The BM geared motor for more efficient electric overhead conveyors. The BM09 for low load applications fulfills the requirements of directive C1 of VDE 3643.
Product range Power rating up to 0,55 kW.
Main features
Torque from 90NmRadial force up to 6.500 N versatile installation possibilities Completely enclosed, sealed against dust and water spray Lubrication change first after 15000 hrsLow noise gearing Mains connection 110 ... 690V, 50/60HzEnclosure IP65 (Standard), IP66 (Optional)Connection Standard with CAGE CLAMP®Additional features:Connecting with Plug connectors.CE-MarkCSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001Motors according to EN 60034Corrosion protection CORO1, CORO2, CORO3Hollow shafts available through the whole product range in even the smallest sizes for easy cost effective application. 

Features and benefits
Bauer geared motors have been used in material handling for more than 20 years to drive monorailover head conveyors.
The ideal solution for floor conveyors The clutch lever is always on the "L" side of the gear motor, the side opposite the motor. This enables the gear motor to be designed with an output shaft on both sides, which also allows it to be used as a drive for floor conveyors. 
Reliable operation even in hostile environments The drives are supplied with IP65 degree of protection as standard. This is a great advantage for operation in dusty environments. 
Low-noise operation The noise emission from two-ratio gear motors is lower than three-ratio motors with the same ratios. The first gear wheel, which is primarily responsible for noise, has a smaller diameter than three-ratio models.
Low operating costs Gear motor size BM09 in the load range to approx. 2000 kg has worm gears for the first ratio and spur wheels for the second ratio. The specially developed worm gears with very low ratios provide very high efficiency, similar to that of bevel gear drives.