Puretronics Introduces Non-contact Laser Diameter Gauge And Online Controller In Collaboration With European Company. Non-contact Measurement Technique Enable You To Stabilize Your Extrusion Process, Especially For Cable Production Lines. 

It Reduces Waste, Reduce Manpower, Save Raw Material, And Ensure Product Quality.

It Is Easy To Setup And Use. It Is Made Of Aluminum Housing For Durability Even In Rugged Production Environments. It Is Insensitive To Product Vibration And Movement

 
 
Applications

Wire Drawing Power Cable Threads
Fibre Optics Tube Extrusion Tube Lights
Telecom Glass Rods / Tubes Profiles
Building Wire Rops Tools

 
Features
 

High & Low Value Alarm, Out Of Range alarm, Alarm On -Off Selection.
High accuracy, low drift measurements.
Rugged case construction sealed for longer life.
Accurate measurement regardless of where the product is positioned within the measuring gate.
Using an advanced digital signal processor, the LAZER Micrometer sensor head minimizes external interference to give you the most accurate and stable diameter measurements possible.

 
In fact, measurement is so stable that after a year of continuous operation most users will have no need to recalibrate the gauge. The result is a non-contact, in-process system that consistently corrects and supplies accurate diameter from the controller—and keeps your line producing high-quality, cost-efficient product.
 
Accessories
 

Stand with Adjustable Height
EXTRA DISPLAY UNIT : The 5 digit display and simple operating key system. Extension flexibility of Control & Display
Stand with Adjustable Height. X & Y Direction Motorized

 
Technical Specification
 

Model
LAZER 2008
Measurement Range
0.8 – 35 mm
Gate Size
50 mm
Scan Velocity
156 m/s
Resolution
1 micron
Repeatability *
± 1 micron
Accuracy *
± 2 micron or ± %0.1 of reading value
Scan Rate
416 scan/s
Operating Temperature
0 -50° C
Relative Humidity
0 - 95% non condensing
Power Supply
Between 85Vac to 285Vac
Dimension (LxHxW)
384x150x82 mm
Power Consumption
Less than 10 Watt
* Above values are for Averaging of 100 readings. 
* Above values are for Averaging of 200 readings.

Features

Industry 50mm Standard Size, Through Hollow Shaft
Robust mechinical and electrical construction
Protection to IP65
Up to 5000 PPR max.
<300kHz. Frequency

Description
The device works according to the proven 4-wire measurement method which eliminates errors caused by test lead and contact resistances. Thermo voltages that might be in the measurement circle would be compensated automatically by this measurement method. The control of the measurement leads is done with an integrated cable fraction detection.

A temperature compensation for any given sample material such as copper, aluminium, tungsten, etc. is self-evident. The temperature measurement is done by an external Pt 100 sensor or by an external infrared measurement device (ref. to accessories). 

A special measurement voltage input protection was developed for testing large inductive samples so that voltage peaks do not cause permanent damage while pinching off the sample. 16 device settings such as the measurement range, limit values, temperature coeffi cient, etc. can be saved in order to test samples with different parameters in an automatic measurement system. All device specifi c settings are shown to the user via display. Calling up the settings is done via keypad or via PLC interface with a bit pattern (4-bits). It goes without saying that all device settings may also be effected via the RS232 interface.

The high-contrast LCD display with backlight assures very good reading of the measurement value in dark as well as bright spaces.

Product Brief
“Puretronics” presents LOAD CELL for various automation applications to cover most of the automation in converting or process machines. The range of Load cell produced by Puretronics satisfy all demanding applications and can be used for measuring the tension value of all materials including paper, cardboard, plastic film, foil, rubber and wire.

“Precision measurements of web tension is essential to ensure consistent product quality and to maximize productivity Different models are available to meet the requirement like Flat type, Round type and Round Hollow type.

“Pure” series of tension sensors are full bridge, strain-sensitive load cells, with built-in self-aligning bearings that make them suitable for dead shaft or live shaft applications. These are generally used in pairs to support tension sensing idlers on either ends. Standard ratings cover a range from 10 kg to 2000 kg in different sizes. Adaptable for base or flag mounting.

