink sleeve label applicator

All-cover type stainless steel host machine:the whole machine is waterproof as well as rustproof.
Adjustable cutter head: uniquely cyclotron cut-off, double sided cutting edge with a long service life.
Single positioning center guide pillar:a more stable for label delivery.
Synchronous bottle divider: a more stable transmission for bottle.
Bottom set of label brush: a more precision for casting label.
Label-controlling electric-eye shelf: unique combination of tail and electric-eye to improve the precision for cutting off the membrane materials.
Push-button control cabinet:a more humanized operation.
Independent feeding material shelf: the position of the material shelf is optional at will.

Technical Parameters for Bottle neck and body shrink sleeve label applicator

Model SB-SLEEVE-120
Input Power 3KW
Input Voltage 3, 380/220VAC
Production Efficiency 150*2 Bottle/ min
Applicable Diameter of Bottle Body 28mm-125mm
Applicable length of Label 30mm-250mm
Applicable thickness of Label 0.03mm-0.13mm

Description:

To increase the production and efficiency, we have specially designed Semi Automatic Cartooning Machines. Our Semi-automatic cartooning machine speeds up the cartooning process in every possible way. The horizontal semi-automatic cartooning machine manufactured by us is ideal for pharmaceuticals. It is also suitable for a wide range of bottles, containers pouches, blister packs, etc. Thus we are famous exporters of it from India Brief Introduction Model SBSAC-60 semi automatic cartooning machine (carton folding~filling~packing) It is specially design to pack small quantity of diverse packaging. With low cost and it only require small area. It is suitable for various sizes of carton. 

The machine is a vertical type with multiple functions and requires a short time to change parts. The machine is made of Aluminium alloy with anode treatment. Rust proof long lasting life cycle and clean. Suitable usage: Medicine, food-stuff, cosmetic, etc. packing into square carton

Technical Details: :

Model No.

SBSAC-60

Box Size Max. 80 x 80 x 200mm (L*W*H)
Min. 15 x 8 x 40mm (L*W*H)
Leaflet Size (In case of) -4 Manually folded Max. 200 x 60mm (L*W*H)
Min. 100 x 8mm (L*W*H)
Output Speed 20 to 60 boxes/min. max
Working Height 700 +/- 50mm
Power Consumption 0.5 HP, 0.37 KW
Power supply 1 Phase, 230 V, 50 Hz
Air Supply 9Kg/cm2
Air Consumption 10 CFM
Net Weight 350 Kg.
Dimension 750 x 850 x 1200mm (L*W*H)
Carton Paper Thickness 250 gm / 300 gm
Leaflet Paper Thickness 500 gm / 60 gm

Salient Features:

The unit is made compact & versatile as per GMP norms.
The structure of sleeve applicator and conveyor are made of SS 304 and the structure of tunnel is made from MS with powder coating.
Rigid vibration free construction for trouble free performance.
The SS 304 slat conveyor for proper product conveying. (For the processes of sleeve inserting and sleeve shrinking.
Worm for the positive feeding.

Working:

Automatic feeding by slant magazine allows labels to a polished stainless steel feed wheel, The Label is picked up by rubber and it is fed to a timing chain, which carries the label under the printing head. Very useful machines to all Pharmaceutical & other packaging industries to print Batch No.., Mfg. Date., Exp. Date., Retail Price etc. on their Labels, Cartons, Polypack Bags, Pouches, tin Bottoms, Cotton Bags etc.
Hand Operated and Semi Automatic Batch Printing/Coding Machines are working on the same principal of tradle machine conventionally used by all the printers. In both the machines the matter is to be composed in type block with type letters. Ink to be fed on the Aluminium Roller. On each stroke of the machine the composed type letters are linked by moving Rubber Roller. Label/Carton/Bag fed on plate is getting positive impression by inked type letters. Semi Automatic Batch Printing/Coding Machine is Electrically Operated and foot Switch is provided to 'ON' or 'OFF' the machines as both the hands of the operator remain free in convenience of feeding and discharging the Labels/Cartons/Bags. While in Hand Operated Batch Printing/Coding Machine in addition of feeding and discharging the Labels/Cartons/Bags by hand, the stroke of the machine is also operated by hand.

Technical Details: :

Control Unit

Atron Size

325 mm x 185 mm Maximum 
100 mm x 50 mm Minimum

Output 125 Carton Per Minute 
180 Carton Per Minute 
250 Carton Per Minute
Power 0.25 HP/1440 RPM/414 V/3 Phase
Use Of Letters Metal Type & Rubber Stereo
Dimensions 863 mm (34") Length 
762 mm (30") Width 
610 mm (24") Height
Net Weight 115 Kgs. Approx
Gross Weight 175 Kgs. Approx

Salient Features:

Windows based operating system: More user friendly as compared to DOS based operating system.
On board multiple raster selection: It helps to select suitable raster format and achieve optimum print quality & print speed with respect to each application.
Clear Nozzle Test Routine: It cleans nozzle automatically in service mode resulting in better uptime and lower operator intervention.
Customized Message Settings: It not only stores the message but also its parameters such as character height, width, etc. This reduces setup time at the time of changeover and hence increases line efficiency.
Security Manager: Allows multiple levels of security/ password protection.
In built USB Port: To allow for exporting messages, logos, print settings (height, width, delay, etc.) for restoring printer setting or transferring to another printer. This feature helps to reduce setup time.
Built in Alarm Port: You can interlock it with production line so that if the ink jet.
Printer trips, it will stop your production line. Thus ensuring that no product moves out of your factory un-coded.
Built in Ethernet Port: You can connect printer to your LAN and can access following parameters with web server settings:
Remote message selection via web server
Remote view of production statistics
Remote view of alerts & events
Remote view of fluid levels
Simultaneously view multiple printer status' remotely

Technical Details: :

Control Unit

Control Panel

Cabinet
Cabinet dimensions

Weight

Membrane touch button or optional 10.4" SVGA
Colour touch screen.
Stainless Steel (304) designed to IP53 (BSEN 60529:1992)
245mm x 475mm x 725mm (9.6" x 18.7" x 28.5")

36kg (79lbs)
Character Control

Auto repeat, Character width and height adjustment,
Auto invert/reverse, User defined clock format, Print delay,

Sequential/batch numbering, Product counter, Inverse reverse and bold characters, Message repeat.
Ink System
Viscosity control Automatic
Ink bleed control Automatic on start up
Ink and make-up refill 825ml (.87qt) cartridge automatically metered
Peltier Optional
Print Head

Dimensions
Conduit length
Positive air

Air dryer

240mm x 41mm x 47mm (9.45" x 1.61" x 1.85")
3m (11'8) or 6m (23'6)
Optional internal supply

Internal compressor or factory air option
Environment

Temperature range
Humidity

Electrical requirements

5 – 45°C (40 – 112°F) operating
10 – 90% (non-condensing)

Single phase, fully auto-ranging 100-250V, 47-63Hz
Standard Connections:

Product detector

Shaft encoder input
Alarm beacon connector
Auxiliary alarms connector
Ethernet

USB1.1

NPN/PNP 12V 100MA for photocell or proximity detector.
IP68 6-way socket
NPN/PNP encoder 12V via IP68 6-way socket
IP68 7-way socket
IP68 9-way plug
IP68 RJ45 Connector

IP68 USB connector
Options
User port connector IP68 25-way socket
Data Input/output Options Serial RS232, Rate: 110-38.4k Baud, software configurable,
Accessories Full range of photocells, stands and bracketry

Technical Details: :

Available in S.S./M.S. model.
Available as per your require speed, length, height & width.
Structure is made of S.S. 304 / M.S. 32mm square pipe with matt finish / painted.
Table top is made of S.S.304, 16 gauge sheet with matt finish.
Conveyor Belt is supplied with 3 speed pulley.
Special Self-aligning bearing ensure smooth and trouble free rotation of the Roller.
Conveyor belt is used as a PVC coated canvas belt / endless rubberised belt.
The Reduction Gear Box provides jerk less & noiseless performance for long time.

Description / Specification of Manual Vial And Bottle Inspection Machine

We are involved in offering a wide range of Manual Vial And Bottle Inspection Machine to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Manual Vial And Bottle Inspection Machine. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Optional Features:

All exposed parts of S. S. or Aluminium to avoid any rusting.
Reduction Gear ensures jerk free and Noiseless performance.
Square Frame imparts Vibration free performance and allows absolute cleanliness even inside.

Technical Details: :

Model No. SBTT - 30" 
SBTT - 36" 
SBTT - 42"
Power Characteristics 440 Volts, 3 Phase (4 Wire System), 50 Cycles/Sec.

Dimensions:

Model Nos. SBTT - 0760 SBTT-0915 SBTT-1065
Disc. Size 762 915 1066
A 0785 0940 1090
B 0585 0585 0585
C 1190 1345 1495
Motors H.P 0.75 0.75 1.00
Adjustable Height 740 to 840
All Dimensions are in mm

Note: Dimensions & Technical Details are subject to change as per customers' requirement without any further notice

Description / Specification of Strip Packing Machines

We are involved in offering a wide range of Strip Packing Machines to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Strip Packing Machines. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description:

The unfiltered liquid is fed into the filter under positive pressure, where liquid travels in downwards direction and finds its way through opening on sides of the Filter Plates. As the liquid pressure increases, the Filter media holds the foreign particles and allows only clear filtrate to pass through the central channel formed by interlocking pressure cups to the outlet. Filtration is continued until the cake holding capacity of the unit is reached or until the filtrate rate becomes too slow owing to cake resistance.
 

Horizontal Plate Filter Press is enclosed construction, preventing evaporation, oxidation, leakage and fumes escaping from product.
Filter plates are available in two sizes. Deep plate for large percentage of cake holding capacity and Shallow plate for small percentage of cake holding capacity.
The horizontal filter plate and even thickness of cake, prevents the cake dropping as well as cracking, thus assuring better filtrate quality.
The Filtration area and cake holding capacity can be increased or decreased according to requirement.

Technical Details: :

Types Diameter of Plate No. of Plates Filtering Area M2 Cake Holding Capacity Ltrs. Capacity Ltr / Hr
SB 8x6 8" 6 0.198 4.50 400
SB 8x8 8" 8 0.254 5.78 500
SB 14x8 14" 8 0.756 27.00 1500
SB 14x10 14" 10 0.924 35.00 1800
SB 18x8 18" D 8 1.270 51.00 2500
SB 18x15 18" S 15 2.270 44.00 4500
SB 18x12 18" D 12 1.840 78.00 3700
SB 18x23 18" S 23 3.400 65.00 6800
SB 24x12 24" D 12 3.430 148.00 6700
SB 24x23 24" S 23 6.336 120.00 12600
SB 33x7 33" D 7 4.000 175.00 8000
SB 33x14 33" S 14 7.500 210.00 15000

The values of "Flow-Rates" mentioned in technical specifications have been estimated for the following operating parameters:

Description:

The Cartridge assembly consists of plates, perforated screens, spacers and fitter media. Interlocking spacers internally form single pipeline. The unfiltered liquid is centrally fed under pressure from bottom inlet. The liquids spreads out equally on each plate fitted with filter media. Solids remain on filter media and clear. filtrate flows through precisely made holes on sides of plates and collects in the shell, which then comes out through the outlet. In this process, solids are evenly distributed on each plate. The cake is then cleaned from the filter material and used again for filtration process.
 

