When used to seal Bottom Discharge of a dust collector handling a relatively light dust load and operating at not more than 300 mm W.G. static pressure the light series Rotary Airlock will generally suffice. For a heavier dust loading and higher pressure or other materials handling and feeding applications a heavy duty gravity discharge feeder should be used.

Sanitary Type feeders have both the bearings on one side like monoblock pump and the side cover can be opened and also rotor can be dismantled. As this type of feeder ensures high sealing performance. It is ideal for food and chemicals industries where frequent material change take place and better washing performance is required.

Side Entry feeders are used on applications involving relatively large particles that can not be reduced by shearing between the rotor blades on the housing at the inlet. Side entry feeders are also used where fine products by this shearing action might cause damage to the system or create hazard. The inlet and outlet flanges are offset. Material entering from the side settles into the pocket of the rotor and particles do not get trapped between the blade and the housing. This type of feeders operates at fix speed and about 40% of the pocket capacity.

The Blow-Through feeders has been used for many years in flour handling systems and non-abrasive material conveying systems in large bakeries, flour-mills etc. Being an integral part of the pipe line, Blow-Through Feeder allows the material into a pressure pneumatic conveying system in a very simple and positive way. Feeders in this services has limited range of application involving products which are relatively non-abrasive such as flour, finely ground coating clays, koalins etc.

Description / Specification of Bulk Rotary Air Lock Valve

We are involved in offering a wide range of Bulk Rotary Air Lock Valve to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Bulk Rotary Air Lock Valve. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Couple Drive Rotary Air Lock Valve

We are involved in offering a wide range of Couple Drive Rotary Air Lock Valve to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Couple Drive Rotary Air Lock Valve. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Pressure Conveying Rotary Air Lock Valve

We are involved in offering a wide range of Pressure Conveying Rotary Air Lock Valve to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Pressure Conveying Rotary Air Lock Valve. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Rotary Valve

We are involved in offering a wide range of Rotary Valve to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Rotary Valve. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Rotary Valve With Direct Mount Geared Motor

We are involved in offering a wide range of Rotary Valve With Direct Mount Geared Motor to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Rotary Valve With Direct Mount Geared Motor. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Rotary Valve With Sight Glass

We are involved in offering a wide range of Rotary Valve With Sight Glass to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Rotary Valve With Sight Glass. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

The RICON Dual Tunnel type diverters have been specially designed to route powders and pellets with minimum degradation in pneumatic conveying systems. The RICON plug type diverter is applied in the chemical, pharmaceutical, plastic, food and other related industries.

The RICON plug type diverter consists of an Aluminum housing and end covers in which a plug with two pipes is installed. All product contact surfaces are made from SS 304. Three approved silicone seals guarantee the sealing between housing and plug. The body is pressure tight, so ensuring no leakage to atmosphere. The standard diverter can be used in systems with positive pressures up to 3 bar g (static seals). The sizes 50-150 are optionally available for pressures up to 6 bar g (inflatable seals). The RICON Dual Tunnel Diverter Valve is supplied with a complete electropneumatic control system, including solenoids and inductive position sensors. The standard diverter can be used for product temperatures ranging from –25 °C up to +80 °C at ambient temperatures of –10 °C up to +40 °C. Versions for higher temperatures are available on request.

The RICON Dual Tunnel type diverters have been specially designed to route powders and pellets with minimum degradation in pneumatic conveying systems. The RICON plug type diverter is applied in the chemical, pharmaceutical, plastic, food and other related industries.

The RICON plug type diverter consists of an Aluminum housing and end covers in which a plug with two pipes is installed. All product contact surfaces are made from SS 304. Three approved silicone seals guarantee the sealing between housing and plug. The body is pressure tight, so ensuring no leakage to atmosphere. The standard diverter can be used in systems with positive pressures up to 3 bar g (static seals). The sizes 50-150 are optionally available for pressures up to 6 bar g (inflatable seals). The RICON Dual Tunnel Diverter Valve is supplied with a complete electropneumatic control system, including solenoids and inductive position sensors. The standard diverter can be used for product temperatures ranging from –25 °C up to +80 °C at ambient temperatures of –10 °C up to +40 °C. Versions for higher temperatures are available on request.

