In general the Square Shape Cooling Tower or square type cooling tower designed for alternative to round model for selection to our buyers.

JC FRP Cooling System consists of quality Honey comb PVC fills to maximizes economy eliminators in a design for efficiency directly driven fan Minimum drift Losses due to Motor with spray Nozzles.

Hot dipped Galvanized hardware with rectangular casing body in elegant design.

The Round Shape FRP Cooling Tower may call as Bottle Shape . The casing and basins are designed to withstand severe vibration, high wind load and to resist corrosion.

The JC FRP Bottle shape Cooling Tower consists of Honey comb PVC fills and eliminators in a design that maximizes economy and efficiency and directly driven fan and Motor 'Minimum drift Losses'. Uniform distribution of hot water by rotating arm sprinkler.

Hot dipped Galvanized hardware to withstand wind forces. The bottle shape makes possible to provide maximum cooling efficiency in minimum plan area with lower energy consumption.

Wooden Single Flow and Double Flow induced Draft Cross Flow
Direct Drive System.
Reduction Gear Box Drive Suystem.
Counter Flow Square / Rectangular Induced / Forced Draft Towers.
Packaged Wooden Double / Single Flow Induced Draft Cross Flow.
Fan-less Induced Draft Wooded Cooling Tower [ Atmospheric Natural Draft Cooling Towers].
Re-Inforced Concrete Cooling Towers.
Spares For any Type and Make of Cooling Systems.

Why JC Dry Cooling Tower?

Dry cooling tower be able to a great extent speed up the Planning approvals process.
Options are ever-increasing expenditure premiums are falling.
Preservation expenses a great deal reduced
Legislation is able to protect water provisions to power stations in droughts
Also we experience of more than 23 years in the industry of cooling tower manufacturer
Dry Cooling Tower Benefits are: Very economical in cost, Conserving significant 
amount of water, Minimizing environmental impact.

Features of Natural Draft Cooling Tower

No requirement Fan, Motor and PVC fills.
Well planned and designing
Power saving and Low maintenance
Superior Cooling good organization
Installed for various type of cooling applications
Easy to cleaning and maintenance
Environmental Friendly
No Mechanical Noise
Safety of operation

Range of our RCC Cooling Tower Capacity 200CuM/hr. to 3500 CuM/hr. per cell
Package type (Range from 5TR to 500TR).
High effectiveness mechanicals such as gear boxes, axial flow fans and drive shafts.
Spiral Bevel type Gear.
Higher capacities are offered in multi cell production.
Available sizes are 1Cell to 18 cells.
Privileged capacities are offered in multi cell production.
Wood used can be preferred by the customers
Types : Cross Flow and Counter Flow.

We may well include various percent of the cooling water from the available water resources to the closed circuit cooling system and we be able to decrease the cooling tower size.

Mixing ration means the percentage of the added water. If our mixing ratio is zero, it is called absolutely closed system. When the mixing ratio is 100%, it is called an open system.

Closed Circuit Cooling Tower Water Temperature

Closed Circuit Cooling Towers are accomplished of incoming fluid temperatures as high as 180ºF (82.2ºC),.

Closed Circuit Cooling Tower Design

Our Closed Circuit Cooling System gives completely rated thermal presentation, which also by yourself verified over special types of flow and high temperature requirements. Closed Circuit Cooling Towers are high effciency and water saving.