Highest quality standards are achieved through the implementations of latest technology, decades of experience and everlasting moral values , which have helped us to retain our customers as well as multiply them.
Side mounted heavy duty tank level indicator are suitable for storage tanks, Batch tank, Day tank, Receiver tank. It is simple & reliable devices for direct reading in Atmospheric or pressurised tank application. | ||||||||||||||||||||||
FEATURES:- | ||||||||||||||||||||||
Glass tube is fully protected by box section made out of M.S. Channel 2mm thick light weight & Economical design. Heavy wall borosilicate glass tube 19mm OD available in single length 3mtr. Extended length by coupling through a coupler. | ||||||||||||||||||||||
Material of construction available | ||||||||||||||||||||||
|
Side mounted magnetic level indicator works simple magnetic principle used to get unique, most reliable & absolutely safe level indicator. It is mainly under used for most dangerous liquids even with under high pressure & high temperature.
The unit consist of all SS 316 Parts. With inside of SS main Chamber pipe, The SS magnetic float which moves up & down accurately follows liquid Variation in the tank. The float magnet is operated by magnetically coupled to the follower red magnet outside chamber, which is mounted on front side of the main S.S. pipe. |
|||||||||||||||||||||||||||
Material of construction available | |||||||||||||||||||||||||||
|
Suitable for continuous level indication of horizontal tank and mainly underground tank containing very hazardous and corrosive liquid in nature. It is covered in two units, one units fixed on mounting flange with guided cage assembly & float is connected to the S.S. pipe having imported magnet assembly. Second unit fixed on mounting flange. The magnet assembly moves up & down in the main S.S. pipe chamber. The float magnet is operated by magnetically coupled to the follower red magnet outside chamber which is mounted on front side of the main S.S. pipe. |
|||||||||||||||||||||||||
Material of construction available | |||||||||||||||||||||||||
|
FEATURES:- | ||||||||||||||||||||
It is a simple, accurate , maintenance free & reliable float operated technique adopted for tank gauging in large Non pressurized storage tank where to get a level within 1" or 2" of liquid level is satisfactory and provides the additional convenience of being able to read out at 100 or 200 ft. away from the tank. | ||||||||||||||||||||
Material of construction available. | ||||||||||||||||||||
|
It is designed for most critical requirements of liquid level in vessels under high pressure & temperature condition in petrochemicals, fertilizer and pharmaceuticals & chemical industries involving inflammable toxic liquid, high temp Liquids. | |||||||||||||||||||||||||||||||||||
FEATURES:- | |||||||||||||||||||||||||||||||||||
The glass has precision moulded prismatic grooves cut on its inner side coming in contact with the medium. These level gauges have liquid chamber made out of single piece bar stock. Liquid level in the slotted chamber is seen through heavy duty toughened glasses. These glasses are clamped firmly on the chamber using carbon steel cover plates and using with CS "U" Bolts & Nuts.
|
U tube type Manometer primary standard manometer used for precision measurement of pressure, Vacuum, differential pressure and flow measurement in plant and labs where certain accuracy is required.
Available | : | In wall mounted and stand mounted. |
Range | : | 300 - 0 - 300 mm WC / Hg. 500 - 0 - 500 mm WC / Hg. |
Casing | : | Aluminium powder coated. |
Scale | : | milky white machined engraved. |
Glass Tube | : | Borosilicate heavy wall thickness. |
Wetted parts | : | S.S. - 304. |
Packing | : |
Neoprene / Teflon. |
Single limb Industrial Manometer ( RSA 5040) | ||||||
Single limb well type direct reading manometer for the precision measurement of pressure, vacuum differential pressure, flow and liquid level measurement. Range : 0-760 mm WC / Hg or 0-1000 mm WC / Hg. (Other construction details are remain as above) |
||||||
ARCYLIC BODY MANOMETER (RSA 5130) | ||||||
|
Rotameter are designed for the accurate measurement of rate of flow for liquids and gases. The rotameter is mounted on vertically. A complete rotameter installation consists of tapered glass tube and shielded from all the sided with clearfront visibility. Inside the tubes, the float provides indication of flow rate. |
FEATURES:- |
1. | Over all face to face length 500mm for flanged connection. |
2. | Easily interchangeability of tubes without disconnection from the lines. |
3. | Scale Length 180-210mm. |
4. | Body M.S.powder coated or SS on request. |
5. | Cover M.S.powder coated. |
6. | Accuracy ± 2% of FSD |
7. | Detachable scale with flow rate. |
8. | End connection rotatable through 360°. |
9. | Connection - Flanged & Screwed end. |
10. | Cover glass protected with rubber. |
11. | Gland Bolt : SS 304 Strictly |
12. | Packing : pure teflon. |
|
||||||||||||||||||||||||||||||||||||||||||||
Material of wetted parts : | ||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||
Note : Prevents of glass tube breaking to always open outlet valve & gradually operates inlet valves sizes available from 15 nb to 100 nb pipe size. Flow Ranges available from 25 LPH to 30000 LPH of water & 0.1 to 300nm³/hr Air at NTP. |
Suitable for measurement of low flow rate of liquid / gases. The standard mounting is 1/4" BSP rear and several arrangements of flanged or hose nipple connection can be offered on request
Ranges Available | ||||||||||||
|
It is mainly used for water / salt water, air, nitrogen, hydrogen, natural gas. The acrylic body integral machined cut in acrylic body from imported transparent acrylic blocks sheets. | ||||||||||||||||||||||||||||
Material of construction available | ||||||||||||||||||||||||||||
|
Suitable for metering of opaque fluid under high operating pressure & temperature. It is designed to measure a flow rate of liquids and gases under critical conditions. It consists of tapered metal tube, magnetic float & angular indicating assembly.