Product Brief
SECOPTA develops and produces laser-based sensor technology for industrial and security applications. The technology relies on a compact, industry approved solid state laser (of the parent company CryLaS) and is powered by proprietary software (neural nets).SECOPTA´s mine searching system LIBS-PROD – which is based on this platform System also analyze s the atomic composition of surfaces. Secopta provides customized analytic tools based on laser spectroscopy. The applied techniques allow online, on-site and in situ measurements.

We manufacture Spark Testers for extrusion and rewind lines to check for defects in cable insulation. Cable passes through in a high-voltage bead chain electrode in the spark tester, and any insulation fault causes a spark from this electrode to the ground via cable core. Any spark is detected by spark tester electronics and registered as a fault. By using spark testers at your extrusion or rewind lines, you can monitor your cable product. If there is any fault in cable insulation, the spark tester will warn you by its alarm and you can search the possible cause and fix the problem, so you get product without any faults.

We manufacture Spark Testers for extrusion and rewind lines to check for defects in cable insulation. Cable passes through in a high-voltage bead chain electrode in the spark tester, and any insulation fault causes a spark from this electrode to the ground via cable core. Any spark is detected by spark tester electronics and registered as a fault. By using spark testers at your extrusion or rewind lines, you can monitor your cable product. If there is any fault in cable insulation, the spark tester will warn you by its alarm and you can search the possible cause and fix the problem, so you get product without any faults.

Product Brief
 
We manufacture Spark Testers for extrusion and rewind lines to check for defects in cable insulation. Cable passes through in a high-voltage bead chain electrode in the spark tester, and any insulation fault causes a spark from this electrode to the ground via cable core. Any spark is detected by spark tester electronics and registered as a fault. By using spark testers at your extrusion or rewind lines, you can monitor your cable product. If there is any fault in cable insulation, the spark tester will warn you by its alarm and you can search the possible cause and fix the problem, so you get product without any faults.

We manufacture Spark Testers for extrusion and rewind lines to check for defects in cable insulation. Cable passes through in a high-voltage bead chain electrode in the spark tester, and any insulation fault causes a spark from this electrode to the ground via cable core. Any spark is detected by spark tester electronics and registered as a fault. By using spark testers at your extrusion or rewind lines, you can monitor your cable product. If there is any fault in cable insulation, the spark tester will warn you by its alarm and you can search the possible cause and fix the problem, so you get product without any faults.  

Description / Specification of Fire Testing System

We are involved in offering a wide range of Fire Testing System to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Fire Testing System. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

The ASCOspeed-Technology is the world wide leading technology in non-contact speed measurement. Based on 25 years of experience in speed measurements for heavy metal industry. This technique is designed especially for applications in rolling mills or processing lines in steel or non-ferrous industry. 

Well-engineered technique, modern technical concept, linear-homogen product series designed with experience of machine builders and users The ASCOspeed series included a complete product family. They are identically in measurement characteristics. The models variegate in different options in interface and functions.

10 Setup-memory tables, very useful, it is possible to give every plant it’s own parameter set. storage in separate setup-tables within ASCOspeed flash memory. So it is easy for service- and maintenance to get the right parameter set by changing the gauges without any detailed programming. The only thing is to switch the setup table 

This is the basic technology to have an excellent stray light rejection. It is insensitive for changing material surface, colour, brightness and radiance.

IIM- cable measurement engineering leads to a better quality assurance lies in the fact that measuring results can be backwards pursed especially in case of customer’s complaints. VisioCablePro is a standardized unit assembly system with components tested as compatible (e.g. cameras, Optics, Lights). The VisioCablePro has a compact simple construction and is very low maintenance

Product Brief
The Printing industry is a day to day market, Automation in this field is now noticed by the user for the quality of Printed material. Which is not possible without the upgraderation of the system & with ARC system. This will give results of International quality of printing & give the user an edge our the competition.
Product Introduction
CRS-2002 Gravure printing system adopted high speed build in MCU which is most advanced in current time, high capacity flash Rom chipset, Onsite bus, fiber sensor, window application software for high technology production .

