Applications:

Our Machine suitable for dry syrup, talcum, spices powder, flour Free Flowing Powders Chemicals, Pharmaceutical Powers, Food & Beverages, Cosmetics powder, Pesticides Powder etc.

Description:

Automatic Auger Type Dry Syrup Powder Filling Machine is a compact model used for filling Dry Syrup Powder in bottles.

Operation

The incoming dry bottle sterilized is fed through the in feed Turn Table with suitably guided on the moving Delran flat conveyor belt at the required speed for feeding. There are two separate filling head mounted on machine top plate in the same line. When bottle reaches to the first filling station, it will be held by the pneumatic bottle holder. Immediately it will be sensed by the bottle sensor as soon as it gets signals from sensor magnetic clutch starts to rotate which is mounted on auger shaft. It will fill the desired amount of powder to the bottle through auger, where rotation time is previously saved in PLC control. After filling of first bottle pneumatic piston goes back and release the first bottle to move on conveyor, By the same time second bottle also moves along with the first bottle in empty condition. In second filling head same operation will be performed but this time second bottle get filled and first bottle moves further for next operation.
The main advantage of this machine is Pneumatic bottle holding system is directly connected with Auger rotation, so till bottle get filled with powder as per set value pneumatic system will not going to release the bottle.

Technical Details: :

Model
Direction Left To Right.
Production Rate Up to 40 containers per minute
Fill Capacity 10gm to 50gm (with different set of Auger and funnel) Fill range depending upon Bottle opening and bulk density of powder.
Accuracy ± 2% depending upon consistency and the Uniformity of bulk density of powder under controlled level of Humidity (i.e.35%)
No. of Heads SINGLE
Electrical Supply 1.00 HP For Main Drive. 0.25 HP for conveyor
Power Requirement 440 Volts, 3 Phase (4 wire System) 50 Hz.
Height of Conveyor Adjustable from 850 To 900 MM
Pneumatic Air Filtered, oil free, sterile low pressure AIR at 5kg/cm2

Salient Features:

Total Compact c GMP model.
All parts and assemblies coming in contact with powder and rubber stopper are made of S.S.316 and easily removable for mandatory Autoclaving/ Sterilization.
"NO BOTTLE, NO FILL" System eliminates wastage of costly powder.
Conveyor driving is through High quality imported Gear motor
Machine speed can be adjusted by A.C. Frequency drive, which is time saving.
Machine is provided with delrin conveyor belt to avoid sticking of vial on conveyor.
Single track bottle movement, reduces setting of supporting guide rails and semi skilled person can also easily operate the machine.
Pneumatic bottle holding system is connected with auger rotation, which eliminates chances of bottle transfer before completion of filling operation.
No change parts are required for any change in bottle diameter from 30 to 120 ml.
Imported Gear Motor for Conveyor drive.
A.C. Frequency drives for Conveyor drive.
"No Bottle, No Filling" System.
Pneumatic bottle holding system.

Applications:

Our Machine suitable for dry syrup, talcum, spices powder, flour Free Flowing Powders Chemicals, Pharmaceutical Powers, Food & Beverages, Cosmetics powder, Pesticides Powder etc.

Description:

The Automatic High Speed Rotary Monoblock 16x8 Head Dry Syrup Powder Filling & Capping Machine Model SBPFC-16/8 is suitable for Glass, Plastic, PET, HDPE, and LDPE Bottles with maximum speed of 100 Bottles per minute depending on Powder Fill Volume, Type of Powder, Bottle Diameter and Bottle Neck Diameter. Machine in Stainless Steel Finish with heavy duty frame structure with S.S, Cladding. All parts coming in contact with Powders are made from SS 316 Materials and HDPE Funnels. The Machine works on proven time tested Vacuum and Air Systems to fill powder in Bottle achieving higher speed and higher accuracy. Machine with unique Bottle Lifting and Neck Holding system avoid spillage of powder on bottle shoulder, neck and body keeps bottle clean and also avoid wastage of powder. 

