Needless to say, it also provides the benefits of the effective manpower utilization.

J.K.INDUSTRIES Liquid Manufacturing Plant consist the following equipments and accessories.

Sugar Syrup Vessel

Pre-filtration unit

Manufacturing Vessel

Filtration unit

Storage Vessel

Control Panel

Product Piping

Working Platform

It is specially designed to take care of two critical factors which directly affects the quality of the Ointment / Creams.

Minimum man handling of Ointment.

Negligible vacuum drop during mixing & blending. 

Needless to say, it also provides the benefits of the effective manpower utilization.

J.K.INDUSTRIES Ointment Plant consist the following equipments and accessories.

Manufacturing Vessel OR Jacketed Planetory Mixer

Wax Phase Vessel

Water Phase Vessel

Storage Vessel

Vacuum Pump

Control Panel

Product Piping

Working Platform

Material Transfer Pump to Transfer material from manufacturing Vessel OR Planetory Mixer to Storage Vessel & Storage Vessel to Ointment ( Tube ) Filling M/C. ( 02 nos.)

Description :

[Multi Column Distillation Plant]

J.K.INDUSTRIES Multi Column Distillation Plant is based on FINN-AQUA design. It consist of specially designed columns which make optimum use of the principles of interstage heat exchange (Multi effect distillation method) to produce pure pyrogen free sterile distilled water for injectables as per IP/BP specification. The vapour with high velocity and under pressure passes over a SPECIALLY DESIGNED SPIRAL BAFFLE system which develops tremendous centrifugal force and thus eliminates any chances of pyrogens carry over in the vapours. 

By Multi Effect Distillation method significant energy (75% approx) is saved when compared to the conventional method. All contact parts are made out of AISI 316 quality stainless steel and mirror polished. All pipes and tubes are essentially seamless. The unit is mounted on sturdy m.s. tubular stand and duly painted by epoxy paint. 

Operation:

FLUID BED DRYER is designed to introduce the hot air stream at the base of the product container which is filled with the material. Induced draught is created by means of blower and fresh air is sucked in to the unit. The fresh air is heated by means of electrical heaters or steam or thermic fluid heaters. This hot air stream expands the bed of material at certain velocity & reating turbulance in the product. The phenomenon is known as fluidisation and offer conditions which are almost ideal for drying. Fluidisation produces full agitation of solid particles and since each particle gets surrounded by hot air, heat transfer is extremely high and uniform. The product is dried fast without appreciable loss of heat. Filter bags prevent particles escaping from the dryer.

Construction :

"J.K.Industries" Tray Dryer / Drying oven is fabricated out of rigid angle iron frame with double walled panels insulated with best quality compressed fibre glass and with a rigid door fitted with strong hings and best choosen locking arrangement. A control panel is fixed in front of the oven to facilitate the operation easily. It has a large working space and is available, manufacturing from mild steel & in good finishing outside with synthetic enamel colour & inside painted with heat resistent paint to resist temperature up to 300 degree, in Standard Model. It is also manufacture completely from SS304 or SS316 ( As per customer requirement ) in GMP Model & polished to the mirror finish from inside & matt finish from outside.

Operation :

[Rapid Mixer Granulator]

Rapid Mixer Granulator is designed to achieve excellent mixing and consistent granules at lower operating cost along with higher productivity. Better mixing and closed control of granule size leads to faster tableting speeds with improved quality and least rejections. 

Introduction:

J.K.Industries Multi Mill is a self contained portable unit useful for high speed GRANULATING, PULVERISING, MIXING, SHREDDING AND CHOPPING, etc., of a wide range of wet and dry materials without special attachments. As compared to the four common principles of size reduction i.e. grinding, compression, impact and shearing, which often do not produce controlled size reduction, this machine utilises the principle of variable force swing hammer blades having both knife and impact edges rotating with a carefully selected screen to control size reduction. Flow path of material in vertical rotor machine is streamlined. During comminution, material entering the chamber travels to the periphery and passes through the screen tangentially and radially, avoiding chocking and temperature rise.

For over a quarter of a Century, J.K.INDUSTRIES Industries have been supplying stainless steel tanks and process equipment to the brewing, beverage, food, waste, pharmaceutical and chemical industries. We also supply mild steel tanks.

we handle the increasing demand for high quality stainless steel storage and process vessels from a wide range of industries – each with its ownrequirements.

J.K.INDUSTRIES manufactures STORAGE Vessels from 50 litres to 180,000 litres which can be used for various applications, with the following accessories/attachments.

Jacket for heating/chilling/maintaining the temperature of the product within the vessel
Electrical trace heating of the vessel to maintain product temperatures 
Cladding in either stainless steel (welded or riveted) or riveted aluminum to maintain internal temperatures 
Attaching a mixer/high shear blending unit to the vessel 
Ensuring that the vessel is suitable for CIP, including spray balls etc.