Single pass filtration with no solid bypass
Full batch recovery, no separate scavenging system needed.
Proper sealing which allows the filtration of volatile, toxic and inflammable products.
Plate pack arrangement ensures :
Any type of filtering media singularly or in combination can be used to achieve required micron efficiency.
Easy removal and cleaning of the Cartridge Assembly.
Closed System ensures :
Filtration of toxic, hazardous, explosive materials.
Efficiently cleaned and sterilized.
Central feeding ensures
No solid inside the vessel, complete recovery of liquids.
Cake solids can be maximum dried with N2
Complete cake retains over the plate.
Uniform filter-aid bed can be formed.
Reduces the cost of expensive solvents.

Optional Available:

Built In Stirrer Arrangement with Lifting and Lowering Device.
Steam Fittings with All Connections Factory Fitted.
Non Tilting Type With Bottom Discharge Models Are Also Available.
Capacities Available: From 10 Ltrs to 2000 Ltrs Capacity.

Functions:

Basically this unit is used for preparation of starch paste. Hemispherical shape ensures that the heating of the starch paste is uniform and gets more surface area. The tilting type arrangement ensures ease in unloading the paste into any container or vessel. The starch is put in the kettle and water is added till desired thickness is achieved. The kettle is jacketed and is heated till the starch melts and a thick paste is achieved. This paste can be agitated either manually or with the help of an anchor type agitator which will constantly stir the paste so that there will no lumps formation and proper mixing is achieved. Temperature can be set to desired temp by adjusting the thermostat provided and the temperature can be seen in the dial thermometer provided.
 

Salient Features:

Entire construction in Stainless steel
Semi hemispherical bowl ensure that entire bowl can be emptied by rotating the worm wheel.
Simplified construction enables ease of operation.
Steam or electric heating is possible depending upon the user requirements.
When used with stirrer / anchor the movement of anchor is forward and reverse using cyclic timer. Stirrer can be supplied at additional cost.

When supplied with stirrer, there is a top entry drive without using any "V" belt. Stirrer can also be removed for cleaning. Temperature indication is possible at additional cost.

Technical Details: :

Types

Diameter of Plate

No. of Plates Filtering Area M2 Cake Holding Capacity Ltrs. Capacity Ltr / Hr
SB 8x6 8" 6 0.198 4.50 400
SB 8x8 8" 8 0.254 5.78 500
SB 14x8 14" 8 0.756 27.00 1500
SB 14x10 14" 10 0.924 35.00 1800
SB 18x8 18" D 8 1.270 51.00 2500
SB 18x15 18" S 15 2.270 44.00 4500
SB 18x12 18" D 12 1.840 78.00 3700
SB 18x23 18" S 23 3.400 65.00 6800
SB 24x12 24" D 12 3.430 148.00 6700
SB 24x23 24" S 23 6.336 120.00 12600
SB 33x7 33" D 7 4.000 175.00 8000
SB 33x14 33" S 14 7.500 210.00 15000

The values of "Flow-Rates" mentioned in technical specifications have been estimated for the following operating parameters:

Fluid : Water
Insoluble : Carbon
Filter media: Non-woven polypropylene cloth of 418 grades.
Carbon loading: 5 Kg/m2 filtration area

Description:

"Bhagwati" starch paste kettle will be made out of SS 304 rectangular pipes of 3 mm the and will be an independent resting type frame work where no foundation will be required. The kettle will be a hemispherical type bowl with either steam / oil / water heating jacket will be provided. The kettle will be manufactured from 2.5 mm the SS 304 sheet and the jacket will be of 2.5 mm mild steel (in case of steam jacket the thickness will be 4 mm). There will be oil / water heated fitted at the back bottom side of the kettle. The kettle will be having a worm type arrangement for tilting. A temperature controller and a temp indicator will be provided for temp control and indication. The kettle will be insulated with 50 mm the glass wool insulation and cladded with 16 SWG SS 304 sheet. Kettle will be buffed to 150 grit matt finishes externally and internally the kettle will be buffed to 220 grit mirror finish.

Optional Available:

Built In Stirrer Arrangement with Lifting and Lowering Device.
Steam Fittings with All Connections Factory Fitted.
Non Tilting Type With Bottom Discharge Models Are Also Available.
Capacities Available: From 10 Ltrs to 2000 Ltrs Capacity.

Functions:

Basically this unit is used for preparation of starch paste. Hemispherical shape ensures that the heating of the starch paste is uniform and gets more surface area. The tilting type arrangement ensures ease in unloading the paste into any container or vessel. The starch is put in the kettle and water is added till desired thickness is achieved. The kettle is jacketed and is heated till the starch melts and a thick paste is achieved. This paste can be agitated either manually or with the help of an anchor type agitator which will constantly stir the paste so that there will no lumps formation and proper mixing is achieved. Temperature can be set to desired temp by adjusting the thermostat provided and the temperature can be seen in the dial thermometer provided.
 

Salient Features:

Entire construction in Stainless steel
Semi hemispherical bowl ensure that entire bowl can be emptied by rotating the worm wheel.
Simplified construction enables ease of operation.
Steam or electric heating is possible depending upon the user requirements.
When used with stirrer / anchor the movement of anchor is forward and reverse using cyclic timer. Stirrer can be supplied at additional cost.

When supplied with stirrer, there is a top entry drive without using any "V" belt. Stirrer can also be removed for cleaning. Temperature indication is possible at additional cost.

Technical Details: :

Out Put

2,00,000 Tablet/Hour

Power Supply 220 volts, single phase ,50cs,1AMP
Passage Size 50 MM
Tablet Travel /Time 3000 MM distance for 20 to 60 seconds. (Depending on fluidity and vibrations)
Min / Max. Tablet Dia 5 mm / 40 mm
Extraction 80.250 M³/H at approx. 100 mm column of Rheostat
Dimension 360 mm dia. X 870 to 1040 mm Height.
Net Weight 30 Kgs.

Description / Specification of De Duster

We are involved in offering a wide range of De Duster to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  De Duster. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Salient Features:

Roll Compactor RC 200/50 & 200/75 are G.M.P models. Totally enclosed with SS304 cladding and framework ease of cleaning.Very Compact Design available in plain water-jacketed or flame proof model.
 

Screw is driven through variable drive safety sleeping clutch between gearbox and feed screw.
Rolls drive through twin shaft gear box with speed drive unit coupled to it using a flexible coupling which ensures synchronizations of the roll with a steady torque loading.
Feeding device and sealing of roll by means of check plates and all parts that are exposed to wear are made of hardened steel. The compacting head is two piece assemblies for easy dismantling.
Pre-densities screw comprises of cylinder or conical shape, which is well polished and made of AISI SS-304 quality material.
Compacting rolls sleeves are made out of tool steel, hardened to 55 HRC approx., & are keyed into shaft & thus protected against axial slipping by thrust plates & bolts.
The feed screw assembly can be hydraulically lifted by hand - operated hydraulic pump. This facilitates ease in cleaning.
Scrapper Assembly so designed to dismantle for ease of cleaning.
Pre-Compression chamber guides the powder without any slippage or leakage.
The main roll drive & feed screw are electrically interconnected.
All controls and indicators of the compactor are permanently built-in namely, on/off rolls, on/off feeds screw, main switch forward / reverse switch, ammeters for rolls & feed screw & emergency stop.

Technical Details: :

Model No.

200/50 GMP

200/75 GMP
Out/Put depending on the material to be compacted 20 to 60 Kgs/hour 30 to 100 Kgs/hour
Roll Size 200mm Dia x 50mm 200mm Dia x 75mm
Roll Speed (step pulley drive) 6 to 25 RPM 6 to 25 RPM
Feed Screw Speed. (variable speed drive) 10 to 60 RPM 10 to 60 RPM
Roll Drive Motor. 5 HP,960 RPM, 440
volts, 3phase, 50Hz 5 HP,960 RPM, 440
volts, 3phase, 50Hz
Feed Screw
Drive Motor. 1HP, 1440 rpm, 440
volts, 3 phase, 50Hz 1HP, 1440 rpm, 440
volts, 3 phase, 50Hz
Over all Dimensions mm 975 x 1150 x 1700 (H) 975 x 1150 x 1700 (H)

Salient Features:

Provided with stainless steel dust collection tray and inlet connectors.(This can be provided in M.S also for cost reduction)
Blower fan is dynamically balanced and the unit is with castor wheels.

Technical Details: :

Suction Capacity

150 CFM (250M³/HOUR)at 70mm W.G.

Filtration Area 9 Sq. Ft.(0.8m²)
Dust Storage Cap. ¾ Cu. Ft.(0.21M³)
Intel Connections 5 nos. of Dia 1½" (38.1mm)
Electrical Motor of 1 H.P,2800 RPM,440 V,50 CS, 3 Ph.
Dimensions 28 " X 19" X 32" (HT)
Net Weight (Approx) 80 Kgs.
 

Application:

Vibro separators are circular unitary gyratory screens used to separate mass composition of solids from solids, liquid from solid and for gradation of materials as per particle size, having a very wide range application. This is accomplished by vibrating the screens in three different planes along the vertical axis by means of a specially designed vibratory motor having off cantered weights at the top and bottom end of the motor shaft. The top weight causes vibration in the horizontal plane which causes the material to move across the screen towards the periphery. The lower weight acts to tilt the machine which causes vibration in the vertical tangential axis. The angle of lead of the lower weight with relation to the upper weight provides variable control of the screening pattern. Thus the material moves across the screens and also in the vertical and tangential planes enabling maximum screening.

"BHAGWATI" Vibro sifter are available with a wide range of possible screen sizes (mesh) Option for multiple deck separation is also possible. The unit consist of Specially designed vibratory motor to run on 400/440V, suitable HP, 3 phase, 50 cycles electric supply ,with adjustable eccentric weights at the top and bottom of the motor shafts mounted vertically at the center of the base plate of screening unit. Screening unit consists of SS 304 screen sandwiched between SS 304 hopper and bowl with the help of special clamp with gasket. This in turn is clamped to the base plate. Rugged Springs placed over the circular motor base amplify the vibration and at the same time restrict the vibration from being transferred to the floor.