Machines require small area due to Monoblock design with Filling and capping operation. Machine with complete synchronization of Bottle Infeed Star Wheel, Powder Wheel movement and out feed Star wheel as well as capping operation for smoother operation. Machine with Rotary Bottle Moving system ensures very high speed powder filing through independent moving funnel along with bottles for greater speed and performance without compromising speed and fill accuracy. Machines with unique vibratory system inside the funnel helps filling of semi free flow type powder at higher speed. Machine can be used for ROPP (Alum. Cap) as well as Screw Cap with the help of change parts. However for common application of ROPP Cap and Screw Capping on same machine, please ensure that the thread of Screw Cap should not have more than 1.5 turn for Capping, for separate application any type of Cap can be used without limitation.

Technical Details: :

Bottle Diameter Up to 85mm*, Square or Rectangular bottles can be used
Bottle Height 100mm* Maximum
Cap any type of ROPP or Screw Cap, Sample required for evaluation
Fill Range 5gms to 30gms In Single Dose with the help of change parts for different fill volume
Fill Accuracy +1 to 2% Depending upon the Powder, under the controlled level of Humidity
humidity H Below 30% Rh required on machine to be arrange by customer
Electrical 415 VAC 3Phase and 220 VAC Single Phase Power Supply (50 Hz) with A.C. Drive
Power 2.0 H.P. For Machine and 3.0 H.P. For Vacuum Pump
Compressed Air Filtered, Oil Free 2kg/cm2 provided by customer only
Vacuum 28" Hg. @ 300 LPM, provided by Customers only, 500LPM recommended
Conveyor Height 815-940 mm
Overall Dimensions 2500 mm (L) x 1250 mm (W) x 2000 mm

Salient Features:

No Bottle – No Fill System
Unique Continues Motion Powder Wheel Movement for Smoother operation
Rotary Bottle Movement System with Rotary Funnel System
Funnel with Unique Vibratory system for filling semi free flow powder at higher speed
All contact parts with easy removal system for Cleaning / Auto Claving / Sterilization
Machine construction in SS304 material
Filling Accuracy of +1 to 2% depending on powder at controlled humidity below 30% RH
Automatic Infeed and Exit of Bottles through Star Wheel System
No Bottle at infeed conveyor - Automatic Machine on/off system
Low Air - Machine Stop System
Low Vacuum – Machine Stop System
Low Cap Level – Machine Stop System
Automatic Cap Feeder On - Off System to avoid damage to the cap avoiding extra movement
Toughened Glass Safety Cabinet
Blower for dust extraction

Applications:

VFFS Machine for Free flow powders such as coffee, tea products, spices like turmeric, chilly, spices powder, flours like wheat, Maida, besan powder, skimmed Milk powder, tooth powder, herbal powder, talcum powder, distemper powder, glucose powder, chemical, pharmaceutical, pesticides, insecticides, and semi solids like automobile & industrial greases, garlic paste, tamarind paste, ointments etc,

Operation:

The Bhagwati Make vertical form, fill and seal machine is handles a single reel film stock. Max. Reel Dia. is 530 mm on 76 mm core. The Auger Powder Filling Machine has the facility to be provided with a variety of filling heads. Draw down of the film is through draw down belts controlled through a servo motor. The length of the bag is controlled by print registration system which is PLC based. For unprinted film, the bag length can be adjusted from the single touch key pad provided on the front panel. The Auger Powder Filling Machine will accept most types of laminated films up to a maximum of 500 gauges. It is important that the sealing medium incorporates the best possible slip characteristics. Pure unsupported polythene film may be used with special impulse sealing equipment.

Technical Details: :Auger Powder Filling Machine

Feeding head Auger Screw filler with revolution counter
Production speed 60 to 70 pouches / min (depending on product)
Machine control system PLC (Programmable Logic Controller)
Packing range 14 gm to 50 gm
Film width up to 450mm
Film thickness 75-100 microns
Film material Laminated or Co-Extruded Virgin films
Sealer heating system Continuous or Impulse
Filling accuracy +/- 0.5 grams
Inner core Dia. of film roll 70 mm
Outer Dia. of the film roll Up to 400 mm
Pouch style Centre sealed Pillow type
Pouch width Up to 215 mm
Pouch length Up to 300 mm
Compressed air pressure 6 kg/cm² at 40º C
Air consumption 60 m³ / hour
Power consumption 3 KW / hour
Peak power 7.5 kW
Power requirement 3 Phase, 415 V, 50 Hz. Plus Neutral
Cooling water requirement 50 liters / hour (Reqd. for Virgin films only)
Film guard mechanism Auto stop when film is exhausted
Pouch Counter Provided
Date printing device Provided
Photo cell Provided
Machine dimensions 3000 (H) x 1500 (W) x 2000 (Depth)
Net Weight 1200 Kgs (approx)