Double Flap Valves, also known as Double Flap Valves or Double Flap Gates, are a type of airlock valve commonly used in industrial applications as a component in bulk material handling applications.

Double Dump Valves are primarily used to discharge chunky, pellets, granules or fibrous, bulk materials from hoppers, bins, and cyclones operating under positive or negative pressure.

Double dump valves are used to discharge a flow of material while at the same time serving as an airlock transition point to preserve the pressure differential above and below the valve.

This type of material handling valve is ideal for use with bulky or abrasive materials that would tend to jam or damage a Rotary Feeder

Double dump valves have two trap-door flap plates which open and close on an alternating cycle. The top gate opens to allow collected material to drop through onto the bottom gate. The top gate then re-closes to prevent air leakage above the valve. The bottom gate then opens to allow material to pass completely through the valve. The bottom gate then re-closes to prevent air leakage below the valve. This cycle is continuously repeated in order to maintain a steady discharge of material from the valve, while maintaining a positive seal on the system.

Each flap plate has its own pneumatically operated cylinder and solenoid valve. The timing of the valve is controlled by an electronic signal sent to the solenoid valves. This method of operation is design to provide first class automation with sequential controller for accurate timing of the desire functioning of the valve.

Double Flap Valves, also known as Double Flap Valves or Double Flap Gates, are a type of airlock valve commonly used in industrial applications as a component in bulk material handling applications.

Double Dump Valves are primarily used to discharge chunky, pellets, granules or fibrous, bulk materials from hoppers, bins, and cyclones operating under positive or negative pressure.

Double dump valves are used to discharge a flow of material while at the same time serving as an airlock transition point to preserve the pressure differential above and below the valve.

This type of material handling valve is ideal for use with bulky or abrasive materials that would tend to jam or damage a Rotary Feeder

Double dump valves have two trap-door flap plates which open and close on an alternating cycle. The top gate opens to allow collected material to drop through onto the bottom gate. The top gate then re-closes to prevent air leakage above the valve. The bottom gate then opens to allow material to pass completely through the valve. The bottom gate then re-closes to prevent air leakage below the valve. This cycle is continuously repeated in order to maintain a steady discharge of material from the valve, while maintaining a positive seal on the system.

Each flap plate has its own pneumatically operated cylinder and solenoid valve. The timing of the valve is controlled by an electronic signal sent to the solenoid valves. This method of operation is design to provide first class automation with sequential controller for accurate timing of the desire functioning of the valve.

The material to be sifted is fed into the stationary cylindrical screen by means of a screw mounted on the rotating shaft. A series of paddles which rotate inside the screen without contact, centrifugally force the material against the screen breaking up soft agglomerates. Sub-sieve material (fines) that pass through the screen discharge into a collection hopper at the base of the machine. Oversize material and hard lumps (that cannot be broken by hand) traverse down the length of the screen to the overs outlet. An adjustable baffle plate at the end of the screen regulates the flow of overs.

Designed to meet high-capacity scalping and sifting for both large and small process applications, the Ricon Rotary Sifter proves its cost efficiency daily in the handling of a wide variety of powder, granules, agglomerates and other free flowing materials.

FEATURES

  Dust-free, hygienic operation

  Quiet, vibration-free action

  Quick screen change

  Easy clean-out

  Double sealed outboard bearings with Air Purging

  High throughput capacity

  Continuous operation

  Compact design

  Inline application

  V-Belt Drive

We are engaged into manufacturing High Vacuum Pumps. These Vacuum Pumps are used for different application and are made from superior quality raw material. Some of the features of our products are:

  Capacity

:

50 lit/min to 10,000 min/lit

  Vacuum

:

0.5 mm of HG and higher Vacuum with Booster

  Motor HP

:

0.5, 1, 2, 3, 5, 7.5, 10, 15, & 20

  Type

:

Single Stage unit

  MOC

:

CI, SS 304 & 316

Description / Specification of Bag Filter

We are involved in offering a wide range of Bag Filter to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Bag Filter. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Dust Collecting System

We are involved in offering a wide range of Dust Collecting System to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Dust Collecting System. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Everybody wants to have clean and pollution free air around, and since industries are more responsible for Air pollution. We combat this section. There are several varieties of Bag Filter

A Dust Collector is a system used to enhance the quality of air released from industrial and commercial processes by collecting dust and other impurities from air or gas. Designed to handle high-volume dust loads, a dust collector system consists of a blower, dust filter, a filter-cleaning system, and a dust receptacle or dust removal system. It is distinguished from air cleaners which use disposable filters to remove dust.