Technical Details: :

Model No.

SBVS-20

SBVS-30 SBVS-36 SBVS-48 SBVS-60
Output kg / hour 50 to 200 75 to 300 100 to 400 125 to 500 150 to 800
Screen Diameter 500 mm 750 mm 915 mm 1220 mm 1524 mm
Charging height 1190 mm 1190 mm 1190 mm 1330 mm 1250 mm
Discharging height 750 mm 750 mm 750 mm 700 mm 740 mm
Electric Power hp/kw 0.5 / 0.3 0.5 / 0.3 0.5 / 0.3 1 / 0.75 2 / 1.5

Note: Dimensions & Technical Details are subject to change as per customers' requirement without any further notice.

Application:

Pan: SS 316 semi ellipsoidal size pan with a circular mouth for charging & discharging of tablets Pan mounted at an inclination of 45 degrees to the horizontal.
Drive Assembly: Consists of a suitable 1 HP 3 Phase, 440 V, and 1440-RPM TEFC motor with suitable worm reduction gearbox and cone pulley arrangement to give three-speed output.
Hot Air Blower: The unit is provided with a hot air blower consisting of suitable HP 3 Phase 440 V, 2880-RPM TEFC electric motor & centrifugal blower with damper delivering required CFM. The air is heated by means of suitable electric heater to give air at 30 to 90 degrees Heater with thermostat control and flexible hose pipe.
Control Panel: Unit provided with suitable control panel with starters and push button to actuate the drive and for blower The circuits consists of MCCBs, relays and contractors in series Ample overload protection is provided by the MCCB and the relay Wires coming out of the connections are numbered for easy recognition
Mounting: The motor and gearbox is mounted inside sturdy MS frame and the pan mounted on the Gearing housing fitted in the stand. Blower mounted by the side of the stand or placed in remote location if required.
Finish: All joints argon Arc welded and all SS Parts polished to suitable finished required of pharmaceutical equipment MS parts painted to smooth finish.
Options Available
a.Unit with FLP motors and FLP push button station but non FLP panel to be mounted outside FLP area. b. Steam heating for blower.

Technical Details: :

Model No.

SBCP-24"

SBCP-36" SBCP-48" SBCP-72"
Loading capacity 25 Kgs 60 -80 Kgs 100-120 Kgs 200-250 Kgs
Drive Motor HP 3 PH 50 C S 415 V AC line 0.5 HP 1.00 HP 2.00 Hp 7.5 HP
RPM of Pan (empty) 12/24 12 / 36 10 / 30 5 /10
Hot air blower motor HP 3 PH 50 C/S 415 V AC line 0.50 0.50 1.00 1.00
Blower capacity Maximum CFM 100 200 500 750
Heater KW 1.5 Kw 3 Kw 4.5 Kw 6 Kw

Description:

Planetary Mixer: This equipment is basically a mixing assembly where the agitation pattern is of the planetary nature the beater or the agitation assembly rotate around itself as well as travel in a circle in the bowl thereby achieving intimate mixing. Because of special design feature of shifting the mass is uniformly and intimately mixed. The unit consists of Bowl SS Cylindrical bowl with spherical dished bottom with inside surface polished to smooth finish. MS Jacket on cylindrical and spherical area to operated on 3 Kg / cm sq. Steam pressure Complete with steam inlet and cold water inlet and outlet connections with standard fitting like pressure gauge, vent cock, release valve and drain. Bowl also suitable for vacuum application and fitted with 3 nos. Of castor wheel, two fixed and one swivel type. Suitable locking lugs for fixing bowl to the machine. 

Top Dish: SS top dish for covering the bowl with SS flange having groove for fixing the sealing gasket. Necessary connection with serrated nozzle provided for connecting flexible pipe for vacuum application Light and sight glasses suitably provided. 
 

Agitator Assembly:

1 / 2 No/s. Of SS open type Beaters.
1 No. SS Scrapper fitted with PTFE strip on both sides.
1 No. centrally located High Shear Emulsifier. (optional)

Agitator Assembly:

1 / 2 No/s. Of SS open type Beaters.
1 No. SS Scrapper fitted with PTFE strip on both sides.
1 No. centrally located High Shear Emulsifier. (optional)

Drive Mechanism for Beater:

Suitable HP 1440/2880 RPM DUAL Sped TEFC Motor to work on 415 V, 50 c/s 3 Phase AC supply line, mounted on MS plate.
Worm reduction gear box coupled to the motor through belt and pulley arrangement.
Epicyclical gear box coupled to the motor through belt and EPICYCLIC gear train arrangement to achieve planetary motion.
Suitable HP 1440 RPM TEFC motor to work on 415V 3 phase 50 C/s AC supplies line for High Shear Emulsifier. (Optional)
The above items are assembled on the top plate which is supported on a Cast iron sliding sleeve with MS gussets.

Main Body: MS column with flange mounted on stool base 2 nos limit switches provided at upper and lower limits of the column to control traverse of the sleeve.

Lifting Arrangement of the Drive Assembly (Mechanical):

Consist of 

Suitable HP, 1440 RPM motor working on 415V 50 c/s 3 Phase AC supply line.
Worm reduction gear box coupled to the motor through belt and pulley arrangement.
MS STOOL for mounting the reduction gear unit.

Lead screw and guide bar to guide up and down traverse of the drive assembly.

Lifting Arrangement Hydraulic:

Horse shoe base with suitable gun metal bush housing for 3nos chrome plated guide bars with suitable retaining plate and supports.
Hydraulic Power pack assembly complete with Tank, suitable HP pump with filter connected to suitable solenoid valve arrangement with control and check valve for preventing drop age of pressurized fluid.
Power Pack connected with fixed / flexible high pressure inter connecting hose to hydraulic cylinder of suitable lift clamped to the drive head to give smooth up and down traverse.
Limit switch for controlling up and down traverse motion.

Control Panel:

Air break DOL dual speed starter with DOL relay for main motor.
HRC back up fuses.
Ammeters for main motor and lift motor.
Push Button actuator for above operation fitted on control panel.
The circuits consist of MCBS, relays and contactor is series. Ample overload protection is provided by The MCBs and the relay.
Wires coming out of the connections are numbered for easy recognition.
Finish All SS parts polished to smooth pharmaceutical finish. All MS part painted to smooth finish.

Options Available:

Unit with FLP motors and FLP push button station but non FLP panel to be mounted outside FLP area

Jacketed bowl for steam / electrical heating

Description:

We offer heavy duty Mass Mixer that is mainly used for the purpose of homogeneous mixing of different substances or materials. The Industrial Mass Mixer that we supply in the market is effectively used for mixing various kinds of thick and heavy materials. The safety gland of the Powder Mass Mixer prevents ingress of external powder into the trough and it also guard against any kind of leakage. In addition to this, these mixers are very endurable and easy to operate. Further, the company is counted as a major mass mixer Manufacturer and one of the prime Suppliers in the market.

Shell: Consisting of 'U' trough of suitable dimensions. Construction of S.S. and side plates duly M.S. stiffened from outside and from inside with S.S.

Mixing Mechanism: Paddle type blades welded to the main shaft provide for efficient mixing of thick heavy material. PTFE gland mechanism provided at shaft ends prevents ingress of external powder into the trough and prevents leakage.

Charging: From the top charging can be done through a hinge able lid, hopper or Nozzle can be provided for additional spraying of additives.

Discharge: By bottom discharge slide Iris or Butterfly valve of suitable diameter, for regulated discharge.

Drive: Consisting of suitable H.P. TEFC 3 phase ac 415v / 50 cycles motor coupled to suitable worm gear, with driving shafts mounted on suitable Plummer block. Mounting: Mounted on suitable ISMC Section Stand, with protective covers for belts and couplings.

MOC: All contact parts in S.S. Constructions. Complete unit with S.S. cover and all surfaces polished to mirror dull finish. MS parts dull painted to smooth finish.
 

Salient Features:

All contact parts can be easily and quickly dismantled and cleaned.
Machine is designed for continuous operation.
Cylindrical screen for higher output.
Flame proof electrical can be provided at extra cost.

Technical Details: :

Model No. SBMM-50 SBMM-100 SBMM-150 SBMM-200 SBMM-300
Working Capacity-KG (Considering bulk density 0.97 gm/cc) 110 Ltr. 220 Ltr. 330 Ltr. 440 Ltr. 560 Ltr.s
speed of Stirrer 35 RPM 35 RPM 30 RPM 25 RPM 20 RPM
Electrical Motor 3hp / 2.2Kw / 144RPM / 415v / 50 Hz / 3phase 5 hp / 3.7 kw / 144 RPM / 415v /50 Hz / 3 phase 7.5hp / 5.5 kw / 144 RPM / 415v / 50Hz / 3phase 10 hp / 5.5kw / 144RPM / 415v / 50 Hz / 3 phase

15hp/7.4kw/144

RPM/415v/50Hz / 3phase
Over all dimensions in MM 1900x950x1150 1900x950x1150 2350x1000x1500 2475x1000x1500 2650x1050x1600
Net Weight in kgs. 350 Kgs 450 Kgs 550 Kgs 600 Kgs 700 Kgs
Gross weight in kgs 450 Kgs 600 Kgs 750 Kgs 850 Kgs 1000 Kgs

Silent Features :

All Contact Parts Made Out of SS 316 / SS 316 L Quality Material Conforming to cGMP norms.
All pipelines are electro - polish from inside and joints are easy openable & fitting after cleaning.
Complete Lid lifting arrangement to facilitate cleaning and product change over, interlocked with safety device so that anchor stirrer starts onllllly when lid closed.
Intensive mixing by special smi - contra design anchor stirrer avoiding dead zones. Contra Rotary Stirrer for Tooth Paste.
Variable Speed drive provided for main anchorstirrer asembly for different speeds.
All transfer are done under vacuum to avoid any hand touch & Contamination. (Complete untouched process).
Bottom Entry angular homogenizer provided to ensure proper emulsification & homogenization of the product.
Forced homogenization in the mixing vessel or upon emptying.
Bottom homogeniser is provided with double cartridge mechanical seal with TC/TC seal face, with cooling water arrangement for the mechanical seal and water detection sensor to trip the motor if the fow of water to the mechanical seal is stopped, ensuring thorough safety of the seal due to its high speed application.
Inspection glass illumination.
Specially Designed inline filters provided to ensure proper filteration.
Transfer (Lobe) pump provided to transfer ready product from main mfg.Vessel to storage or filling area.
Digital metering pump provided for transrring exact volume of cream from storage vessel to hopper of tube filling packaging machine.
Pressure and vacuum tight mixing vessel.Full operation through single control panel.
Documentation: DQ / IQ / PQ / OQ provided.
PlC based control control panel with graphics and colour touch screen display for process automation. (optional)
SCADA SYSTEM can also be provided (Optional)
Load cell for online weighing.(optional). FLP motor with FLP push botton station (Optional)
Product Recovery System : for recovering final product from pipelines and helps in easy cleaning. (Optional)

Description:

For Toothpaste Manufacturing Plant 

TOOTHPASTE MANUFACTURING MIXER consists of a Main Manufacturing Vessel also known as Contra Mixer. Contra Mixer as the name suggest works on the principle of Contra rotation of Blades for simultaneous beating and scraping operation. The mixer is highly versatile and mostly used for manufacturing Tooth Paste, Creams, Cosmetics and other viscous products. 