Salient Features:Auger Powder Filling Machine

Very easy to operate
Products contact parts are made of stainless steel
Compact design with castor wheel for easy mobility
Unique online telescopic system for easy weight adjustment
Digital temperature controller
Heater indicator with buzzer
Digital Photocell control system automatically adjust & correct "Eye Mark"( ) within ± 1.5mm.
Wt. base to fill fresh French fries and frozen fries

Description:

Automatic Form, Fill and Seal machine with unique online telescopic cup adjustment system to pack various Granules and Powders like Sugar, Salt, Tea, Spices, Nankeen, Gutkha, Ayurvedic Powders, Milk Powder, Detergent Powder, Mouth Freshener, Tobacco, Pharmaceutical Tablets, O.R.S. Powder, etc. in laminated pouches.

Technical Details: :

Operating Speed 20 to 60 Pouch / Min.
(Depend upon the volume & Characteristic of the Material to be packed)
Power Required Motor : 0.5 to 1.0 HP : 220 V/Single Phase 50 – 60 Hz Heater : 1.2 Kw
Packing Range 0.5 gm to 25 gm with half of change parts
Packing Material All types of heat sealable laminated films
Optional Attachments Online Batch Coding Unit
Nitrogen Flushing System
Machine Dimensions L : 800 mm W :700 mm H :1800 mm Approx.
Net weight 300 – 450Kg. Approx.

Salient Features:

Very easy to operate
Products contact parts are made of stainless steel
Compact design with castor wheel for easy mobility
Unique online telescopic system for easy weight adjustment
Digital temperature controller
Heater indicator with buzzer
Digital Photocell control system automatically adjust & correct "Eye Mark"( ) within ± 1.5mm.
Wt. base to fill fresh French fries and frozen fries

Application:

Our Powder Filling Machine suitable for dry syrup, talcum, spices powder, flour Free Flowing Powders Chemicals, Pharmaceutical Powers, Food & Beverages, Cosmetics powder, Pesticides Powder etc.

Description:

Bottle's are coming from two ways conveyor & stopping by star wheel & fill through dozing wheel, accordingly can fill up to 30 gms up to 60 gms can fill by double doze. Setting of the dozing size is to be made by the help of Dozing arrangement [dozer].

Fill Capacity:

12 gms to 30 gms/ single doze with different powder wheel & up to 60 gms fill by double size fill depending on neck diameter and powder characteristics.

Accuracy:

+2% for Depending Upon the Consistency, Uniformity & Bulk Density of Powder under the Controlled Level of Humdity Below 30%.

Operation of the Equipments:

Conveyor transfer the bottles on to the start plate which indexes the tubes to the powder wheel where dosing of powder takes place. There are two powders Wheel given for dozing of the powder in the bottles. The powder is stored in a hopper which is agitated by pair of mechanical agitators for maintaining consistency and uniform bulk density.The powder wheel has eight rotating ports which rotate at pre-determined speed below the powder hopper with practically no clearance. The wheel consists of piston in each port, behind which there is vacuum plate again without any clearance with the help of spring pressure. Precise volume of powder is sucked with the help of vacuum, volume defined by the piston length and diameter is dozed in to the tubes while getting index and achieving the position vertically above the tubes

Technical Details: :

Model No. SBPF-D-80 - Powder Filling Machine
Product Dry Syrup Powder
Out Put Up to 70 Bottle Per Minute
Electrical Motor 1 H.P, 440 Volts, 3 Phase, 4 Wire Systems, 50 Hz
Accuracy ± 1% depending upon consistency and uniformity of bulk density of Powder under controlled level of humidity (below 28% Rh)
Compressed Air Max. 2 Kg /Cm2 Oil Free
Vacuum Pump 500 Liters Capacity for each head