Available in SS-316 / SS-304 / SS-316L With flanged connection Line
size from : 20 NB to 100 NB.
Flow Range : 100 to 50000 LPH of water at atmospheric temp & 2.5 to 2000 NM³ / hr of air at NTP.
Accessories : High & low flow alarm electrical transmitter with 4-20 output temp.
Accuracy : ± 2 % of FSD & 0.5 % ± FSD on request.
By pass rotameter suitable for the most economical provides a solution for measuring large rates of flow & suitable in pipelines from 40 NB to 350 NB. | ||||||||||||||||
Available in verity of materials carrier ring impulse piping and the flow rate through the rotameter as a flow indicator with volumetric. The orifice plate dimensions are based on ISO 5167 / BS1042 / BSA | ||||||||||||||||
We require data for offering. | ||||||||||||||||
|
Side Mounted Magnetic Level Switches work on the principle of magnetic repulsion and therefore they are glandless and leak proof instruments. A permanent magnet fitted in the tail piece of the float repels another magnet inside the switch housing which in turn operates an SPDT MICROSWITCH. Microswitch contacts can be utilized for initiating audio-visual signals or pump control.
|
||||||||||||
|
Top Mounted Level Switch work on permanent Magnet Reedswitch basis. The floats which contain permanent Magnets move freely between their stops rising or falling with Liquid level movement. Hermetically Sealed within the tube are reed switches, Completed isolated from the medium. The Magnet's field actuated the reed switch as the float moves while the Stoppers restrict overrun and prevent the reed switch returning to its original position. Stopper positions should not be changed.
|
For Viewing of kinds in pipe lines, Different type of sight glasses can be offered like full view type double window type etc. | |
FULL VIEW TYPE ( RSA 4005 ) | |
|
Material of construction available | |||||||||
|
Specification | ||
Measuring Range | : | 0-5000 MM AND ABOVE ON REQUEST. |
Power Supply Voltage | : | 24 VDC |
Out put Signal | : | 4 mA-20mA DC |
Contact rating | : | one normal open + one normal close. |
Operating temperature | : | -40� c. to 120�c. and above 250�c. on request. |
Measuring accuracy | : | +/-10 mm |
Protection class | : | IP 65 |
Power supply Inlet | : | 1/2" BSP (female thread) |
Process connection | : | Flange type |
Alarm features | : | Upper and Lower alarm - can be fitted at any position within the Measuring range. |
Contact capacity | : | Potential free - Reed switch output |
Specification | ||
Measuring Range | : | 0-4000 MM AND ABOVE ON REQUEST. |
Power Supply Voltage | : | 24 VDC |
Out Signal | : | 4 mA-20mA DC |
Contact rating | : | one normal open + one normal close. |
Operating temperature | : | -40 c. to 120 c. and above 250 c. on request. |
Measuring accuracy | : | +/-10 mm |
Protection class | : | IP 65 |
Power supply Inlet | : | 1/2" BSP (female thread) |
Process connection | : | Flange type |
Alarm features | : | Upper and Lower alarm - can be fitted at any position within the Measuring range. |
Contact capacity | : | Potential free - Reed switch output |
OPTION FEATURES | ||
Display | : | 4 Digital LED Display |
Range & decimal point | : | -1999 to 9999 (field programmable) |
* To embrace new technologies and methods. * To give unsurpassed products and services to the clients. * To constantly look for improvement and changes.