 
Technical Specification
 

Inspection accuracy reaches +/-0.01mm, highest work speed 600 meters per minutes
It supports max 16 colors and can connect with one group of sheet cutting equipment at the same time.
It can simultaneously inspect and control longitudinal and lateral errors during printing.
CRS-2002Gravure printing color system can display scanning the signal of actual wave and signal gating control wave for each color set.
It can also support focus display so that operator can carefully check if offset location is correct or not.
CRS-2002 Gravure printing color system monitor host can be run on Windows platform. Its interface is user friendly.
CRS-2002 Gravure printing color system uses design of communication bus and system bus layout. It is simple and reliability is high.
CRS-2002 Gravure printing color system is equipped with advanced Fiber color inspect sensor and has very high inspection quality.
Customer can list to tailor the need. It has function of manual / auto switch, error benchmark set, manual adjustment, shift modification and error display, alarm indication .status indication and so on.
CRS-2002 Gravure printing color system interface with touch pad. We have different types for your choice.

 
Application
 

Roto printing Machines
Flexo Printing Machines
Cut-OFF
Front/Back Printing

Linescan system is optimised to detect from small surface defects up to large density defects on film continuous web productions, using state of the art linear scan technology to guarantee the achievement of the demanding resolution/speed requirements.

 Working Principle
The Line scan Inspector defect visual control system uses a set of very high speed digital linear scan cameras exchanging video information to the controlling PCs where the application software acquires and analyses the product images to intercept, detect and classify possible defects.

 Features
 

The system will use a special ultra uniform led light illumination that was found optimal to enhance and detect surface and density defects as well
Reduce maintenance requirements
Eliminates the need of high voltages
Eliminates possible optical beat interference between the high speed line scan cameras and the high frequency driving used in ionised gas lamps.
System can fully work without any electronic interface to customer systems.
System is suitable to be installed on slitter or rewinders

Online Tension Measurement System
For Wire, Strip, thread, rope, Cable, tube, fiber, rod and such similar products. 
Why Industry need it ?
There is direct / indirect impact on product quality with tension variation beyound certain limit. The process like extrusion, stranding, bunching, twisiting, rewinding, coiling, weaving, coating, inspecting, drawing, enamabing or similar where the running product is passing through some process. which directly impact on quality of process and product as well machine performance. Hence the end product quality is been compromised inspeite of willingness to give best quality product by the industry.

Solution:
with the help of experiance in the field over 25 years with feedback and strong support from industry Puretronics is able to introduce Tension Measurment System. which is useful in various application. in continuous production processes the quality of the material tension thus improving finished product quality, reducing waste, increasing processing speeds, and minimizing machine effcuency and low downtime. An Application which can benefit greatly from tension measurment and control inculding Drawing, Steanding, Bunching, Extrustion, Inspection / Rewinding, Coiling Weaving, Rope making Shielding, Coating, enamabling Unwinding / decoiling
Benefits:
 

Gives long lasting performance
Accomodation in existing process, machine is easy
Desired possible automation is very much possible, in order to steamline the process.
Great tool which can help in varoius ways like alarm, value to data logger, digital read out

Features:

Stable design, Standard models are with dynamic balanced ceramic pulles
Choice of mounting to suit specific location
Analogue output which can be used for further automation like close loop tension control, alarm data
Highly precisied digital tension indicator with analogue output

Applications:
APPLICATION OVERVIEW 

Offset printing is a commonly used printing technique in which the inked image is transferred (or "offset") from a plate to a rubber blanket, then to the printing surface. When used in combination with
the lithographic process, which is based on the repulsion of oil and water, the offset technique employs a flat (plan‐o‐graphic) image carrier on which the image to be printed obtains ink from ink rollers, while the non‐printing area attracts a water‐based film (called "fountain solution"), keeping the non‐printing areas ink‐free.
 
Features

Dampening and Impression On/Off
Precise web tension control
Precision register control at any speed
Configuration choice from 1 to 8 colours in offset
One side or both side printing

RIZZARDI is a coating process using powdered metals and special alloys that can be used on any material. Today"Rizzardi"can boast of one of the highest levels of specialization in the field of coatings of hard and semi-hard metals, especially for the metal wire working field.
 
Applications
 

Used on all types of drawing machines
To draw all types of metals and alloys: Copper, Aluminum, Steel, Alloy, Gold, Platinum, Tungsten, etc.
For drawing wires on multiwires

Features
 

All of the coating conditions are monitored by a strict computerized analysis, to obtain consistent omogeneity of the hard metal (chemical, and mechanical characteristics).
The coating offers absolute resistance to its detachment due to certain impacts or pressure from temperature variations.
The coating offers good resistance to wear while maintaining its brightness unchanged with time.
Due to its insulating quality it is particularly suitable for drawblocks and rings used in drawing ultrafine Copper Wire and for conveying pulleys and rolls.
The correct friction coefficient allows a correct number of wraps on the pulling capstan thus eliminating typical problems such as crossover. 