Salient Features: Powder Filling Machine

Design confirms cGMP Norms.
All contact parts of SS 316
Powder wheel piston adjustable depending to filling.
Body makes to M.S. angle structure all covering to SS 304.
Two bottles setting separate adjusting for cantering to powder filling station. Salient Features of the Equipments.
No Container - No Filling" system eliminates wastage of costly powder
Over Load Relay for any over load accident.
Imported Gear Box with motor.
A.C. Frequency Drive
Acrylic Cabinet with imported Aluminium Structure provided on extra cost.

Application:

Our Machine suitable for dry syrup, talcum, spices powder, flour Free Flowing Powders Chemicals, Pharmaceutical Powers, Food & Beverages, Cosmetics powder, Pesticides Powder etc.

Description:

Automatic Auger Type Dry Syrup Powder Filling Machine is a compact model used for filling Dry Syrup Powder in bottles.

Operation:

The incoming dry bottle sterilized is fed through the in feed Turn Table with suitably guided on the moving Delran flat conveyor belt at the required speed for feeding. There are two separate filling head mounted on machine top plate in the same line. When bottle reaches to the first filling station, it will be held by the pneumatic bottle holder. Immediately it will be sensed by the bottle sensor as soon as it gets signals from sensor magnetic clutch starts to rotate which is mounted on auger shaft. It will fill the desired amount of powder to the bottle through auger, where rotation time is previously saved in PLC control. After filling of first bottle pneumatic piston goes back and release the first bottle to move on conveyor, by the same time second bottle also moves along with the first bottle in empty condition. In second filling head same operation will be performed but this time second bottle get filled and first bottle moves further for next operation. The main advantage of this machine is Pneumatic bottle holding system is directly connected with Auger rotation, so till bottle get filled with powder as per set value pneumatic system will not going to release the bottle.

Technical Details: :

Model No. SBAF-120
Direction Left To Right.
Production Rate Up to 100 Bottles per minute
Fill Capacity 5 gms as per Your Requirement (with different set of Auger and funnel) Fill range depending upon Bottle opening and bulk density of powder.
Accuracy ± 2% depending upon consistency and the Uniformity of bulk density of powder under controlled level of Humidity (i.e.35%)
No. of Heads Four
Electrical Supply 2.00 HP For Main Drive. 0.25 HP for conveyor
Power Requirement 440 Volts, 3 Phase (4 wire System) 50 Hz.
Height of Conveyor Adjustable from 850 To 900 MM
Pneumatic Air Filtered, oil free, sterile low pressure AIR at 5kg/cm2

Salient Features:

Total Compact c GMP model.
All parts and assemblies coming in contact with powder and rubber stopper are made of S.S.316 and easily removable for mandatory Autoclaving/ Sterilization.
"NO BOTTLE, NO FILL" System eliminates wastage of costly powder.
Conveyor driving is through High quality imported Gear motor
Machine speed can be adjusted by A.C. Frequency drive, which is time saving.
Machine is provided with delrin conveyor belt to avoid sticking of vial on conveyor.
Single track bottle movement, reduces setting of supporting guide rails and semi skilled person can also easily operate the machine.
Pneumatic bottle holding system is connected with auger rotation, which eliminates chances of bottle transfer before completion of filling operation.
No change parts are required for any change in bottle diameter from 30 to 120 ml.
Imported Gear Motor for Conveyor drive.
A.C. Frequency drives for Conveyor drive.
"No Bottle, No Filling" System.
Pneumatic bottle holding system.

Application:

Our Auger Powder Filling Machine suitable for dry syrup, talcum, spices powder, flour Free Flowing Powders Chemicals, Pharmaceutical Powers, Food & Beverages, Cosmetics powder, Pesticides Powder etc.

Description:

Automatic Auger Type Dry Syrup Powder Filling Machine is a compact model used for filling Dry Syrup Powder in bottles.

