Raw material are charged as a batch & is subjected to indirect heating while undergoing rotary action. The conical shape of the dryer ensures efficient circulation of hot liquid heating media. The drying operation is being at low temperature under vacuum, that is why it is economical & effective for drying pharmaceuticals, temperature sensitive or easily oxidizable products. When the solvent is present in the wet powders, the recovery of solvent is easily possible. 

Drying take place when the dryer is heated from outside through jacket & vacuum is applied from inside. The drying operation is based on the principal that water or other volatile product moves from a zone of high vapour pressure to a zone of low pressure. This is accomplished by warming the product to be dried to raise the vapour pressure of the absorbed or free liquid, by decreasing the vapour pressure of the gas by vacuum, or by sweeping it away with an air current. Thus the essential conditions for effective drying are efficient & uniform heat transfer throughout the batch & rapid removal of the vapors.

The dryers are designed to meet customer's requirements flexibly & efficiently.

Material of construction : AISI304-304L/316-316L

We provide Quality Documents like D.Q / I.Q./ O. Q. & Operation Manuals with all test Certificates. We Also provide test & calibration certificates with each instrument & traceability to National & International standards.

Low temperature drying under the state - of - vacuum inside.

Very High efficient for uniform drying in a short time as co-efficient of thermal transmission is high.

Dryer can be used for mixing / blending in its single unit.

Solvent recovery can be carried out

Specially designed micro air filter can be provided on receiver while breaking vacuum for safety operation.

Easy to clean.

The discharge of the dried material is easy due to the conical configuration of the dryer & it is possible to fix vibrator.

Nitrogen purging system is available for mechanical seal as well as for cleaning filter.

Specially designed S.S Rotary union is available for hot liquid inlet & outlet.

A self - cleaning butterfly discharge valve

Mode of heating is indirect through steam / hot water or hot oil.

Internal cartridge filter for fine powders with effective surface area.

Available in STD / GMP / cGMP / GAMP / GLP / GCP & LAB models

Ease of inspection & easy to clean with the large optional inspection port door.

One or Two chopper units inside the drying chamber provided for breaking up lumps of the product.

Product sensor / sample nozzle with valve can be provided on charging port.

Internal mechanical seal can be easily detached & removed.

We provide mechanical seal from external side for easy maintenance purpose.

We also provide mechanical seal even for smaller units.

Water heating system or Thermic Fluid (Oil) heating system can be provide for heating / cooling of the main dryer

The complete drive, Nitrogen purging system with vessel & spur pinion are housed in the side 'A' shaped stand imparting a cGMP finish to the dryer. no moving parts of drive & gears are visible from out side.