This machine used for filling injectable powder into vials & then half or full bunging. The machine operates with vacuumetric filling principle for precise fill volume accuracy.

• Sensor and solenoid valve system ensures no vial no fills.
• Spring loaded Teflon top seal for powder hopper reduces the friction to avoid chance of White particle shading during production.
• Doctor blade and wiper blade can be adjusted from outside also without disturbing any production, which saves lot of time, powder wastage and chances of area condition disturbance.
• Each port is numbered for accuracy inspection and for micro settings.
• Multiple dosing of injectable powder for higher volume.
• Special clutch devices are provided on vial separator for safety purpose.
• Vibratory bowl for rubber stoppering unit support to run machine with total claimed speed of machine. Optionally vacuum type bunging is also provided for half bunging for lyophilized vials.
• Pre and Post gasing unit for Nitrogen or Carbon Dioxide flushing.
• Speed : Single Head up to 120 vials / min. , Double Head up to 240 vials / min.
• Suitable for various sizes of caps.
• Available up to 12 head depending up on output requirement.
• Due to the special safety device on star wheel shaft, it prevents any damage to the working parts in case of jamming or over loading.
• "No Container, No Cap, No Capping".
• Perfect synchronization between conveyor and star wheel is achieved by using single motor only.
• Vibratory / Mechanically oriented cap feeding arrangement can be provided.