Operation:

The incoming dry bottle sterilized is fed through the in feed Turn Table with suitably guided on the moving Delran flat conveyor belt at the required speed for feeding. There are two separate filling head mounted on Auger Powder Filling Machine top plate in the same line. When bottle reaches to the first filling station, it will be held by the pneumatic bottle holder. Immediately it will be sensed by the bottle sensor as soon as it gets signals from sensor magnetic clutch starts to rotate which is mounted on auger shaft. It will fill the desired amount of powder to the bottle through auger, where rotation time is previously saved in PLC control. After filling of first bottle pneumatic piston goes back and release the first bottle to move on conveyor, by the same time second bottle also moves along with the first bottle in empty condition. In second filling head same operation will be performed but this time second bottle get filled and first bottle moves further for next operation. The main advantage of this Auger Powder Filling Machine is Pneumatic bottle holding system is directly connected with Auger rotation, so till bottle get filled with powder as per set value pneumatic system will not going to release the bottle.

Technical Details: : Auger Powder Filling Machine

Model No. Auger Powder Filling Machine - SBAF-100
Direction Left To Right.
Production Rate Up to 80 Bottles per minute
Fill Capacity 5 gms as per Your Requirement (with different set of Auger and funnel) Fill range depending upon Bottle opening and bulk density of powder.
Accuracy ± 2% depending upon consistency and the Uniformity of bulk density of powder under controlled level of Humidity (i.e.35%)
No. of Heads Three
Electrical Supply 2.00 HP For Main Drive. 0.25 HP for conveyor
Power Requirement 440 Volts, 3 Phase (4 wire System) 50 Hz.
Height of Conveyor Adjustable from 850 To 900 MM
Pneumatic Air Filtered, oil free, sterile low pressure AIR at 5kg/cm2

Salient Features: Auger Powder Filling Machine

Total Compact c GMP model.
All parts and assemblies coming in contact with powder and rubber stopper are made of S.S.316 and easily removable for mandatory Autoclaving/ Sterilization.
"NO BOTTLE, NO FILL" System eliminates wastage of costly powder.
Conveyor driving is through High quality imported Gear motor
Auger Powder Filling Machine speed can be adjusted by A.C. Frequency drive, which is time saving.
Auger Powder Filling Machine is provided with delrin conveyor belt to avoid sticking of vial on conveyor.
Single track bottle movement, reduces setting of supporting guide rails and semi skilled person can also easily operate the machine.
Pneumatic bottle holding system is connected with auger rotation, which eliminates chances of bottle transfer before completion of filling operation.
No change parts are required for any change in bottle diameter from 30 to 120 ml.
Imported Gear Motor for Conveyor drive.
A.C. Frequency drives for Conveyor drive.
"No Bottle, No Filling" System.
Pneumatic bottle holding system.

Description:

Automatic volumetric cups type powder filling machine is a compact model used for filling dry syrup powder in bottles.

The incoming bottle is fed through the in feed Turn Table with suitably guided on the moving delrin flat conveyor belt at the required speed for feeding. There are two separate filling head mounted on Granule Filling Machine top plate in the same line. When bottle reaches to the first filling station, it will be held by the mechanical holder. Immediately it will be sensed by the bottle sensor as soon as it gets signals from sensor magnetic clutch starts to rotate which is mounted on auger shaft. It will fill the desired amount of powder to the bottle through auger, where rotation time is previously saved in PLC control.

Technical Details: : Granule Filling Machine

Model Granule Filling Machine - SBCF-6
Direction Left To Right.
Production Rate

Up to 30 Bottles / Min (depend on filling volume and container neck dia.)

Fill Capacity 2 grms to 1000 grms. (with different set of Auger and funnel) Fill range depending upon Bottle opening and bulk density of powder.
Accuracy ± 1% depending upon consistency and the Uniformity of bulk density of powder under controlled level of Humidity (i.e.35%)
No. of Cups 6
Electrical Supply 1.00 HP For Main Drive. 0.25 HP for conveyor
Power Requirement 440 Volts, 3 Phase (4 wire System) 50 Hz.
Height of Conveyor Adjustable from 850 To 900 MM