LLOYD INSULATIONS INDIA LTD.
Featured Products
Highest quality standards are achieved through the implementations of latest technology, decades of experience and everlasting moral values , which have helped us to retain our customers as well as multiply them.
Welcome to LLOYD INSULATIONS INDIA LTD.
Supertherm Pipe Support
SUPERTHERM PIPE SUPPORTS
A heavy duty easy to install prefabricated pipe support system of truly revolutionary proportions Supertherm Pipe Supports are made from specially formulated chemical systems that result in high density rigid polyurethane foam. The very nature of the material immediately yields several advantages.
| Property | Advantages |
| Wide density range possible | Higher densities enable higher loads without increase in surface area. |
| Pre-engineered at our factory | No sawing and Shaping at site. The support precisely matches pipe's OD. Installation time dramatically reduced. |
| Material has a closed cell structure | Does not permit water penetration. No wet rot. No dry rot. |
| Excellent 'K' value | Provides vastly superior insulation as compared to timber and other materials. No condensation at support point. So no drips, puddles or energy wasted. |
| Good fire resistance | Improved safety at site. Improved durability. |
| Close dimensional tolerance | Pipe Support thickness precisely matches insulation thickness, resulting in neat finish at support location. |
| Supplied in assembled condition, complete with all metal attachment | Improved speed of installation. Joint-free in the load bearing area, even for larger diameters of pipe. |
| Special sizes, shapes and finishes | On request Non-standard sizes and shapes can be manufactured to suit specification. Supports can be supplied with a factory-applied coat of fire-resistive mastic, which also serves as a vapour barrier, on the exposed surface. |
Physical Properties for different Densities
| Density (kg/m3) |
% Closed Cells | Water Vapour Transmission (gms/m2/24hrs) | Compression strength (Kpa) | Tensile Strength (Kpa) |
| 80 | 93 | 50 | 900 | 1200 |
| 120 | 94 | 45 | 1500 | 1600 |
| 180 | 94 | 30 | 2900 | 2500 |
| 250 | 96 | 25 | 4900 | 3100 |
| 320 | 96 | 15 | 8200 | 5000 |
| This system is 'CFC FREE' and has been designed within the Guide lines of the Montreal Protocol, 1987, for the protection of the Ozone layer. | ||||
Comparison with Wood
| Wood | Density (kg/m3) |
'K' Value at 10°c | Max. Temp °c | Min. Temp °c | Fire Rating |
| Oak | 740 | 0.159 | 65 | 0 | Poor |
| Mahogany | 560 | 0.144 | 65 | 0 | Poor |
| Supertherm | 80 | 0.023 | 110 | -185 | Class P as per BS: 476 Part-5 for ignitability |
| 120 | 0.031 | 110 | -185 | ||
| 160 | 0.033 | 110 | -185 |
Our Vision
* To embrace new technologies and methods. * To give unsurpassed products and services to the clients. * To constantly look for improvement and changes.
