EPDM or Ethylene Propylene Diene Monomer has an excelent operating teperature range of (-45)°C to 120°C. It is highly recommended for out-door uses as it is resistant to oxidation, UV Rays and Ozone. However, EPDM does not have good oil resistance. It is resistant to many chemicals and solvents and shows a good resistance to many corrosive chemicals. It is also used for roofing sheets and weather strips.

Nitrile rubber is a co-polymer of butadiene. It has good general resistance to oil along with good mechanical properties, especially tensile strength, flexibility, compression set and impermeability to gases. It has moderate aging properties and good adhesion to metal. Its recommended operating temperature is -30* C to + 120* C . It also displays a good resistance to chlorine. It gives satisfactory resistance to general hydrocarbons.

Neoprene or Chloroprene rubber has excellent mechanical and good abrasion properties; it has a good resilience against heat, ozone and weathering and also gives good adhesion to metal. The recommended operating temperature range is between (-40)°C to 125°C. We also offer flame retardant grades.
• Width available : 1.2 Mtrs / 1.4 Mtrs / 1.5 Mtrs up to max 2 Mtrs.
• Length : From 10 Mtrs Rolls up to 25 Mtrs rolls.
• Thickness : 0.5 mm Thk to 50 mm Thk.
Further customization in polymer and sizes available.

NR or Natural Rubber is derived from latex liquid extracted from rubber trees. This rubber has excellent mechanical properties, low compression set and high resilience. It also has excellent dynamic and rebound properties. The operating temperature is from (-30)°C to 70°C. It is available in varied range of hardness's from 30° to 85° Shore A. It also has good resistance to acids, alkali and salt. It is not recommended for use in areas where it could come in contact with oils and hydrocarbons. They are special purpose high abrasion resistant rubber, made from premium quality Natural Rubber with outstanding resistance to cut, tear and abrasion used for anti- abrasion rubber lining also for material handling in mining. 
Applications: Used as skirt-board sheets, bearing pads, shot blasting sheets, high tensile applications and commercial usage with & without insertion.
• Width available : 1.2 Mtrs / 1.4 Mtrs / 1.5 Mtrs up to max 2 Mtrs.
• Length : From 10 Mtrs Rolls up to 25 Mtrs rolls.
• Thickness : 0.5 mm Thk to 50 mm Thk.
Further customization in polymer and sizes available.

Butyl Rubber has a very low permeability to air and other gases. It has excellent resistance to ozone, oxidation and sunlight, with an excellent temperature range of (-45)°C to 120°C. Butyl has a very low resilience, which makes it ideal for vibration damping and shock absorption applications but offer a moderate resistance to abrasion and compression set. With careful compounding, Butyl compound can be made to acquire good tensile strength. It is resistant to most mineral acids and alkaline. We do not recommend its use in application where resistance to oil and Hydrocarbon is required. We can offer halogenated Butyl Rubber Sheets for specified applications.

Silicone Rubber is a perfect choice for Medical, Pharmaceutical and Food processing industries. Silicone has comparatively low mechanical properties, tensile strength, elongation and tear strength, however they keep constant even at high temperatures but should not be used for high temperature steam. Its resistance to oil and hydrocarbon is fairly limited and similar to that of chloroprene rubbers. Reasonable resistance to a whole range of general chemicals but acids, alkalis, esters and kerosene should be avoided. Silicone has excellent resistance to heat up to 220°C intermittent. It remains flexible at low temperature of (-50)°C and it is also resistant to UV light, Ozone and Weathering. Exhibits low inflammability and low smoke toxicity. It has good electrical insulation properties.
• Width available : 1.2 Mtrs / 1.4 Mtrs / 1.5 Mtrs up to max 2 Mtrs.
• Length : From 10 Mtrs Rolls up to 25 Mtrs rolls.
• Thickness : 0.5 mm Thk to 50 mm Thk.
Further customization in polymer and sizes available.

These sheets are manufactured of premium natural grade rubber for abrasion, impact and corrosion resistance. These sheets provide unmatched wear performance in the toughest abrasion environment.

Fluoro Elastomer rubber or Viton has high resistance to heat with a temperature range of (-40)°C to 250°C. It also possesses a good flame resistance and is usually self-extinguishing. Viton or FKM have excellent resistance to oxygen, ozone and natural weathering and also have outstanding resistance to compression, especially at elevated temperature. Its resistance to most solvents and chemicals give long service life as it has excellent resistance against hydrocarbons, aliphatic, aromatic and chlorinated chemicals and resistance to acids and alkali including oxidants.
• Width available : 1.2 Mtrs / 1.4 Mtrs / 1.5 Mtrs up to max 2 Mtrs.
• Length : From 10 Mtrs Rolls up to 25 Mtrs rolls.
• Thickness : 0.5 mm Thk to 50 mm Thk.
Further customization in polymer and sizes available.