The Mixing Assembly consists of series of paddle type blades of appropriate shape to move the material back towards the centre of the container. The paddle type blades are provided on the central shaft which runs through a hollow shaft on which other sets of blades are welded. Both the sets of blades intermeshes with each other and rotates in clockwise and anti-clockwise direction respectively and one sets also scraps the container wall for thorough and uniform mixing of the material.

The mixer is so designed to withstand high vacuum applied during the process for optimum mixing. Contra Mixer is provided with a jacket for cooling or heating as per the application. The vessel shall have a shell of suitable thickness with a hemispherical bottom and flanged top dish made out of S.S. 316 plate. The vessel shall be jacketed with MS jacket ( SS304 jacket provided on extra cost on demand, if required ) of suitable with stiffeners suitable for steam pressure of 4 to 5 Kg/cm2. The jacket shall be insulated with 50 mm thick glass wool insulation and shall be cladded with 16 SWG M.S. or SS304 material. The vessel shall be suitable for 600 to 700 mm of Hg vacuum and internal pressure of 3 Kgs / cm2. The top lid of the Mixer m/c shall be provided with hydraulic lifting and lowering arrangement, if required. Hydraulic arrangement will consist of : ( Optional at extra cost )
 

Hard Crome plated HYDRAULIC CYLINDERS ( 2 Nos. )
Limit switches at upper and lower limits
Power pack with direction control valve by actuated

Salient Features:

All contact parts are made out of SS 304 / SS 316 quality material.
Compact design requires comparatively smaller floor space.
Product container mounted on mounting lugs or legs as required by customer.
Hydraulic power pack with cylinders are provided for lowering and lifting movement of top cover with stirrer's drive assembly.
Lowering and lifting movement of drive assembly will be achieved through hydraulic lifting system for easy of cleaning and changeover of products. (OPTIONAL - Provided On Demand)
Fixed product container for safe operation during mixing.
Product container having hemispherical shape bottom.
As stirrer is a top driven and sealing doesn't comes in contact with product, there isn't any black particle contamination problem.
Steam circulation jacket for mixing bowl, to heat the product during operation & water circulation facility to cool the product during or after mixing. ( made out of mild steel or SS304, as per customer requirement)
All Non contact parts (general structure) made out of mild steel (SS304 provided on demand, on extra cost) and claded with SS304 or crome plated or made out of SS304 in GMP Model. Contact parts are polished to the mirror finished and noncontact parts are polished to the matt finished in GMP Model. All safety guards & covers made out of SS304 material in GMP model & made out of mild steel & painted in standard model.
General structure & all non contact parts are made out of Mild Steel & same will painted in Standard Model.
Digital temperature indicator provided to indicate the temperature of the product. (Temperature controller for steam heating is not in our scope of supply.)

Special Features :

Machine design as per the vacuum application for de-airation of mixing container, to remove air bubbles from the product during mixing for GEL products. ( Vacuum System) vacuum pump is not in our scope of supply.
Insulation will be provided on jacket of container. The insulation will be covered with M.S. material in standard model and SS304 material in GMP model.
Material discharge from bottom. Flush bottom valve provided for material discharge.
M/C provided with Light glass, Sight glass, material inlet, water inlet, steam & washing water inlet, air suction valve for vacuum, vacuum gauge etc...
Mixing assembly have two speed facility. Variable speed drive facility for mixing assembly will be provided on extra cost, as a OPTIONAL facility.
Digital Timer for Batch time setting.
Ampere Meter for main motor.

Optional :

"PLC" based operating panel for automation.
Variable speed drive for main motor for variable rpm of mixing assembly.
Online sampling port to take sample of product during mixing.
Inline homoginizer or Colloid Mill.

Description :

The Ointment Manufacturing Plants are ideal tools for the pharmaceutical & cosmetic industries for the production of Ointment, Cream, Lotions, Tooth Paste & other emulsions & homogenizations.It is specially designed to take care of two critical factors which directly affects the quality of the Ointment / Creams.
 

Minimum man handling of Ointment.
Negligible vacuum drop during mixing & blending.

Needless to say, it also provides the benefits of the effective manpower utilization.

SPM Ointment Plant Consist the Following Equipments and Accessories.

Manufacturing Vessel
Wax Phase Vessel
Water Phase Vessel
Storage Vessel
Vacuum Pump
Control Panel
Product Piping
Working Platform
Material Transfer Pump to Transfer material from manufacturing Vessel to Storage Vessel & Storage Vessel to Ointment ( Tube ) Filling M/C.
This system consist of a closed circuit manufacturing facility from feeding of Wax / Water Phase to loading the hopper of filling machine.
The Wax and Water at required temperature are transferred to Manufacturing Vessel or Planetory Mixer, by vacuum through conical filter.
The product during emulsion formation is recirculated through Ointment Transfer Pump The Pump also discharges the product in the Storage Vessel.
The Storage Vessel is then taken to the filling area and is connected to again Ointment Transfer Pump. Or Storage Vessel remain fixed ( In bigger size ) & pump transfer the ointments in the hopper of the Ointment Filling Machine.
The entire Plant can be operated by centralised operating panel by one operator.
The plant is equipped with an electrical control panel with digital temperature indicators and digital timers.
Minimum two batches per shift of the same product can be assured in this plant.
This plant conforms to CGMP standards (Paint Free Construction).
Encosed are a few pages explaining the system in detail. In case of any queries feel free to contact us.

Silent Features :

The Plant is designed to be operated only by one operator and one helper.
All material transfers are done by vacuum or by transfer pumps.
All the vessels are CGMP (paint free construction)
The gaskets used are of silicon (food grade).
All contact parts are of S.S. 304 quality material (SS316 provided on demand) & finished to class 4B (Mirror) finish and are crevice free.
The entry of all agitators are from top & High Speed Emulsifier from bottom or In-line Emulsifier ( as per customer choice ).
All vessels are suitable for internal pressure of 1 Kg. / Sq. cm. and hence can be sterilized.
All pipes, pipe fittings and valves are of SS304 / SS316 ( as per customer requirement ) seamless quality, internally electro polished, with tri-clover ended joints.
The entire plant is equipped with CIP & SIP connections, so that customer can use these facility, if have CIP & SIP equipment.
All values of temperature & time of the plant are indicated digitally on the control panel. Ampere indicates on Ampere meters.
A micro processor based automatic operating plant can be designed as per requirement.
All the inlet & outlet connections are provided with tri clover joints, which are very easy for cleaning & replacement

Salient Features

Works on positive displacement principle.
Fill accuracy : + 98.8 %.
Usefull in filling paste, lotion, cream, balm, gums, etc.
Accurate tail cutting arrangement.
Beltless stirring device with vary speed controller.
Unique No jar - No fill device.
Output upto 20 - 30 jars/minute.
Can fill from 3 Grams to 500 Grams with change parts.
GMP model contact parts SS 304 / SS 316 (As per customer requirement).
Power consumption 0.75 HP, 230 Volts / 415 Volts.
Overload clutch protection is provided to make the operation fool proof.

Salient Features

Hot air tool for proven hot air blowing mechanism.
Fully pnuematic and 95% maintenance free.
Tube holders are of spring loaded type to take care of any tube diameter variation.
Fill accuracy : + 98.8 %.
Usefull in filling paste, lotion, cream, balm, gums, etc.
Accurate tail cutting arrangement.
Audio visual alarm for any abnormal conditions of the machine.
Unique No Tube - No fill device.
Output upto 50 - 55 Tubes/minute.
Can fill from 3 Grams to 500 Grams with change parts.
GMP model contact parts SS 304 / SS 316 (As per customer requirement).
Power consumption 0.75 HP, 230 Volts / 415 Volts.
Overload clutch protection is provided to make the operation fool proof.
Production counter with memory to indicate the number of filled tubes.
Tube orientation device incorporating photo sensors and stepper motor and controller. (optional)
Automatic cream level sensing device. (optional)

Semi-Auto hand operated Tube Filling Machine

Easy to operate
Easy to clean
20-25 Tubes per minute

Salient Features

Hot air tool for proven hot air blowing mechanism.
Fully pnuematic and 95% maintenance free.
No need of costlier spares as in the case of ultrasonic sealing machines with heaters.
Fill accuracy : + 98.8 %.
Usefull in filling paste, lotion, cream, balm, gums, etc.
Accurate tail cutting arrangement.
Audio visual alarm for any abnormal conditions of the machine.
Unique No Tube - No fill device.
Output upto 22 - 55 Tubes/minute.
Can fill from 3 Grams to 500 Grams with change parts.
GMP model contact parts SS 304 / SS 316 (As per customer requirement).
Power consumption 0.75 HP, 230 Volts / 415 Volts.
Overload clutch protection is provided to make the operation fool proof.
Production counter with memory to indicate the number of filled tubes.

Description / Specification of Automatic Ointment And Cream Manufacturing Plantm

We are involved in offering a wide range of Automatic Ointment And Cream Manufacturing Plantm to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Automatic Ointment And Cream Manufacturing Plantm. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description:

No Tube No Fill device (material will not discharge from hoper, when there is no tube on filling station).
Machine is provided with S. S. Hopper with electrical jacketed, with thermostatic control to keep the material hot, while filling for a smooth flow of material while filling in the tubes.
Machine is provided with stirring device, so that no active ingredients in the material cannot stick to the inner wall of hopper, which contains your material.
Ours is the only from India, which is suitable for filling, sealing coding of Aluminum tube as well as plastic LAMI tubes by changing over the sealing device.
Machine is supplied with all contact parts made of S. S. 16 material.
Relay electrical control system with operating panel with start, stop, inch.
25 - 30 Liter capacity container, acid proof.
Motor with variable speed.