Features
 

Wide degree anale to cover different location in one line likecutter, core
Easy sliding arrangement with scale for easy relocation
Position change does not effect wirings as the unique design gets supply within channel
Strong & easy to use mounting arrangement
Robust Construction

 
Applications
 

Slitting machine for core & Cutter alignment check
Core position check on unwinder, rewinder for example - Rotogravure, Flexo, Lable Printing & Converting Machine, Textile & many more
Repositionof the object. for example :- Laser Cutting, Real Alignment.

The device works according to the proven 4-wire measurement method which eliminates errors caused by test lead and contact resistances. Thermo voltages that might be in the measurement circle would be compensated automatically by this measurement method. The control of the measurement leads is done with an integrated cable fraction detection.

A temperature compensation for any given sample material such as copper, aluminium, tungsten, etc. is self-evident. The temperature measurement is done by an external Pt 100 sensor or by an external infrared measurement device (ref. to accessories). 

A special measurement voltage input protection was developed for testing large inductive samples so that voltage peaks do not cause permanent damage while pinching off the sample. 16 device settings such as the measurement range, limit values, temperature coeffi cient, etc. can be saved in order to test samples with different parameters in an automatic measurement system. All device specifi c settings are shown to the user via display. Calling up the settings is done via keypad or via PLC interface with a bit pattern (4-bits). It goes without saying that all device settings may also be effected via the RS232 interface.

The high-contrast LCD display with backlight assures very good reading of the measurement value in dark as well as bright spaces.

 
Application
 
Fast and accurate measurements of the smallest resistance values are possible with the milliohmmeter RESISTOMAT® model 2316. Due to the rugged aluminium injection moulding desktop housing with membrane keypad it is suitable for use in laboratory and industrial environment likewise. Wires and coils can be measured with temperature compensation. The temperature of the sample is measured with a Pt 100 or pyrometer and the resistance is then corrected to the equivalent at e.g. 20 °C (adjustable) in the instrument.
 
The application range is very wide such as the measurement of:
 

transformer motor coil windings
coils of all kind
cables and wires on the drum or as meter samples
switch and relay contacts
heating elements
fuses
connections and transitions at power rails and many more

 
For a cooling curve recording with freely selectable time interval a data logger for up to 1000 values is available. The complete control via RS232 interface enables the setup of fully automatic test stations. The instrument features a PLC interface for integration into production process control classifi cation and makes selection of the samples an easy task.

Electronic Line/Web Guide System.
Electronic Centre Guide System.
Auto Edge Trimming System (Cutter Guider System).
Electronic Chaser System for Lamination Machines.
Features
High performance with PMDC motor with micro processor base PWM (Pulse Width Modulation) Drive
“MOSFET” Technology for Quick Response to Sensor signal.
Versatile Technology to sense any type of Laminated Material with High Frequency based. Linear Sensor that ensures High Accuracy, RGB colour sensor for true colour sensing or LASER SENSOR, Opto Electronic Sensor.

 
Latest Technology
 

Easy to install connector based designs
Compact Enclosure of Controller Unit with Touch Sensitive switches
Precision & Quick responsive mechanism of Electro mechanical Actuator with the combination of Linear Bearing Offers High Accuracy
Crush Cutter used are specially designed for online Trimming
High Quality M.S. Hard chrome Roller & Hardened Roll made of Bearing Steel.
Auto Lifting of Crush Cutter.

We offer our client a high range of Servo Drives Panels. These are widely acknowledged for its customized features and designs. Our products are applicable in constant and variable torque purposes.

Being easy to install and sturdy in construction, these panels are widely used to control the sensitive motor operations and machines, pumping operations and process control applications. Our Servo drives Control Panels are available in models & Amps/ KVA rates of one Amp to any required Amps.

