Special Features : Equipped with an automatic reset motor protector/heavy duty bearing High efficient copper wound motor / In-build lip seal to prevent ingress of slit / With / Without float switch.

Application : Submersible Sewage Pumps can be use for Draining sewage water from hotels, houses, commercial building, complexes etc. / Pumping waste water in industries / Pumping sewage water from stock farm and manhole sewage / sewage treatment plant / pumping municipal sewage water / Septic tank / Leather factories.

SPECIFICATION :

 Power range  0.37 - 1.5 kw (1 phase) 0.37 - 7.5 kw (3 phase)
 Speed  2850 rpm
 Degree of protection  IP 68
 Motor type  Oil - Filled / Dry
 Impeller type  Semi open / Vortex
 Insulation type  "F" Class
 Version  A.C. 50Hz (230V-1 Phase / 415V - 3 Phase)
 Direction of rotation  Clock wise (when viewed from driving end)
 Duty  S1 Continuous

Applications :

The Submersible De Watering pumps are portable and are intended to be used for pumping of water from Construction Sites, Tranches, Mines, Power Station, Water Supply, Flooded Cellar etc...

Special Features :

Deep grove ball bearings with high temperature grease filled. High efficiency copper wound motor/In built lip seal to prevent ingress of silt and sand. Liquid passes through annular space between motor body and outer cover keeps motor cool.

Material of construction & Engineering Data

MOTOR (DOL START) 2 Pole Induction continues rated motor with squirrel cage rotor. Stator insulation class "F" (155 C) Speed: 2800 RPM (Approx) Power rating : 1.1 Kw (1 Phase & 3 Phase) 1.5 Kw (1 Phase & 3 Phase) Current : 8 Amps; 2.5 Amps; 11 Amps; 3.8 Amps Respectively Maximum Start / stop Per hour : 10

POWER SUPPLY : 415 V, 3 Phase 50 Hz, AC supply. 230 V, 1 Phase (with Control panel).

BALL BEARINGS : The rotor shaft is carried in two single row, deep groove ball bearing. The bearings are filled with high temperature grease containing special anti-corrosives additives ensuring no maintenance required for life.

 

POWER CABLE : Water proof / oil proof, PVC insulated double sheathed, copper conductor flexible cable of size. 4 Core 1.5 sq.mm. 15 meter length for model CFDW 150S / 150T. 4 Core 1.5 sq.mm. 15 meter length for model CFDW 200S / 200T.

SHAFT SEAL : Oil bath type double Mech-Seal & Oil Seal ensures a longer pump life.

CORROSION RESISTANT : Outer & Inner stator in SS 304. Rotor Shaft SS 410 Impeller SS 410. Also available in SS 304 (Optional) Nitrile rubber Moulded Diffuser.

STRAINER :

MS epoxy coated with 6mm round holes, also available in SS (Optional).

SUBMERGENCE :

Submergence below liquid surface min 25mm, max. 10 mtrs.

FEATURES AND DESIGN ADVANTAGES :

Absolutely no wastage of water.

Frame is rubber coated to avoid damage to the Swimming pool tiles.

Light weight, easily maneuverable on adjustable nylon wheels in & out of water.

Can work as de-watering pump when required.

Rugged submersible motor with inner mech. Seal & secondary outer lip seal.

Available in 0.5HP in 1 Ph                       1.5 HP in 1Ph & 3 Ph                       2.0 HP in 1Ph & 3 Ph

Salient features :-

High quality Aluminum extruded body

Compact monobloc construction

Easy to install

Satisfactory performance at wide voltage range

Wide range of operating heads with maximum efficiency.

Very smooth and silent operation. 

Applications:-

Chemical and Pharmaceutical Industries.

Textile Processing Industries.

Electroplating & Metal Finishing Machines.

Filtration Units.

Pure Water Plant, Pilot Plant.

Technical data :-

  Motor :-

TEFC cap. start & run motor suitable for 230 volts, 50 Hz, Single phase

415 volts Three phase A.C. supply

Windings are impregnated with class "F" insulation.

Adequate  size of ball bearings is used to take max. Radial and Thrust load.

  Pump :-

Pump portion is made up of SS316 - Volute Casing, Impeller and Back Plate.

Mechanical Seal : TC V / S TC with polymer in VITON.