Size parts for one tube size and one filling products:

Tube holder of Aluminum / Nylon

Pump unit stainless steel for filling volume choose alternately any one A : 1 - 5 ml to 10 ml

B : 2 - 50 ml

C : 3 - 100 ml

Technical Details:

Speed 40 to 60 tubes/min filling capacity
Volume 5 ml to 100 ml
Tube Size Dia 12 min to 25 max
Tube Size Length 50 min to 200 max
Power Consumption 2.5 Kw. Max.
Size 1450 (B) x 1150 (D) x 1750 (H)
Net Weight Approx 285 Kgs
Gross Weight Approx 515 Kgs

Note: Dimensions & Technical Details are subject to change as per customers' requirement without any further notice

Description:

The team of Bhagwati has implemented its endless efforts for the improvement of press tool for tabletting machines. There is a vast development in the design and technique of making punches and dies. These punches and dies are made of hard core alloys ensuring their best suitability for pharmaceutical and chemical industrial conditions. They have the ability to improve the quality of tablets with respect to their external form. 

At present most of the pharmaceutical and chemical industries are not having a specialized undertaking that would ensure their requirement of standard punches and dies. We studied the requirements of both domestic and foreign industries and succeeded in providing ideal pressing tool machinery accordingly.

Description:

Granulator equipment is generally used to render powders to a specific form that facilitates their flow ability and handling. We offer typical granulator machine for cosmetic, spices and pharmaceutical industries to formulate several ingredients like powdered incipient, small amounts of active ingredients and the liquid binder that locks the powder as granules to prevent segregation. In general pharmaceutical industries require separate equipments to pre-disperse, blend and to granulate various powders, but all these problems can be solved with our multi step granulator machine. 

Bhagwati Machines Pvt. Ltd. in India offer efficient reciprocating type new mixing granulator, which is suitable for granulating both the dry and wet materials.

Salient Features :

Efficient reciprocating type Granulator. It is suitable for granulating dry and wet materials.
It is quiet in operation and robust and durable in design.
A totally enclosed gearbox is mounted on a base pillar at a convenient height.
All gearing is enclosed in oil bath. No grease or other external lubrication is required.
Hopper, the granulating blades both for dry and wet, sieves and all other parts which come in contact with the material to be granulated are made from stainless steel.
Separate stirrers for dry and wet granulations are provided and they are so designed that the efficiency of granulation process is optimized in each case. The stirrers can also be replaced quickly and easily.
A simple and positive arrangement of holding and tensioning of the screen is provided. The arrangement is such that the screen remains stretched throughout the operation and very close and uniform gap is maintained. Thus, it produces better excessive wear on both stirrer and the mesh.
Even there is a good saving on the cost of the stainless steel sieve, as the cut size of the sieve to fit
to the machine is smaller than that required for other machine.
All the parts working on the materials being granulated can be easily and quickly dismantled for through washing without the use of spanners.
Lower Guard of polished Stainless Steel & Upper Guards of Acrylic Material.

Technical Details: :

Granulator Machine
 

Machine Type Bhagwati ACRA-GRA-8
Bhagwati ACRA-GRA-12
Hopper Size 8" (200 mm) 12" (300 mm)
Electric Motor 
1.H.P., 1440 R.P.M.,
440 V., 3 Phase,
50 Cycles, A.C. 1.H.P., 1440 R.P.M.,
440 V., 3 Phase,
50 Cycles, A.C.
Output
200 Kgs/ hr.(Output depends upon size of granules and type of material)
200 Kgs/ hr.(Output depends upon size of granules and type of material)
Overall Dimensions(cm) 
46 W x 770 D x 123 H
60 W x 109 D x 150 H
Case 
Dimensions (sm)
66 x 92 x 165 H
91.5 x 145 x 178 H
Net weight 250 kgs. 500 kgs.
Gross weight 370 kgs. 620 kgs.

Note : Specification and features of the machineries are subject to change without any prior notice

Description:

We manufacture tablet coating machine basing on the GMP standards. Tablet coating machine is especially designed for film coating of oral solid dosage forms at controlled atmosphere in pharmaceutical industries ensuring user friendly operation. Benefits of our tablet coating equipment include effective mixing of final product bed, lowering emission of organic solvents, long term performance, automatic emptying and many more.

Salient Features :

Specially designed Hopper.

Compact vibratory design for high for high speed & dust free sieving.

Noiseless and maintenance free machine.

All contact parts and screen made of SS 304 (SS 316 optional)

Low power consumption compared to reciprocating vibratory system.

Easy dismantling and cleaning of contact parts.

Machine available with flame proof and double / triple deck options.

All contact parts can be easily washed and / or sterilized.

Machine in fitted with the castor wheels for easy mobility

Technical Details: :

Tablet Coating Machine

Machine Type Bhagwati 
- ACM-30" 
Bhagwati 
- ACM-36" Bhagwati 
- ACM-42" Bhagwati 
- ACM-48" Bhagwati 
-ACM-60"
Coating Pan Size
30 " DIA 36" DIA 42" DIA 48" DIA 60 " DIA
Volumetric Cap.
45 ltrs 75 ltrs 125 ltrs 185 ltrs 300 ltrs
Speed 15 - 31 RPM
Main Drive Motor 
1.5 KW/ 2 H.P. ,960 RPM ,3 Phase , 415 Volts, 50 Hz.
Blower Motor 0.75 KW/ 1 H.P., 2800 RPM, 3 Phase, 415 Volts, 50 Hz.
Electric Heater 1.5 KW 1.5 KW 1.5 KW 3 KW 3 KW

Note : Specification and features of the machineries are subject to change without any prior notice

Description:

Global leading pharmaceutical machines manufacturing company in India, Bhagwati Machines India Pvt. Ltd, offer sifter machine which is ideal for sieving, grading and straining of tablets. Tablet shifter machine is specially developed upon the GMP standards for separation of solids / liquids from each other and for production of graded materials in proportion to their sizes. The ideal feature of our hi-speed sifter machines is to provide gyratory vibration. Additional features include portability, power consumption, flame proof material, explosion proof and many more.

Salient Features :

Available in two models providing screening diameters of 500 mm and 750 mm.

Portable – fitted with sturdy castors and occupies little space.

Electric power requirement less than other machine of the kind. Power requirement are very much lower than units utilising reciprocating system.

Standard units provided with TEFC motors operating on 440 Volts 3 phase supply. Flame proof motor fitted on request.

Easy to install. Requires minimum maintenance.

Double and triple deck screens with out-let and hopper for bottom deck available on request.

Easy dismantling and cleaning of screen.

All contact parts and screens of stainless steel.

Application :

Chemicals, Pharmaceuticals, Dyestuff and colours, Food products, soaps and detergents Cosmetics, pesticides and fertilizers, Paper and paper products and Scrap recovery, Resin, Paints, Polysters, Minerals, Fruit juice, China Clay, Rubber compounds, Fillers, Straining syrups, Suspended impurities from liquids & oils on continuous use, Cheese, Metal powders, Liquid glazed clay, Animal feed etc.

Technical Details: :

Sifter Machine Mechanical Sifter Machine , sieving, frading & strainging
 

Machine Type Bhagwati - CSGS / 500 Bhagwati - CSGS / 750
Motor
1.5 HP, 1440 RPM, 
415 VOLS, 3 phase, 50 Hz. 1.5 HP, 1440 RPM, 
415 VOLS, 3 phase, 50 Hz.
Screens
54,000 TO 1,29,000 54,000 TO 1,29,000
Screens dia
510 mm
750 mm
Charging ht.
1080 mm approx
1100 mm approx
Discharging ht.
770 mm approx
770 mm approx
Overaall Dimensions (cm) 100 W x 100 D x 110 H 100 W x 100 D x 110 H
Net weight 325 kg. 325 kg.
Case Dimensions (cm) 135 x 135 x 140 H 135 x 135 x 140 H
Gross Weight 500 kg 525 kg

Note : Specification and features of the machineries are subject to change without any prior notice

Description:

Bhagwati Machines Pvt. Ltd. in India offer pharmaceutical multi mill machine: a self contained portable unit that is useful for multiple purpose formulations. Our industrial multimill can be used as high speed granulating mill, pulvirizer, mider, shredder, chopper etc. A wide range of wet and dry drug materials can be added to this industrial machine without any special attachments. Multi mill tablet machine works on the principle of size reduction with variable force swing hammer blades and with a selected screen to control reduction.

Salient Features :

Compact & elegant, well prooven design.
Vibro type & G.M.P. model
Noiseless & Maintenance free unit.
Electric power required less.
All contact parts made of S.S. 304. (SS 316 optionally)
All contact parts can be easily washed and / or sterilized.
Tablet conveying route is geometrically designed, for De-burring.
Efficient de-burring & de-dusting and full suction of excess powder.
Machine can be equipped with additional brushing unit also. (optionally)
Machine in fitted with the castor wheels for easy mobility

Technical Details: :

Multimill 
 

Machine Type Bhagwati - MM - 200
Out put 50 Kgs To 200 Kgs/hour
Rotor assembly dia 250 mm (approx)
Rotor speed 750 / 1500 / 2300 / 3000 r.p.m.
Beaters 12 knife & impact edges & 2 scrapper blades
Screen dimensions Iinner diameter-260 mm, ht-135 mm
Motor TEFC, 3 h.p., 1440 .p.m., 440 v., 
50 cs, 3 hp, a.c. supply
Starter "Dol" with reversible switch
Material charging height 1445 mm (Approx)
Overall Dimensions (mm) 870 x 965 x 1630 mm Ht.
Net Weight 275 Kgs. (approx)
Gross weight 425 kgs. (approx)
Case dimension (mm) 1200 mm x 1550 mm x 1860 mm (ht)
Note : Specification and features of the machineries are subject to change without any prior notice

Description:

We offer plain and water jacketed type communting mill for pharmaceutical, food and chemical applications. Communiting mill is used to reduce the size of granules. It is equipped with a rotor and sharp blades which rotates in horizontal axis. Our engineers are particular in promoting the quality of our pharmaceutical machines. Simplified machine design, robust construction, 100 percent stainless steel brackets and thrust bearings are some of the features of communiting mill ensuring the quality maintained by our team.

Salient Features :

GMP point of view machine is provided with S.S. cladding on base, S.S. belt guards, S.S. cover on motor. No exposed painted surface on top of the machine. Motor rails, screws and guide rods are chrome plated.
Beaters assembly is in a separate pillow blocks for ease in maintenance. Very less down time, as only beaters assembly will have to be reversed (and not the complete chamber) for making it knife to impact forward or vice-versa which can be done by operator.
Swing type beaters assembly is provided as a standard supply, which increases the output by 10 to 30% and is easy to clean.
Beaters and shaft are of HCHC quality and beaters are further hardened and hard chrome plated. Beaters are fitted on a splined shaft.
Transmission of heat to the chamber from the bearings is minimum as they are away in separate pillow blocks. This facilitates to some extent in processing of heat sensitive products.
Beaters assembly is dynamically balanced which reduces vibration and noise level and increases bearing life.
Castors are provided for mobility and brakes can be applied for fixing machine at one place.
Machine is available in Plain & Water jacketed model. Flameproof electricals can be provided on demand at extra cost.

