CNC turret punching is a cost effective method for cutting sheet steel in moderate to long runs. It has vast tooling potential for the increased versatility. This means ability to produce variety of components without re-tooling. This results in significant saving in production cost and noticeable increase in productivity. This has a great impact on job work cost and so we are able to do job work with excellent quality at affordable cost..

We have CNC Turret punch presses of reputed makes such as Trumpf and Amada with a bed size of 1.25 x 2.5 mtr and tonnage range of 20 to 300 Tons. We have a large stock of the tools required for turret punch press operations.

BENEFITS OF CNC TURRET PUNCH PRESS

• The CNC Turret Punch Press gives high productivity in an economical way.
• It has the ability to produce variety of components without re-tooling and thereby saving in production cost.
• It is best suitable for regular and repetitive job work

We have State of the art machinery, High capacity material handling cranes, Latest software tools and Skilled work force to produce best results in each of these there areas.

With these facilities we can manufacture Sheet steel fabricated assemblies from few Kgs. to few Tens of Tons.

DESIGN & DEVELOPMENT

Advance software tools are used to create 3D model of product as required by the customer. These are then unfolded with software to get developed drawings of flat product. These drawings are then processing through programs of CNC Laser cutting machines and CNC bending machines.

We use software tools like Autocad, Radan 3D design, Radan BendCNC, Radan Nesting and Trumpf Tops100 for Laser cutting and Bending operations. Usage of these software tools enable us to cut and shape precision components with minimal wastages and faster speed. In turn we can supply products faster and economical.

Production

With the aid of software programs parts are cut in Laser cutting machines. We have state of the are Laser cutting machines which can cut parts with extremely low tolerance levels. These parts then pass through the process of shaping i.e. they are then bent using CNC press brakes. We have In some cases, as per the design parts are punched in CNC Turret Punch Presses.

Fabrication

After cutting and bending/punching processes various parts of assembly are sent for fabrication where they are joined by riveting, welding or screwing. This is another critical area for Sheet steel fabricators, as smallest deviation from tolerance limit can cause wastage of entire assembly.

We have latest welding facilities for MIG/MAG/TIG welding, Projection welding, CO2 welding and Gas welding. To add precision to these operations

we deploy out of the box tools such as Demmeler Modular fixtures, Welding Robots, etc.

The fabricated assemblies are sent for surface preparation and coating. A sheet steel assembly surface needs to be prepared for coating as there are several not uniformities and impurities that can act as a hindrance for protective coating. In order to ensure a good bonding between the metal and the protective coat, various methods like shot blasting, liquid dipping are used depending on the type of material. After preparing the surface, the assemblies are coated by powder coating, Epoxy Painting or Zinc Plating, as per requirement.

We have latest facilities of shot blasting, seven tank treatment, etc. for surface treatment. We have powder coating and epoxy painting facilities at our manufacturing plants.

We practice Lean Manufacturing Process at all our manufacturing Units; Which is explained below :

Traditionally CNC programming is done on the shop floor, on the CNC controller of press brake. However, it can result in wrong bending resulting in scrap if the drawings are interpreted wrongly resulting in wastage of material. However, we use software like Radbend CNC which defines the bending sequence, finger stop placement, simple programming for CNC controller resulting in high productivity and lower wastage in terms of shop floor press brake time. It also stimulates the bending process detecting collusion. This results in lower wastage, in turn economic manufacturing at faster speed resulting in quick deliveries.

We have a wide Range of Press Brakes of Trumph, Weinbrenner, Hindustan hydraulics, LVD, Bronx makes installed at various manufacturing plants with capacity ranging from 110 Tons to 400 Tons and Ram length from 2 mtrs. To 5 mtrs. We can offer Bending upto 10 mm thickness for sheet steel. The knowledge and experience of press brake operators that helps guarantee part accuracy and economy, knowing this well we provide the training necessary to give that expertise to the operators in the first place and time to time we organize training sessions within organization to update the operators about new techniques and tools to improve productivity.

The CNC laser cutting machine is used to cut metals such as Mild Steel, Stainless Steel and Aluminum with high precision and speed. Laser provides excellent cut quality and productivity on material less than 6 mm. Laser technology has high capital equipment, running and maintenance costs, therefore a high level of business volume is required to pay back the cost of the equipment. We have state of the art CNC laser machines of renowned makes such as "Trumpf ", Germany and "Bystronic", Switzerland. We have a variety of these machines which can laser cut Sheet metal of varying thicknesses and sizes with bed sizes ranging from 1.25 x 2.5 mtrs and 2 x 4 mtrs. Our expert team of programmers and operators at each manufacturing location are geared up for execution of complex component laser cutting.

With input as a drawings or a finished sample part provided by customer. We have modern vacuum lifting systems for loading sheets on to the laser bed, by the aid which we have overcome sheet handling constraints and enabled faster throughput. We have an independent UPS back up of 10 minutes duration for each laser cutting machine which ensures continuity in operation even when there is a power failure. The UPS keeps the machine in operation till changeover is done to DG. We also have 5-Axis CNC Laser Cutting Machine The Company has brought a 5 Axis Laser Cutting System of PRIMA make. The machine is their largest model "OPTIMO" and has a cutting envelope of 4500 mm x 2500 mm x 1020 mm. It has a work volume of X : 4500mm, Y : 2500mm & Z : 1020mm with rotary axes : A : 360° continuous (without limitation) & B : +/- 135° continuous (with respect to the vertical).