Wide power and voltage ranges
High performance motor control
Ease of use
Compact size
Robust design for long and reliable service
Robust design for long and reliable service
User safety
Ease of handling and maintenance
Resistance to corrosion
Resistance to corrosion

Features

This equipment is composed of the device generating high frequency and electrode unit
In electrode, high frequency high voltage generates corona discharge in contact with jacketed copper wire. So the surface of jacket (PE, PVC, TEFLON, HDPE, LDPE) is activated and the adhesion is strengthened in the second progress, stamping.
Compact size.
Easy to adjust the electrode.
High efficiency and with performance by using MOFSET.
The interlocking device maintains the safety in operation

 
Specification
 
• Input: 230VAC, 50Hz

• Output: 

• Suitable Up To 15mm Diameter 
  (Bigger Side on Demand)

• Line Speed up To 200mts per Min.

Features

3 Pin System of Live, Neutral And Earth. Ensure Proper Earthing at your end.
MCB
Zero Interlock Provided
Fast acting tripping Device

Operating Details

INPUT: 230/240 Volts 1 Ph 50 Hz AC
OUTPUT: 0-3 kV / 0 – 6 kv One Side Grounded.
MOTORISED CONTROLS

Description / Specification of Moto Knife

We are involved in offering a wide range of Moto Knife to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Moto Knife. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

PREFORMER system has been designed with the aim to control the quality of the PET preforms by detecting their defects. These typical defects may be originated by improper injection moulding, improper preform handling or off-spec/contaminated PET chips fed into the injection moulding machine. The design of this system is the result of more than 20 years of operational experience in injection moulding of PET preforms for the world market. Preformer sorts out with extreme precision + reliability the PET off-spec preforms by the computer vision (5 CCD cameras) and the vacuum technology (mechanical test)

Defects: oval shape, lack of material, lack of tightness of the sealing ring, incorrect geometrical dimensions, deformation, long injection point, micro-holes in the injection point, burnt rings, moisture rings, unmelts, crystalline (haze), foreign particles, black specs, bubbles, chromatic variations, streaks, etc.

 
The Preformer advantages and limits
 
The complete system (PREFORMER) is able to sort and check the quality of 22,000 preforms per hour, whichever the type/dimensions and quality level of t he preforms handled. All commercial sizes of preforms may be handled by Preformer System, ranging from 0.25-0.33 liters to 5 liters preforms including big-slam size, thanks to the specially designed gripping device which grants a high level of flexibility. The systems scraps the defective preforms on one outlet gat e and discharges the “passed” preforms to a second gate, allowing to stock both lots in a palletized standard box next to the control machine.

The main advantages to equip a preform production unit with an off-line quality system, are listed hereinafter:
a. whenever the preform producer lately realize that his injection machine has been producing with inadequate parameters or feedstock for some time, he may use the offline quality system to check every preform in order to scrap only the defective ones, automatically recovering the whole lot b. whenever the preforms’ customer rejects a full consignmen t of preforms after experiencing quality problems on few of them, the producer may recover all the correct preforms out of the rejected lot, by using the off-lin e quality system and quickly return the client the recovered preform lot as a guaranteed on-spec delivery, without being obliged to restart the production of that type of pre form.

It is important to underline that the System is not able to visually detect any defect in the “finish” area of the preform, i.e. the neck of the preform including the thread and the neck ring, apart from the performance of the previously described vacuum control which detects any geometrical defect or lack of material in the cap sealing edge. This limitation of the System is due the fact that the “finish” area interferes with the grips arms and therefore cannot be exposed to the cameras and the illumination system. Sort of “finish” visual control might be performed by installing a supplementary inspector assembly on a special design feeder ramp, where preforms are flowing to the quality cell with a coupled translation/rotation movement aimed to allow 360 degrees “finish” inspection. Another limitation of the System is based on the preform colour intensity: certain difficulty has been experienced in sorting strongly coloured preforms (used for oil bottles, like yellow, red and dark brown ones) bearing light defects: a certain level of transparency is a must for obtaining a perfect image acquisition of the preform and for detecting even its lightest defects.
 