Technical Details: :

Machine Type Bhagwati - CM
Rotor Speed 1000-2250-4500 rpm.
Blades Swinging type with knife and impact edge
Screens 1. Round hole perforated stainless steel sheet.
Electric motor 7.5 hp., 1440 RPM, 440 V., 50 Hz., 3 Phase.
Overall Dimensions (mm) 69 (I) X 127 (W) X 170 cm (H)
Net Weight (Approx) 310 KGS.
Output (kg / hour) 25 to 300 (Varies according to product, rotor speed & screen)

Note : Specification and features of the machineries are subject to change without any prior notice

Description:

Manufacturer, supplier and exporter of Pharma Machines including dust extractor machine for collecting loose powder or dust from the polishing chamber. Our dust extractor unit is used to control the flying dust that is automatically generated during the compression of tablets. We assure the BHAGWATIcy of our dust extractor machine in its application. It is also used for various stages of cleaning operations when coupled with tabletting machine and automatic capsule filling machine.

Controlling dust hazards and cross contamination at tablet compression, reducing mechanical strain and balanced air blowing system are some of the ideal features of our dust extraction machine.

Salient Features :

Provided with stainless steel S.S 304 contact parts (SS 316 – optionally)
Blower fan is dynamically balanced.
Machine in fitted with the castor wheels for easy mobility.
Overcome dust hazards as well as cross contamination at tablet compression.
Minimizes mechanical strain, excessive wear of tableting machine – resulting in minimum machine breakdowns and punch wears.
All inlet manifolds and dust collection trays are of S.S. 304
Inlet manifolds facilitate to connect any Tablet press machine and De-burring units.

Technical Details: :

Dust Extractor
 

Machine Type Bhagwati - DE - 150
Suction Capacity 150 C.F.M. (250 m0 . hr.) at 70 mm W.G.
Filteration Area 9 sq. ft. (0.8 m2)
Dust Storage Capacity 3/4 cu. Ft. (0.021 m2)
Inlet Connection 3 Nos. of Dia 1.1/2" (38.1)
Power 1 HP / 2800 RPM / 3 Phase / 440 V / 50 Hz
Overall Dimensions 28" (I) X 19" (W) X 32" (H)
Case Dimensions 35" (I) x 29" (W) x 40" (H)
Net Weight 80 Kgs.
Gross weight 100 Kgs.

Dust Extractor
 

Machine Type Bhagwati - DE - 300
Suction Capacity 300 C.F.M. (500 m3 / hr) at 125 mm W.G.
Filteration Area 1.343 m2
Dust Storage Capacity 40 Lts.
Inlet Manifolds (Six) Dia 50 mm – 02 Nos.
Dia 38 mm – 4 Nos.
Power 2 HP / 2880 RPM / 3 Phase / 440 V / 50 Hz
Overall Dimensions 620 x 780 x 1270 H
Case Dimensions 790 x 990 x 1670 H
Net Weight 130 Kgs.
Gross weight 200 Kgs.
Note : Specification and features of the machineries are subject to change without any prior notice

Description:

Bhagwati De Burring and De Dusting Machine have two main functions: Tablet de-dusting and tablet cleaning through compressed air. De Burring and De Dusting Pharma Machine can be equipped with rotary tablet press machine. It is an ideal pharma machine for fine de-dusting of tablets and for upward movement of tablets with automatic dust removing system.

Easy cleaning, low maintenance, high efficiency and low power consumption are some of the ideal features of our De Burring and De Dusting Machine.

Salient Features :

Compact & elegant, well prooven design.
Vibro type & G.M.P. model
Noiseless & Maintenance free unit.
Electric power required less.
All contact parts made of S.S. 304. (SS 316 optionally)
All contact parts can be easily washed and / or sterilized.
Tablet conveying route is geometrically designed, for De-burring.
Efficient de-burring & de-dusting and full suction of excess powder.
Machine can be equipped with additional brushing unit also. (optionally)
Machine in fitted with the castor wheels for easy mobility

Technical Details: :

De-Burning De-Dusting Machine
 

Machine Type Bhagwati - DB - 300
Out-put (for 8 MM tablet) 5,000 to 2,50,000 tab / hr.
Power 0.25 HP / 3 Phase / 1440 RPM / 
440 V / 50 Hz
Max.Tablet Dia 25 mm
Min.Tablet Dia 5 mm
Overall Dimensions 400 mm (I) 400 mm (W) X 800 mm (h)
Note : Specification and features of the machineries are subject to change without any prior notice

Description :

For over a quarter of a Century, Shree Bhagwati Machtech India Pvt. Ltd have been supplying stainless steel tanks and process equipment to the brewing, beverage, food, waste, pharmaceutical and chemical industries. We also supply mild steel tanks.

we handle the increasing demand for high quality stainless steel storage and process vessels from a wide range of industries – each with its ownrequirements.

Shree Bhagwati Machtech India Pvt. Ltd manufactures STORAGE Vessels from 50 litres to 180,000 litres which can be used for various applications, with the following accessories/attachments.
 

Jacket for heating/chilling/maintaining the temperature of the product within the vessel
Electrical trace heating of the vessel to maintain product temperatures
Cladding in either stainless steel (welded or riveted) or riveted aluminum to maintain internal temperatures
Attaching a mixer/high shear blending unit to the vessel
Ensuring that the vessel is suitable for CIP, including spray balls etc.

All our new vessels are designed to meet industry standards - such as ASME VIII, Div 1 and Good Engineering Practices - and are supported by manufacturing drawings that we submit for approval to the relevant parties. We also work to our fully documented quality assurance system to ensure that the finished product reflects the customer's required parameters and is of superior quality. 

We always supply a documentation package containing manufacturing methods, material certificates and outside inspection, where applicable.

We manufacture vessels used in industries such as brewing, pharmaceutical, chemical and food, so our stock range will suit most customer requirements. Different types of storage vessels:- 
 

Bulk storage vessels (stainless steel / mild steel)
Mixing vessels
Fermentation vessels
Powder silos
Bright beer tanks
Process vessels
Cellar tanks
Micro breweries
Brew houses
Horizontal vessels

Storage vessels/tanks are simple vessels used for storing liquids, solutions or pharmaceutical raw material and other chemicals. These general purpose vessels are made of stainless steel, fibre glass, titanium, galvanized steel etc. and are used by a number of industries to store various substances and solutions. Storage tanks/vessels can either be horizontal or vertical in their orientation. 

Horizontal storage vessel is generally mounted on stands or saddles and have an access port either at the bottom or at the top. Vertical storage tanks are erected vertically and have access ports at bottom. These specialized tanks can either be placed above or underground, depending on the construction of the storage facility. The thickness of wall of these tanks/vessels also determine their application or use; while single wall storage tanks can be used for general application, double walled tanks/vessel are used for high pressure considerations.

Description / Specification of Vibro Screen

We are involved in offering a wide range of Vibro Screen to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Vibro Screen. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Dust Cover

We are involved in offering a wide range of Dust Cover to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Dust Cover. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Ball Tray And Ring Tray

We are involved in offering a wide range of Ball Tray And Ring Tray to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Ball Tray And Ring Tray. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Feed Tray

We are involved in offering a wide range of Feed Tray to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Feed Tray. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Quick Opening Clamps

We are involved in offering a wide range of Quick Opening Clamps to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Quick Opening Clamps. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Mesh Fixing Fixture

We are involved in offering a wide range of Mesh Fixing Fixture to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Mesh Fixing Fixture. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Feeder Hopper

We are involved in offering a wide range of Feeder Hopper to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Feeder Hopper. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Anti Vibration Mounts

We are involved in offering a wide range of Anti Vibration Mounts to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Anti Vibration Mounts. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Self Adhesive Labels Rolls

We are involved in offering a wide range of Self Adhesive Labels Rolls to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Self Adhesive Labels Rolls. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Bhagwati Shrink-Sleeve Labelling Machine high speed uses newest shrink technology with MMI and PLC base control panel. The bary centre and base have been accurately design, even use this machine with high speed for long time machine running still very stable and smoothly.

Many model with all kind of speed selection from 50/minute to 200/minute and is suitable for wide range; it can be modified according to package's shape. Can meet, all kind of required no matter it is for cap or bottle. The machine is suitable for Pharmaceutical, food industries; it can be for health-food, medicines, Juices, Milk, Drinks, etc.

Application:
Beverage, Cosmetic, Dairy, Food & Pharma.

Salient Features :

The unit is made compact & versatile as per GMP norms.
The structure of sleeve applicator and conveyor are made of SS 304 and the structure of tunnel is made from MS with powder coating.
Rigid vibration free construction for trouble free performance.
The SS 304 slat conveyor for proper product conveying. (For the processes of sleeve inserting and sleeve shrinking.
Worm for the positive feeding.

Bhagwati Shrink-Sleeve Labelling Machine high speed uses newest shrink technology with MMI and PLC base control panel. The bary centre and base have been accurately design, even use this machine with high speed for long time machine running still very stable and smoothly.

Many model with all kind of speed selection from 50/minute to 200/minute and is suitable for wide range; it can be modified according to package's shape. Can meet, all kind of required no matter it is for cap or bottle. The machine is suitable for Pharmaceutical, food industries; it can be for health-food, medicines, Juices, Milk, Drinks, etc.

Application:
Beverage, Cosmetic, Dairy, Food & Pharma.

Salient Features :

The unit is made compact & versatile as per GMP norms.
The structure of sleeve applicator and conveyor are made of SS 304 and the structure of tunnel is made from MS with powder coating.
Rigid vibration free construction for trouble free performance.
The SS 304 slat conveyor for proper product conveying. (For the processes of sleeve inserting and sleeve shrinking.
Worm for the positive feeding.

[Automatic Induction Cap Sealing Machine]




 

Technical Specifications:

Model No.

SB-SLEEVE-120

Voltage

220V/380V 50/60 HZ 3 PHASE

Bottle Diameter Ø55~Ø95 / Ø95~Ø125
Max. Speed Up to 120 Bottle per minute
Power 2.5KW
Label Insertion Length 300MM
Range Of Label Thickness 0.035~0.08MM
Material PVC/PET/OPS
Shrink Tunnel Capacity 5KW~17.5KW

The Om Bhagwati Labelling Technologies’s Automatic Vertical High Speed Sticker Labelling Machine Model SBSL-150-B, is one of the most user friendly. The Machine incorporates latest sophisticated Micro Processor Control Label Dispensing system with user friendly Sensing system for Label and Product. The Machine is suitable for Labelling on Round Bottle, Jars and other round objects. It is capable of Labelling up to 150 Products per minute depending on products diameter and label size.