In reverse-pulse-jet Bag Houses, individual bags are supported by a metal cage (filter cage), which is fastened onto a cell plate at the top of the Bag Houses. Dirty gas enters from the bottom of the Bag Houses and flows from outside to inside the bags. The metal cage prevents collapse of the bag.

Bags are cleaned by a short burst of compressed air injected through a common manifold over a row of bags. The compressed air is accelerated by a venturi nozzle mounted at the Reverse-Jet Bag Houses top of the bag. Since the duration of the compressed-air burst is short (0.1s), it acts as a rapidly moving air bubble, traveling through the entire length of the bag and causing the bag surfaces to flex. This flexing of the bags breaks the dust cake, and the dislodged dust falls into a storage hopper below.

Reverse-pulse-jet Dust Collectors can be operated continuously and cleaned without interruption of flow because the burst of compressed air is very small compared with the total volume of dusty air through the collector. Because of this continuous-cleaning feature, reverse-jet dust collectors are usually not compartmentalized.

The short cleaning cycle of reverse-jet collectors reduces recirculation and redeposit of dust. These collectors provide more complete cleaning and reconditioning of bags than shaker or reverse-air cleaning methods. Also, the continuous-cleaning feature allows them to operate at higher air-to-cloth ratios, so the space requirements are lower.

This cleaning system works with the help of digital sequential timer attached to the fabric filter. This timer indicates the solenoid valve to inject the air to the blow pipe.

Description / Specification of Reverse Pulse Jet Bag Filter

We are involved in offering a wide range of Reverse Pulse Jet Bag Filter to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Reverse Pulse Jet Bag Filter. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Pneumatic Conveying Systems eminently suitable for the transport of powdered and granular material in factory, site and plant situations. The systems requirements are a source of compressed gas, usually air, a feed device, a conveying pipeline and receiver to disengage the conveyed material and carrier gas.

The system is totally enclosed, and if it is required, the system can operate entirely without moving parts coming into contact with the conveyed material. High, low or negative pressure can be used to convey materials. For hygroscopic materials dry air can be used, and for potentially explosive materials an inert gas such as nitrogen can be employed.

 Pneumatic conveying technologies are divided in vacuum conveying and Pressure Conveying.

APPLICATION :

Industrial furnace and Boiler, Chemical Processing Plant, Textile Plant, Cement Plant, Dairy Refrigeration Plant, Gas and Oil Firing Burner, Dust Collecting System, Ceramic Industries, Petro – Chemical Plant, Power Plant, Air Conditioning Plant, Ventilation System (in Hotels, Hospitals, Restaurant, Residents, Cinema Hall, Tunnel etc.), Pneumatic Conveying System of Powder and Granules

UNIQUE FEATURES :

The RICON Blowers are backed by computer software or design selection and detailed performance characteristics. It can offer low pressure ventilation fans with very high air volume and also makes very high pressure fan. It can offer various types of shaft seals to avoid leakages of gases. The RICON blowers have careful design against noise pollution.

.

To suit the specified application, we design and furnish

  Split Housing construction

  Inlet box

  Inlet Box Damper

  Variable inlet Vanes

  Back Pull – Out design

  Vibration isolators

  Outlet Damper

  Coupling & Belt Guard

  Inspection Door

  Drain Plugs

  Flexible Connectors on inlet and outlet of the fan

  Isolated bearing pedestal support stand

  Shaft Seals – Labrinth Seals

  Stuffing Box

  Heat Sling

  Bearing Cooling arraignment

  High temperature fans