Composition of Performer
 
1 off Quality Control System for PET preforms, PREFORMER TM , version 2007, as composed as follows (with reference to photo):

UNIT 1)
Quality control cell/Inspection module, including: 3-camera visual check for sidewall surface, able to detect defects exceeding or equal 0,2- 0,5 mm within 150 mm range;Seal surface/bottom inspection camera assembly (2 cameras), able to detect same size of defects on seal ring and bottom of preforms, equipped with strobo light device/feeder;New updated software version with enhanced sensitivity on colour variations;Precision chain-driven handling system to position preforms for accurate inspection, with fixtures for one finish/body size only (note: customer must specify size and dwg. of preforms), 30 quick-change grips assemblies for fast job change operation; HW+SW computer system with console, electrical cabinet and cabling, able to control up to 22,000 preforms per hour

UNIT 2)
Preform Feeding System including: Preform Unscrambler, consisting of two inverter driven-variable speed counter-rotating rolls; a vane wheel at each end for re-directing non-oriented preforms; equipped with hand-wheel adjustment of distance between the rolls axis to accommodate different preform sizes; Preform gravity feeding section (feed ramp), equipped with two preform guides with handwheel adjustment for different preform sizes; photocells to ensure automatic ramp filling and machine stop in case of lack of preforms in the ramp, rated capacity 22,000 preforms per hour 

UNIT 3)
Preform Loading Bin and Elevator, including Belt Elevator built in stainless steel with internal plastic lining, designed to be oriented in -90°/ 0°/ 90° positions, stand and connections; Preform Loading Bin, built in stainless steel with internal plastic lining, equipped with a horizontal belt conveyor to continuously feed the elevator without interruption or congestion

UNIT 4)
Vacuum-test/multiple head system, mechanically testing each perform under vacuum with spherical probes, able to detect leaks and pin holes, to be fitted to the basic

Features
It features an excellent performance such as abrasion and erosion resistance, stable print quality, long effective life time, low composite cost with the first-class quality in the world. The cells are characterized of chiseled shape, smooth cell wall, for flexible printing requirement, and is to clean.
 
Application

Wide Flexo Press
Narrow and Lable Llexo Press
Corrugation Paper Printing machine
UV Coating

Description / Specification of Hv Tester

We are involved in offering a wide range of Hv Tester to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Hv Tester. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Extrusion Lamination Plant Control Panel:

Extrusions coating on paper, oven sake material used for packaging. We had development the full control system which includes thyristor (phase angle control) PID Heating Control up to 30Zones & synchronization of 5 Motors at various locations & functions.

The no of successful & repeated installation at various sites says the successful story of the system.

Four Line LCD Display
To show various parameter’s as per requirements.
Set Tension
Shows the set tension.
Web Tension
Shows actual web tension.
Line Speed
It shows web speed in meter / min.
Counter
Shows material length in meter.
Time
Total process ON time in minutes.
Output voltage
Shows output voltage to the Brake/Motor.

 
No manual set valve
 
PURETRONICS web tension controller stores the last output voltage to Brake / Motor, whenever machine is stopped or power Off takes place it starts the machine with old memorized value, which gives least variation in the tension, gives the leading edge.

 
User's Friendly
 
For Operation easiness, 10 turn Tension set pot is provided to set the desired tension. Start ON - OFF switch with indication.
 
Application
 

In All Continuous Web Processing Machines.
Roto Gravure Printing Machine.
Flexo Graphic Printing Machines.
Plastic Films Lamination Machines.
Slitting Machines.
Paper Manufacturing Machines.
Continuous Stationary Presses.
Paper Slitters & Rewinders.
Foils Processing Machines.
Magnetic & Adhesive Tapes Machines.
Blown Films Extrusion / Tabing Machines.

 
Technical Specification
 

Optically Isolated Digital Input’s.
Electrically Isolated Load Cell Signal With Separate Power Supply For Stable Result.
Electrically Isolated Output Analogue Voltage.
Electrically Isolated Drive Current Signal.
Design To Sustain Wide Power Variations Without Disturbing The Performance.
Under Voltage Tripping Circuitry.
Relay Change Over To Other Interlocking.
External Interlocking Possible.
RS 232 Communications For Remote Operation.
Separate Card For Interface.
Master Card Is Isolated To Sustain Any External Misuse.
FRC Cable System For Handy, Neat System.
Separate Power Supply Card & Transformer For Brake.