Machine is suited for Glass, Plastic, Aluminum, PET bottles / jars of Pharmaceuticals, Mineral Water, Food Products and Pesticides having bigger Label Height and Length.

The Om Bhagwati Labelling Technologies’s Sticker Labelling Machine SBSL-150-B has its own unique single point synchronized speed control system. The Inbuilt Automated Label Length detection systems eliminates any need for manually feeding and storing of Label Length data in memory and retrieving the same every time for change of Label Size & re-starting the machine. The System thus saves valuable time, avoiding machine-down time, and helps achieve higher production. 

Machine can be supplied with Optional Toughened (Tampered) Glass or Acrylic Safety Cabinet. Machines having required all basic features as a standard fitment to match the current market needs and also saves cost and time.


Built-In Unique Features :

No Label Data Input/retrievals require for any Label Size
No Change Parts for Product and Label size
Synchronized speed of Label Dispensing, Conveyor and Pressing Device
Virtually Maintenance free machine
Easy to change label application height
User Friendly Label Placing Adjustments
Suitable for On-Line InkJet and Contact Coding System
Suitable for Partial, Full Wrap Around and Overlap Labelling
Built In A.C. Variable Frequency Drive System.
Fully Stainless Steel finish Machine. 

Automatic Hologram Sticker Labelling Machine is suitable for applyingHologram Sticker Labels on Various types of Label and Film Roll used in Packaging Industries. It is capable of Labelling up to 300 Hologram per minute depending on Length and Hologram size.
 

Hologram Applicator is fully synchronized with all operations including Product Feeder, Roll Winder and Label Dispensing for optimum Labelling accuracy; it also helps to change the Labelling speed online with the help of Single Speed Pot provided on control panel.

Hologram Applicator is available with unique single point synchronised speed control system. The Inbuilt Automated Label Length detection systems eliminates any need for manually feeding and storing  of Label Length data in memory and retrieving the same every time for change of Label Size & re-starting  the machine.

Applicator is fully synchronized with all operations including Product Feeder, Roll Winder and Label Dispensing for optimum Labelling accuracy; it also helps to change the Labelling speed online with the help of Single Speed Pot provided on control panel.

Label applicators are available with unique single point synchronized speed control system. The Inbuilt Automated Label Length detection systems eliminates any need for manually feeding and storing  of Label Length data in memory and retrieving the same every time for change of Label Size & re-starting  the machine.


 

Features of Label Applicator

User friendly machine
Micro-controller based controller along with programmable feather touch keyboard and LCD Display.
On line 5-digit counter display, to know the output (total production).
Micro-controller based fiber optic product sensor.
Label release & fixing mechanism to release the label.
Different types of coding devices are available for over-imprinting as per customer requirement, which prints messages such as Mfg. Lic. No., Batch No. , Mfg. Date, Exp. Date, Price etc.
In feed & out feed of products which is to be labeled can be feed by manually or from any product transmission system.
Label dispensing unit with vertical and horizontal adjustable mechanism.
Proper fixing of label.
"No Product No Labeling".
Accuracy + 1 mm.
Stepper / Digital Servo technology.
Supply: 230 Volt Ac / 50 Hz. 

[Automatic Induction Cap Sealing Machine]
 

 Label Applicator is useful to label on

Ampoules
Vials
Glass Bottles
Pet Bottles
Tins
Pouches
Cassettes
Floppy Disk
Square Box
Containers
Syringes and many more products
Label Applicator: Application
 

 Label Applicator: Application

Label Applicator are used in various industries such as

Food and Beverages
Pharmaceuticals
Cosmetics
Personal Care Products
Electronics
Health Care
Agriculture
Pesticides
FMCG
Distribution, logistics, handling

 

Technical Parameter:

Model:

SBLABEL-03 SBLABEL-04

Label Size:

Width 8~50mm Width 10~60mm

Labeling Speed:

Up to 120 Product Per Minute Up to 300 Product Per Minute

Labeling Precision:

+ -1.0mm + -1.0mm

Power Supply:

110V/220V 50/60HZ 110V/220V 50/60HZ

Roll inter:

Φ75mm Φ75mm

Roll Outer:

≤Φ300mm ≤Φ300mm

 
Learn more about products detailed description, pricing and service, please send mail to us!

Om Bhagwati Labelling Technologies India's market leader in design and manufacture of self adhesive Labelling machinery for the packaging industry.

Since Om Bhagwati Labelling Technologies is pioneered the development of Labelling machinery and its technology has grown to be a market leader working with many blue chip companies world wide. 

Our machinery is sold within many varied industries such as: pharmaceutical, toiletries, cosmetic, beverage and food etc.

OBSL-300 Automatic Self Adhesive Vertical Labeling Machine is used for labeling of round container which are previously filled and sealed. No change parts are required for change over of container size.

Machine conveyor will receive container from in feed turntable, it will be separated by the feeding roller assembly to maintain the pre determined space between the two container according to the label length and container diameter. Label is placed on the container immediately when it will be sensed by the container sensor, it ensures instant adhesive of label's edge. Then it passes through the pressing unit resulting in precise registration and crease-free application.

It does not require any change parts for change in container diameter or label sizes. It can handle the diameter range from 20 MM to 90 MM and label height from 10 MM to 115 MM, change over can be done with in few minutes, label height from bottom can be also adjustable for different kind of containers

[Self Adhesive Vial & Bottle Labelling Machine Model : OBSL-300]
Salient Features:

A total CGMP model

High Production Speed up to 300 containers/min and other higher model can give up to 300 containers/min.
S.S. 304 Construction.
Accurate label placement.
Micro processor Control System.
Full Pharmaceutical & Packaging security package system.
Secondary Pressing unit.
Any kind of printing device can be accommodated with machine.
Imported Gear Motor for Conveyor & Pressing unit
Imported Gear Box for Conveyor & Pressing unit
A.C. Frequency Drive for main drive
In built Speed Indicator & Counter
Stepper Motor with Controller
Imported Sensor for Label & Container

a.. Specially designed machine useful to Apply labels on Round Products (full body or partial Labeling)as well as on Flat / Oval products (Single side labeling) 

b.. Any type products can be accommodating like Aluminium, Glass, Plastic & etc. 

c.. No change parts required due to special designed mechanism 

Although there is a wide range of closures available ,the conventional bore sealing has, to date, been the most widely used method of sealing containers .Bore seals are inexpensive to manufacture and are relatively easy to fit. However, bore seals are do not form hermetic , flexible or even reliable seals- they leak. There are three types of closures available, which are either inserted into the neck of or form a combination of two. The effectiveness of this seal can be affected by temperature, natural relaxation & mechanical properties, all of which will cause seal to leak, especially in transit.
 

Using the Induction Cap Sealing Technology, it's now possible to create alternative, alright, hermetic seals on the necks of containers. The process can produce significant cost savings. The seal is strong, flexible & yet easy to remove, and provides protection against cross contamintaion and an effective tamper-evident layer.

[Automatic Induction Cap Sealing Machine]

 Advantages of Induction Cap Sealing

Tamper Proof : It is not possible, from production to the Consumer that the content of the product be manipulated without being clearly noticed.
Product Freshness : The taste and aroma of the product remains intact due to the hermatic seal.
Protection against Leakage : There is no spillage or loss of contents of the product.
Sales Promotion : The foil on the inside can be used for advertising or promotional purposes.
Maximum Filling Speeds : The sealing takes place without any direct contact which allows full potential of the filling plant to be utilsed.
Minimum Effort : The wad is put in the cap by the manufacturers. Thus the filling line requires only the Induction Cap Sealing equipment to be installed.
Indirect Heating : Induction heating allows heat sensitive products such as creams , petroluem product , pesticides etc. to be sealed faster and safely than direct heating which would normally spoil or catch fire.
IGBT Technology : IGBT's are more reliable and efficent at higher line speeds.

Description / Specification of Powder Filler Machine

We are involved in offering a wide range of Powder Filler Machine to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Powder Filler Machine. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Automatic Single Head Auger Type Dry Syrup Powder Filling Machine is a compact model used 
for filling of Dry Syrup Powder into bottle. The incoming dry bottle (sterilized and siliconised) are fed through the infeed Turn Table with suitably guided on the moving delrin flat conveyor belt at the required speed for feeding. Filling head is mounted on machine top plate. When bottle reaches to the filling station, it will be hold by the pneumatic bottle holder. Immediately it will be sensed by the bottle sensor as soon as it gets the signals from sensor magnetic clutch starts to rotate which is mounted on auger shaft. It will fill the desire amount of powder to the bottle through auger, where rotation time is previously saved in PLC control. After filling of bottle pneumatic piston goes back and release the bottle to move on conveyor. The main advantage of this machine is Pneumatic bottle holding system is directly connected with Auger rotation, so till bottle get filled with powder as per set value, pneumatic system will not going to release the bottle. 
 

Total Compact cGMP model.
All parts and assemblies coming in contact with powder and rubber stopper are made of S.S.316 and easily removable for mandatory Autoclaving/ Sterilization.
“NO BOTTLE, NO FILL” System eliminates wastage of costly powder.
Conveyor driving is through High quality imported Gear motor 
Machine speed can be adjusted by A.C. Frequency drive, which is time saving.
Machine is provided with delrin conveyor belt to avoid sticking of vial on conveyor.
Pneumatic bottle holding system is connected with auger rotation, which eliminates
chances of bottle transfer before completion of filling operation.
Total PLC control for the machine.
No change parts are required for any change in bottle diameter from 30 to 120 ml.
Imported Gear Motor for Conveyor drive.
A.C. Frequency drive for Conveyor drive.
“No Bottle, No Filling” System.
PLC control for machine.
Pneumatic bottle holding system.

Description / Specification of Auger Powder Filler Machine

We are involved in offering a wide range of Auger Powder Filler Machine to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Auger Powder Filler Machine. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Super High Speed Rotary Sticker (Self Adhesive) Labelling Machine

We are involved in offering a wide range of Super High Speed Rotary Sticker (Self Adhesive) Labelling Machine to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Super High Speed Rotary Sticker (Self Adhesive) Labelling Machine. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Fully Automatic, User Friendly, Sticker (Self-Adhesive) Labelling Machine, Suitable to apply accurate Labels on Round shaped products having PET, Plastic, HDPE, LDPE, Glass or any other surface. Machine specially designed to apply labels on unstable cylindrical products at higher speed with better accuracy.
The Machine incorporates latest sophisticated microprocessor Controlled Stepper Motor Drive, Fiber Optic Label and Container sensing system. Sticker Labeling machines are 100% User Friendly, Virtually Maintenance Free and does not require Data Inputs for Label Size.

