Polypropylene process pump is a horizontal single end suction standardized process pump. PP series process pumps are supplied with mechanical seal/gland packing arrangement covering 85% of chemical industries requirement. 
      The pumps are manufactured from polypropylene copolymer-a chemically inert thermoplastic by the use of an exclusive moulding process. These pumps give you unusual protection against highly corrosive chemicals. The solid moulded casing and impeller ensure a smooth running pump for long life and a minimum of wear. 
      All pumps, shafts are fitted with sleeves of different materials compatible with the liquid handled.

Constructional Features 
       Top centerline discharge, self-venting casing arranged for back pull-out. Fully confined gasket. Foot support under casing for maximum resistance of misalignment and distortion from pipe loads . 
       ANSI-B-16.5 (Class 150) flanges standard, ANSI-B16.5 (Class 300) optional for working pressure to 2550 kpa with 3mm corrosion allowance. 
       For maximum corrosion , erosion resistance casting is supplied without tapped openings but gauge and drain plug openings are provided when specified. 
       Impeller matched to casing for high efficiency and low NPSH. Fully open, has partial shrouds for maximum vane support without high thrust iherent in closed impellers. 
       Stuffing box pressure reduced and entrance of solid prevented by back pump-out vanes. Large smoothly contoured flow passages combine best slurry and solid handling ability. 
       Impeller is locked on shaft with impeller lock-nut and are sealed by PTFE gasket. State of the art casting methods smoothest possible surfaces for highest efficiency. 
       All impellers are statically and dynamically balanced.

  PCF Process Pump is signle end suction standardized back pull-out process pump in accordance with ISO2858/DIN24256. 
       The PCF series process pumps are single piece, self venting radially split volute casing with vertex discharge, close redial impellers have back vanes for hydraulic balancing & reducing stuffing box pressure. 
       Dry shaft construction preventing liquid contact with shaft.

 SPM is a signle stage, Horizontal, Centrifugal, Self Priming, End suction Coupled pump.Automatic and quick self priming, no foot valve required. No priming of suction pipe line. Sturdy construction, and simple design. 
       Minimum maitenance required. Non closing and handles soilds up to 17mm.

       Positive displacement external Rotary Gear Pumps are most efficient and ecnomic range with varity of materials, which has special features like simple & compact design, Low noice level, High in efficiency and easy to maintain. 
       These pumps are ideal for handling oils and viscous liquids like all kind of Fuel oil, Mineral oils, Lubricating oils, Fish and Animal oils, Vegetable oils, Tar, Asphaltants, Sugar Syrups, Molasses, Starch, Inks, Paints, Colors, Varnishes, Viscous chemicals etc., 

The unique pumping principle applied, employs a highly precision manufactured Metalic single helical rotor turning inside a double internal helical resilent stator. Thereby forming cavities confined by a "Sealing Line" which is maintained at stand still and during rotation. Whilst the rotor rotates in the stator, the cavity formed between them progresses from suction to delivery side, gently carrying the medium. 

Hacop barrel pumps are widely accepted barrel and container pump for handling highly viscos fluid & liquid upto 560 Cp. 
      
Pumps has been designed such that it can be used for various containers ranging from 25 Lts. Carboy to 500 Lts. barrels. 
      
Pumps are available in three different pump tube lengths i.e. L=700, 1000, 1250 mm. 
      
Application : Pharmacueticals, Cosmetics, Food, Breweries, Distilleries, Chemicals, Paints, Pesticides, Engineering, Textiles etc.,
      
DRIVE : ELECTRICAL OPERATED 
      560 Watts, 15000 rpm, Single Phase, Universal, Motor Operating on 220 Volts, 50 Cycles A.C. supply, Shock proof and Chemical Resistant Body.