Description / Specification of Brakes And Clutches

We are involved in offering a wide range of Brakes And Clutches to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Brakes And Clutches. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Description / Specification of Pneumatic Brake And Clutch

We are involved in offering a wide range of Pneumatic Brake And Clutch to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Pneumatic Brake And Clutch. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Features
BUNCHED / STANDING CONDUCTOR CAN BE WELDED WITH THE HELP OF CERAMIC TUBE WITH THIS MACHINE.
Features

Use with Ceramic Tube.
Useful to run the wire on Automatic Machine under tension
No Brake of wire during running from the Weld Point

Technical Specification

Standing Wire / Solid Conductor
Range - 2.0 Sq mm to 6.0 sq mm
Material: Copper / Aluminum

 
Applications
 

For Wires & Cable Industries

SECOPTA develops and produces laser-based sensor technology for industrial and security applications. The technology relies on a compact, industry approved solid state laser (of the parent company CryLaS) and is powered by proprietary software (neural nets).SECOPTA´s mine searching system LIBS-PROD – which is based on this platform System also analyze s the atomic composition of surfaces. Secopta provides customized analytic tools based on laser spectroscopy. The applied techniques allow online, on-site and in situ measurements.

 
Working Principle
 

The FiberLIBS is a free beam LIBS system for surface element analysis. It works with a laser focus diameter less than 200 µm and needs a visible defined target on the surface. By the atomic composition in the measuring point it is possible to determine the sample material and to detect and determine contaminations on surfaces. With a laser pulse rate up to 100 Hz the system is able to send out up to 100 analysis results per second.

 
Features
 

Composition of materials
Online: fast measurement
Onsite: small sensor head
Insitu: no sample preparation
Contact free measurement
Outstanding long term stability
Fully automated operation
Flexible self learning algorithm

 
Application
 

Industry Applications                    
Surface analysis
Recycling
Quality assurance
Plagiarism defence
Mining – copper ore concentration
Security Applications
Detection of explosives
Detection of biological and chemical hazardous substances
Land mine detection (Awarded with the “ Technology Award 2007” of the German Defence Industry)

“Puretronics” presents LOAD CELL for various automation applications to cover most of the automation in converting or process machines. The range of Load cell produced by Puretronics satisfy all demanding applications and can be used for measuring the tension value of all materials including paper, cardboard, plastic film, foil, rubber and wire.

“Precision measurements of web tension is essential to ensure consistent product quality and to maximize productivity Different models are available to meet the requirement like Flat type, Round type and Round Hollow type.

“Pure” series of tension sensors are full bridge, strain-sensitive load cells, with built-in self-aligning bearings that make them suitable for dead shaft or live shaft applications. These are generally used in pairs to support tension sensing idlers on either ends. Standard ratings cover a range from 10 kg to 2000 kg in different sizes. Adaptable for base or flag mounting.

 
Type of Load Cell
 

TYPE
Model
CAPACITY
SHAFT OD
MOUNTING
SINGLE OUTPUT
ROUND
AR-85-20-17
5Kg to 50Kg
17mm
ON WALL
20mv/10Volt
 
AR-85-50-17
50Kg to 100Kg
17mm
ON WALL
20mv/10Volt
 
AR-118-100-25
100Kg to 200Kg
25mm
ON WALL
20mv/10Volt
 
AR-125-100-25
100Kg to 200Kg
25mm
ON WALL
20mv/10Volt
FLAT/PILLOW
UPB- - - XXXX - 40
100Kg to 2000Kg
25mm
BASE MOUNTING
20mv/10Volt

 
Round Type Load Cells (Model No. - AR-85-20-17/ AR-85-50-17)
 

These load cells are designed to be mounted directly onto the ends of the tension measuring roll and are able to indicate with high precision the resultant tension forces being applied. The commercial success of this model, designed for tension control with laminates, is due to the combination of its compact size which allows its use in confined spaces, and it’s very high level of quality and reliability.

 
Round Load Cells (Model No. - AR-125-100-25)
 

AR-125-100 load cell can be used for through shaft assembly application. Mounting kit data are indicated in the table below. These load cells measure the applied force, and give an electric proportional signal, repeatable and free from hysteresis, which can be used for any kind of regulation 

 
Flat / Pillow Type Load Cells (UPB- - - XXXX – 40)
 

Under Pillow Block (UPB) series load cells are of sealed construction, designed for demanding industrial applications Suitable for live and driven shafts. Ideal for high tension, high speed applications.