Working on the same principle as a refrigerator, moisture-filled air is drawn into the dehumidifier and passed over a cold, ‘refrigerated’ coil. The damp air condenses on the cold coil into water droplets which are collected in the water tank. The air is then passed over a warm coil and sent out from the dehumidifier, producing clean, dry air.

We are one of the leading manufacturers, suppliers and exporters of a wide range of Natural Bio Gas Dryers. High grade stainless steel is used in manufacturing of these dryers so as to ensure its high strength and corrosion resistance. Owing to their sturdy construction, efficient performance, minimal maintenance and longer service life, our biogas dryers are highly applauded in the market. Natural Bio Gas Dryers are widely being used in cheese plants, digester gas dehydration and breweries.

The main purpose behind using Bio Gas Dehumidifiers is that it is used for removing moisture from biogas and increases CHP efficiency. Moreover, these products also help in lowering fuel gas consumption and also lowering down the requirement of oil changes. The corrosion resistance body of the available range minimizes the long term maintenance costs. These dehumidifiers does not require extra space to get installed, thus can be incorporated into existing systems. A standard design comprises of gas to the cold water heat exchanger that is equipped with an industrial grade water chiller. By reducing the temperature, dehumidification happens and water vapors get condensed. The use of these dehumidifiers can enhance the service life of an engine and allow them to perform efficiently.

Our enterprise has gained immense recognition in manufacturing, exporting and supplying a quality assured array of Air Washer. Our offered washer is widely used for removing dust particles from the air. The washer provided by us is manufactured by making use of excellent grade components with the aid of advanced techniques in line with international quality standards. Apart from this, clients can avail this Air Washer from us at rock bottom prices

Micro heat regenerated adsorption dryer works in a twin-tower alternative operation mode. Compressed air enters the dryer’s tower A through valve 1A (1B is closed), then is dehydrated and dried under the unique adsorption action of the adsorbent. Finished gas flows to the gas using point through valve 5A (5B is closed); meanwhile about 5% dry air source enters tower B through valve 4B (4A is closed) after being heated by the heater, the adsorbent in which is regenerated after a certain period of heating. Cold blowing begins when heating is stopped, which cools down the adsorption bed in the dryer’s tower B (for use in the next cycle). Finally, the air is discharged into the atmosphere through muffler. Before switching in the second half period, turn off valve 2B and open valve 1B to equalize the pressure in the two towers (to ensure pressure stability when using the gas and avoid the impact and jitter of the dryer), and the second half period work begins at the same time (the dryer’s tower B works and tower A regenerates). The process is similar to that of the previous half period.