[Fully Automatic Ampoule and Vial Sticker (Self-Adhesive) Labeling Machine]
Salient Features:

No change parts for label size
Single Point on-line Speed Variation control system
Precise Label Placement Accuracy
Built In A.C. Freq. Drive System
Output upto 150 labels per minute.
Fully Stainless Steel Finish including main machine frame
Optionally online coding system

Fully Automatic, User Friendly, Sticker (Self-Adhesive) Labelling Machine, Suitable to apply accurate Labels on Double Side (Front & Back) of Flat/Oval/Square shaped products having PET, Plastic, HDPE, LDPE, Glass or any other surface.
The Fully Automatic Front Back Sticker Labeler Machine incorporates latest sophisticated MicroProcessor Controlled Stepper Motor Drive, Fiber Optic Label and Container sensing system. OBMA-120F Sticker Labeling machines are 100% User Friendly, Virtually Maintenance Free and does not require Data Inputs for Label Size.

[Fully Automatic Front and Back Sticker (Self-Adhesive) Labeler Machine]
Salient Features:

No change parts for container and label size in standard shaped containers
Single Point on-line Speed Variation control system
Precise Label Placement Accuracy
Built In A.C. Freq. Drive System
Output upto 150 labels per minute.
Fully Stainless Steel Finish including main machine frame
Optionally online coding system

Description / Specification of Sticker (Self Adhesive) Labeler Machine

We are involved in offering a wide range of Sticker (Self Adhesive) Labeler Machine to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Sticker (Self Adhesive) Labeler Machine. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Sticker (Self Adhesive) Labeling And Labeler Machine

We are involved in offering a wide range of Sticker (Self Adhesive) Labeling And Labeler Machine to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Sticker (Self Adhesive) Labeling And Labeler Machine. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Fully Automatic Horizontal type, User Friendly, Sticker (Self-Adhesive) Labelling Machine, Suitable for Labeling on many kind of small round Vials and Containers. It had excellent flexibility to handle small size of container at high speed. The Fully Automatic Horizontal Ampoule Sticker Labeling Machine incorporates latest sophisticated Micro Processor Controlled Stepper Motor Drive, Fiber Optic Label and Container sensing system.

[Fully Automatic Horizontal Ampoule Sticker Self Adhesive Labeling Machine]
Salient Features:

No change parts for label size.
Built In A.C. Freq. Drive System.
Output 60 to 280 labels per minute in double track operation.
Fully stainless steel finish. Optionally online coding system.
Suitable for Wrap-around and Overlap Labeling

Description:

"GMP" Model based on advanced technology.
Single Operator for Two Operations.
Less Floor Area - as both the sections driven by one motor.
No Contamination as immediate sealing of filled bottles.
Accuracy ±1% due to piston dozing principle.
Centralized Volume Adjustment System.
No Bottle No Fill for individual head, hence no spillages.
Placing of Cap Feeder Outside Monoblock-avoid entering of dust in it.
Fewer Caps in chute automatically stop the machine.
Additional Sensors for Minimum and Maximum Level of Cap in chute which automatically start and stop rotary cap feeder to avoid Damage of caps during Rotation and Wastage of Energy.
Better finish imported polished, laminated S.S. sheet used.
Electronic liquid level controller and pneumatically controlled control valve.
Drip trays under the conveyor.
Self Lubricating UHMW- PE Guide profile for Low friction wear surface, smooth and noiseless conveying.
Universal coupling for quick and easy setting of In-feed worm.
Safety Guard for Operation and Protection.
Electronic Sensor at out feed for Bottle Jamming.

Optional Features :

Motorized Height Adjustments.
Automatic chain washing system for conveyor belt.
In-built pre-inspection.
Nitrogen Flushing.
Cap Elevator to feed caps to the feeding bowl.

Technical Apecification:-

Model SRPM - 6/6 SRPM - 8/8 SRPM - 16/8
Output/Hour 2500 to 7500 Bottles 4000 to 10,000 Bottles 7000 to 14500 Bottles
Number of head/syringe 6 8 16
Number of head/syringe 6 6 8
Direction of movement Left to Right
Fill Size 30 ml. to 200 ml.
Electrical Specification Main Machine 3 HP / 415 Volts / 50 Hz. 5 HP / 415 Volts / 50 Hz.
Oriental Bowl 0.25 HP / 415 Volts / 50 Hz. 0.5 HP / 415 Volts / 50 Hz.
Conveyor 0.5 HP / 415 Volts / 50 Hz. 0.75 HP / 415 Volts / 50 Hz
Height of Conveyor 910 mm to 960 Adjustable
Machine Dimensions 3050 mm (L) x 1400 mm (W) x 2200 mm (H) 3660 mm (L) x 1700 mm (W) x 
2400 mm (H)
Case Dimensions 3250 mm (L) x 1600 mm (W) x 2200 mm (H) 3850 mm (L) x 1900 mm (W) x 
2400 mm (H)
Net Weight 2500 Kgs. 2650 kgs. 4200 Kgs.
Gross Dimensions 3000 Kgs. 3250 Kgs. 5000 Kgs.
Change parts required A) Container: Star Wheel, Back guide, Feed Worm, Nozzle (B) Cap: Die, Delivery chute, bowl. (c) Syringes (if
volume higher/lower then above specification)
* Depends on fill size/ nature & viscosity of liquid
**We can supply as per client's requirement
***with the help of change parts

Gravity Filling Machine:

Gravity filling system is simplest and efficient filling system for non carbonated liquids, like vacuum filters, these fillers also maintain same level while filling particular size adjustment and fill by gravity principle. It is used for filling only non carbonated liquids. Gravity fillers are available in options of with and without partial vacuum depending upon applications.

Direct contact of filling tank and filling nozzles both in stainless steel avoids plastic tubings. Thus, no chances of contamination, easy cleaning and change over from one product to another.

Vacuum Filling Machine:

Vacuum filler is a rotary level filler which fills with vacuum principle and maintains same level while filling particular size adjustment. It is used for filling only non carbonated liquids.

Applications:

To fill-liquor, pharma liquids, household liquids in glass rigid bottles and containers.

Salient Features:

Machine is of simple design and with very less moving parts. Thus, easy to maintain.
The bottle lifters are mechanical spring loaded. .
All Change parts made out of UHMW.
Centralized lubrication.
Capable of handling bottles of any shape and size.
Speed variable with variable speed pulley. However, AC frequency drive can also be provided at an additional cost.
Inbuilt conveyor with overlapping at out feed end driven by imported speed variator.
Higher models fitted with automatic overflow system.
Safety hood aluminum S. S. frame with toughened glass can also be provided at additional cost.
Easy change over from one size to another.

Operation :

Plate & Frame Type Filter Press is suitable for Kieselguhr / Sheet Filter for Coarse, polishing and Sterilizing filtration duties. Filter Press constitutes of Fixed, Moving and Rocket body all of which are cladded with stainless steel sheets. All the joints are welded. The Fixed and Rocket body are connected with pipes, forming a self supporting chasis. Filter Plates, Frames and Moving body are Guided on chasis pipes. With the Aid of change over plate, filter press can be divided in two sections for two Stage filtration.

Technical Details: :

Sr. No. Model Filter Plate Size
(cm x cm) F.A/ Plate 
(m2) Cake Holding Capacity/ Frame
13 mm 25 mm 40 mm
Ltrs. Ltrs. Ltrs.
1. S - 20 20 x 20 0.057 0.375 0.72 1.2
2. S - 40 40 x 40 0.265 1.710 3.31 5.28
3. S - 60 60 x 60 0.640 4.000 7.70 12.7

Application :

Filtration of Sugar Syrup based liquid.
Kieselguhr Filtration.
Filtration of thin liquid.
Retention of solids/ Carbon.

Applications:

Chemical Industry:
Cleaning agents
Polishing agents
Lubricants
Colors
Lacquers
Anti-corrosion products
Cough syrups
Wax emulsions
Silicone emulsions
TiO2-suspensions

Colloidal suspensions
Impregnating agents
Pesticides
Fungicides
Pharmaceuticals:
Ointments
Gels
Infusion solutions
Suppository masses
Coatings
Lotions (W/O or O/W)

Paraffin emulsions
Lipid emulsions
Disintegration of
vegetable substances
Antiseptics
Serums
Vaccines
For Blending, Heating & Cooling

1st Stage:

Special pumping rotor for turbulence in the vessel
high circulation capacity for viscosities up to 100.000 cp
high pressure for CIP-cleaning gentle circulation

2st Stage:

Dispersing with an optimum generator for finest droplet sizes for emulsions with long term stability suction of powders or liquids directly into the dispersing zone without additional vacuum pump
Excellent and constant mixing of the vessel content is guaranteed by a special spiral agitator: Optimum mixing in vertical and horizontal direction
reversible direction of rotation flexible scrapers made of Teflon, free of dead spots can be heated or cooled, thus caring for short heating/cooling times
The procedure of the mixing process is controlled by means of a modern electric control with touch screen monitor, which can be extended on demand

Construction:

Vertical, Cylindrical, Top & Bottom Dished End Jacketed, Insulation, Agitation, Leg Supports

Capacity:

From 100 Liters To 10000 Liters

MOC:

Contact Parts S.S.316, S,S,3161 Jacket, M.S., S,S, 304

Finish:

220 Grit lnside & 150 Grit Outside

Design:

Internal, Atm, External: 3 Bar @ 150°

Agitator:

Propeller, 6 Bladed Turbine, Off Center With Single Baffle Or Nil

Rpm & Seal:

500, 750, 1440, Stuffing Box Or Mech. Seal with Cooling Pot

Special Feature:

Low Power Consumption No Coupling Inside Or Outside Top Cover welded Or Bolted with

Accessories:

Spray Ball Thermowell with Dial Gauge Safety valve Pressure Gauge On Steam Inlet Connection Level Indicator
 

The combination of special designed high speed emulsifying head and low speed blade agitator with attached scrapers allows to achieve a high efficiency of mixing & homogenizing process.
The mixture is sucked through the narrow gap between the high speed rotating rotor and fixed stator of emulsifying head. Due to the turbine effect of emulsifying head, the circulation of product in the mixing vessel is formed.
Low speed blade agitator helps to produce the laminar and turbulent flows in the product and provides the heat-exchange. The teflon (or silicon rubber) scrapers, which are fixed at the outer mixing frame of blade agitator, scrape off the material sticked to the inner wall of vessel.
Due to the high speed rotation of emulsifying head in combination with the effect of low speed blade agitator and scrapper rotating in different direction (forward and backward),, the mixture is processed by micro-grinding, smashing and dispersing of raw materials and the product can be homogenized completely without any "dead" corners in the mixing vessel. The various types of emulsifying head can be chosen depending on the different feature of products and requirements of customer.